Body Life LASERSERIES User manual

Machine screen
Emergency Button
ND yag handle connector
ND yag laser handle

Screen
10.4inch color touch screen
Cover
High quality ABS material cover
Laser type
Q-switched ND:YAG laser
Laser wavelength
Standard： 1064nm 532nm; Optional: black baby
Frequency
1-10Hz
Cooling system Wind cooling+Water cooling+ Semicondutor
Light source 220V/110V 50Hz/60Hz
______________________________________________________________
_____________________________________________________________
Brand Body Life
_______________________________________________________________
Code TR1064

l1.Clean skin
l2.Connect the handle and footswitch .(See Machine Setup)
l3.Filling water.( see Machine Setup, attention , you must fill in water before
open the machine )
l4.Choose Treatment head:1064nm,532nm. 1064nm is for black and blue,
532nm is for brown and red. Then fix it in the laser gun.

l1). Open the machine, enter into “welcome” menu , then press the any place of this
menu , machine will enter into following working menu

2).Press yag,and enter into following menu:

1. :the Upper blank is for single count,the below blank is for double count,
button stands for reset count.
2. :this is for Frequency showing,press the upper row and below row to adjust
frequency,the frequency can be adjusted from 1-10HZ

3. :the energy rang from 1-2000MJ,adjust according to customer’s
physical condition,can adjust under treatment.
4. :this button shows water temperature,when it is up to the alarmed
temperature,machine will alarm.
5.the icon meaning according to front page to show.

After finishing the operation,you have to release foot switch first,secondly press
down key,back to status,then close the machine by key switch,
operation is finished.
Warning
!

lDaily Life
1.Do to go to High temperature places in 3-5 days after treatment,such as sauna, Hot
spring,sunbathing
2.Do not smoke,drinking,stay up all night 3.Pay more attention when make-up
remover.
1.Keep the treatment head clean with cotton bud. 2.Change the water after 10-15
days.
3.If there's no laser emit from the treatment head,to check if the system come into
[Ready],or check if the foot switch connect well or not.
4.If the emit laser become very weak or no laser ,to check if the treatment head clean
or not,or the water circulation is good or not.
5.If do not enter into [Ready],to check if cooling water enough,or water circulation is
good or not.
6.If do not open the machine,to check if the power line connect well,fuse is good or
not,emergency switch is open or not

Bbe
fore
Af
te
r
Bbe
fore
Af
te
r
Bbe
fore
Af
te
r

    
 
 

 
 s 1
 
