BODYGUARDZ PURE 2 User manual

BodyGuardz Pure 2 With Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
WARNING: This product is made of glass and should be handled with care if broken.
bodyguardz.com
1. Adhesive Release Liner
A clear lm covering the adhesive side of the protector.
2. Glass Protector
The thin, ultra-strong glass that safeguards
your device screen.
3. Cap Sheet
A clear lm to shield the glass and
help with install alignment.
4. Installation Guide
A plastic guide that precisely aligns the
glass protector to your device.
5. Cleaning Kit
An alcohol wipe, a microber cleaning cloth, and dust
removal stickers to prepare your screen for installation.
1
2
3
4
5
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit
Instructions on reverse
Installation Instructions
Place installation guide around the
device, pressing down for a snug t
around the phone.
21
43
While holding the protector, peel o
the release liner to expose the adhesive.
Then, use the installation guide, camera,
and sensors to align the protector
on the device.
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently tap
the dust removal sticker over the surface of
the screen to remove any dust particles.
Once aligned, run your nger rmly down the
middle of the screen to begin adhesion. Then,
peel o the cap sheet. Finally, remove the
installation guide by lifting from the bottom.
Install Video: bodyguardz.com/install
Any remaining bubbles should disappear within
24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to pull out
any trapped dust. Carefully lift up the corner of
the glass closest to the dust particle and place the
sticky side of the strip against the piece of dust.
Then, pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the glass
o your device.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may carry
additional fees and conditions.

BodyGuardz Pure 2 Without Install Guide
INSTALLATION INSTRUCTIONS
Installation Instructions
While holding the protector, peel o the
release liner to expose the adhesive.
21
43
Align the protector over your device and
gently lay it down. When placed, run your
nger rmly down the middle of the
screen, then side-to-side to adhere.
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently tap
the dust removal sticker over the surface of
the screen to remove any dust particles.
Use the included cleaning cloth to push out any
bubbles, then peel o the cap sheet.
Install Video: bodyguardz.com/install
1. Adhesive Release Liner
A clear lm covering the adhesive side of the
protector.
2. Glass Protector
The thin, ultra-strong glass that safeguards
your device screen.
3. Cap Sheet
A clear lm to shield the glass and
help with install alignment.
4. Cleaning Kit
An alcohol wipe, a microber cleaning cloth,
and dust removal stickers to prepare your
screen for installation.
Installation Kit
Instructions on reverse
1
2
3
4
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
WARNING: This product is made of glass and should be handled with care if broken.
bodyguardz.com
Any remaining bubbles should disappear within
24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to pull out
any trapped dust. Carefully lift up the corner of
the glass closest to the dust particle and place the
sticky side of the strip against the piece of dust.
Then, pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the glass
o your device.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may carry
additional fees and conditions.

BodyGuardz Pure 2 Edge With Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
WARNING: This product is made of glass and should be handled with care if broken.
bodyguardz.com
1
2
3
4
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit
Instructions on reverse
1. Plastic Backer
A plastic cover over the adhesive side of the
protector.
2. Glass Protector
The thin, ultra-strong glass that safeguards
your device screen.
3. Installation Guide
A plastic guide that precisely aligns the
glass protector to your device.
4. Cleaning Kit
An alcohol wipe, a microber cleaning cloth,
and dust removal stickers to prepare your
screen for installation.
Installation Instructions
Place the install guide on top of your
device. Check orientation of phone and
protector.
21
43
While holding the protector, peel o the
plastic backer to expose the adhesive.
Next, use the install guide to align the
protector on the device.
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently tap
the dust removal sticker over the surface of
the screen to remove any dust particles.
Once aligned, run your nger rmly down the
middle of the screen to begin adhesion. Then,
remove install guide by lifting from the bottom.
Push remaining bubbles to the edges with your
nger and cleaning cloth.
Install Video: bodyguardz.com/install
Any remaining bubbles should disappear within
24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to pull out
any trapped dust. Carefully lift up the corner of
the glass closest to the dust particle and place the
sticky side of the strip against the piece of dust.
Then, pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the glass
o your device.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may carry
additional fees and conditions.

BodyGuardz Pure 2 Edge Without Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
WARNING: This product is made of glass and should be handled with care if broken.
bodyguardz.com
1. Plastic Backer
A plastic cover over the adhesive side
of the protector.
2. Glass Protector
The thin, ultra-strong glass that safeguards
your device screen.
3. Cleaning Kit
An alcohol wipe, a microber cleaning cloth,
and dust removal stickers to prepare your
screen for installation.
Installation Kit
Instructions on reverse
1
2
3
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Instructions
While holding the protector, peel o the
plastic backer to expose the adhesive.
21
43
Align the protector over your device,
using the speaker hole as a guide, and
gently lay it down from top to bottom.
When placed, run your nger rmly down
the middle of the screen and then
side-to-side to adhere.
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently tap
the dust removal sticker over the surface of
the screen to remove any dust particles.
Use the included microber cleaning cloth to
push out any bubbles.
Install Video: bodyguardz.com/install
Any remaining bubbles should disappear within
24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to pull out
any trapped dust. Carefully lift up the corner of
the glass closest to the dust particle and place the
sticky side of the strip against the piece of dust.
Then, pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the glass
o your device.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may carry
additional fees and conditions.

BodyGuardz Pure 2 With Install Guide - Tablets
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
WARNING: This product is made of glass and should be handled with care if broken.
bodyguardz.com
1. Adhesive Release Liner
A clear lm covering the adhesive
side of the protector.
2. Glass Protector
The thin, ultra-strong glass that
safeguards your device screen.
3. Cap Sheet
A clear lm to shield the glass and
help with install alignment.
4. Installation Guide
A plastic guide that precisely aligns the
glass protector to your device.
5. Cleaning Kit
An alcohol wipe, a microber cleaning
cloth, and dust removal stickers to
prepare your screen for installation.
5
1
2
3
4
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit
Instructions on reverse
Installation Instructions
Place installation guide around the
device, pressing down for a snug t
around the tablet.
21
43
While holding the protector, peel o
the release liner to expose the adhesive.
Then, use the installation guide, camera,
and sensors to align the protector
on the device.
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently tap
the dust removal sticker over the surface of
the screen to remove any dust particles.
Once aligned, run your nger rmly down the
middle of the screen to begin adhesion. Then,
peel o the cap sheet. Finally, remove the
installation guide by lifting from the bottom.
Install Video: bodyguardz.com/install
Any remaining bubbles should disappear within
24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to pull out
any trapped dust. Carefully lift up the corner of
the glass closest to the dust particle and place the
sticky side of the strip against the piece of dust.
Then, pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the glass
o your device.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may carry
additional fees and conditions.

BodyGuardz Pure 2 - Express Align
INSTALLATION INSTRUCTIONS
1
2
3
4
any remaining
bubbles will disappear
within 24-48 hrs
Tray will come o and
protector will adhere to phone
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
bodyguardz.com
Installation Kit Instructions on reverse
1. Adhesive Release Liner
A clear lm covering the adhesive
side of the protector.
2. Glass Protector
The thin, ultra-strong glass that will protect
your device.
3. Cap Sheet
A clear lm to shield the glass and help with
install alignment.
4. Express Align Tray
A plastic tray to precisely align the protector
to your device.
Installation Instructions
Through the opening in the tray, rmly
press and hold the glass protector down
with your nger, while pulling the tray
o with your other hand.
21
3
Use the included cleaning cloth to
push out any bubbles, then peel o the
cap sheet.
While holding the tray, peel o the release
liner to expose the adhesive, then place the
tray on top of your device. Check orientation
of phone & protector.
Any remaining bubbles should disappear within
24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to pull out
any trapped dust. Carefully lift up the corner of
the glass closest to the dust particle and place the
sticky side of the strip against the piece of dust.
Then, pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the glass
o your device.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may carry
additional fees and conditions.
Install Video: bodyguardz.com/install

BodyGuardz SpyGlass Edge with Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
WARNING: This product is made of glass and should be handled with care if broken.
bodyguardz.com
1
2
3
4
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit
Instructions on reverse
1. Plastic Backer
A plastic cover over the adhesive side of the
protector.
2. Glass Protector
The thin, ultra-strong glass that safeguards
your device screen.
3. Installation Guide
A plastic guide that precisely aligns the
glass protector to your device.
4. Cleaning Kit
An alcohol wipe, a microber cleaning cloth,
and dust removal stickers to prepare your
screen for installation.
Installation Instructions
Place the install guide on top of your
device. Check orientation of phone and
protector.
21
43
While holding the protector, peel o the
plastic backer to expose the adhesive.
Next, use the install guide to align the
protector on the device.
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently tap
the dust removal sticker over the surface of
the screen to remove any dust particles.
Once aligned, run your nger rmly down the
middle of the screen to begin adhesion. Then,
remove install guide by lifting from the bottom.
Push remaining bubbles to the edges with your
nger and cleaning cloth.
Install Video: bodyguardz.com/install
Any remaining bubbles should disappear within
24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to pull out
any trapped dust. Carefully lift up the corner of
the glass closest to the dust particle and place the
sticky side of the strip against the piece of dust.
Then, pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the glass
o your device.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may carry
additional fees and conditions.

BodyGuardz EyeGuard Edge with Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
WARNING: This product is made of glass and should be handled with care if broken.
bodyguardz.com
1
2
3
4
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit
Instructions on reverse
1. Plastic Backer
A plastic cover over the adhesive side of the
protector.
2. Glass Protector
The thin, ultra-strong glass that safeguards
your device screen.
3. Installation Guide
A plastic guide that precisely aligns the
glass protector to your device.
4. Cleaning Kit
An alcohol wipe, a microber cleaning cloth,
and dust removal stickers to prepare your
screen for installation.
Installation Instructions
Place the install guide on top of your
device. Check orientation of phone and
protector.
21
43
While holding the protector, peel o the
plastic backer to expose the adhesive.
Next, use the install guide to align the
protector on the device.
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently tap
the dust removal sticker over the surface of
the screen to remove any dust particles.
Once aligned, run your nger rmly down the
middle of the screen to begin adhesion. Then,
remove install guide by lifting from the bottom.
Push remaining bubbles to the edges with your
nger and cleaning cloth.
Install Video: bodyguardz.com/install
Any remaining bubbles should disappear within
24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to pull out
any trapped dust. Carefully lift up the corner of
the glass closest to the dust particle and place the
sticky side of the strip against the piece of dust.
Then, pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the glass
o your device.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may carry
additional fees and conditions.

BodyGuardz PRTX with Install Guide - Bottom Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of proof of purchase, it will
be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days. BodyGuardz policy
states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be asked to provide proof of purchase. Shipping
and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation, physical abuse, misuse or
neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded. This limited warranty is in lieu of all other
warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any implied warranty of merchantability or tness for a particular use.
In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential, indirect, special, or punitive damages of any kind resulting from the use of this product.
In no event shall BodyGuardz be liable for damage in excess of the purchase price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
bodyguardz.com
1. Adhesive Release Liner
A clear lm covering the adhesive side of the protector.
2. Screen Protector
The shatterproof, synthetic glass that will protect your device.
3. Cap Sheet
A clear lm to shield the glass and help with install alignment.
4. Alignment Tool
A plastic guide inserted into the charging port of the device to
help align the protector.
5. Squeegee
A squeegee to apply even pressure to the protector.
6. Cleaning Kit
An alcohol wipe, a microber cleaning cloth, and dust removal
stickers to prepare your screen for installation.
6
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit
Instructions on reverse
12
3
4
5
Install Video:
bodyguardz.com/install
Instructions
Lift the protector and peel o the adhesive
release liner. Place the protector back on
the device and press down. Use the
speaker to ensure the cap sheet and
protector are positioned correctly.
21
43
Slowly move the squeegee from the bottom
to the top of the device. Use medium
pressure. Run the squeegee along the
edges to push out any remaining bubbles.
Peel the backing from the alignment tool
and insert into the charging port of the device.
Align the holes on the alignment sheet with
the notches on the alignment tool, then
place the protector on the device.
Remove the alignment tool, and peel o the
alignment sheet. If bubbles persist, use the
squeegee to chase and release them at the
edges of the protector.
IMPORTANT:
Rescan your ngerprint AFTER
installing screen protector.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners
may carry additional fees and conditions.
Any remaining bubbles should
disappear within 24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers
to pull out any trapped dust. Carefully
lift up the corner of the protector
closest to the dust particle and place
the sticky side of the strip against the
piece of dust. Then, pull dust sticker
straight out.
To remove protector:
Carefully lift one corner and slowly
pull the protector o your device.

BodyGuardz PRTX with Install Guide - Regular Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
bodyguardz.com
Installation Kit Instructions on reverse
1. Adhesive Release Liner
A clear lm covering the adhesive
side of the protector.
2. Screen Protector
The shatterproof, synthetic glass
that will protect your device.
3. Cap Sheet
A clear lm to shield the glass and
help with install alignment.
4. Installation Guide
A plastic tray to precisely align
the protector to your device.
5. Squeegee
A plastic squeegee to apply rm,
even pressure to the protector.
6. Cleaning Kit
An alcohol wipe, a microber cleaning
cloth, and dust removal stickers to
prepare your screen for installation.
1
2
3
4
5
6
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Instructions
21
43
Install Video: bodyguardz.com/install
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently
tap the dust removal sticker over the surface
of the screen to remove any dust particles.
Then, rmly place the installation guide on
top of the device.
While holding the protector, peel o the release
liner to expose the adhesive. Use the installation
guide to align and place the protector on the
device, starting at the bottom.
Once aligned and placed, slowly push air
bubbles out by running the plastic squeegee
from the bottom to the top of the device.
Use rm, even pressure. Repeat as needed.
Remove the cap sheet.
Remove the installation guide. Adhere the
protector to your device by running the
squeegee along the edges to push out any
remaining bubbles.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may
carry additional fees and conditions.
Any remaining bubbles should disappear
within 24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to
pull out any trapped dust. Carefully lift up
the corner of the protector closest to the
dust particle and place the sticky side of
the strip against the piece of dust. Then,
pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the
protector o your device.

BodyGuardz PRTX with Install Guide - Top and Bottom Pegs
INSTALLATION INSTRUCTIONS
Installation Kit Instructions on reverse
1. Adhesive Release Liner
A clear lm covering the adhesive
side of the protector.
2. Screen Protector
The shatterproof, synthetic glass
that will protect your device.
3. Cap Sheet
A clear lm to shield the glass and
help with install alignment.
4. Installation Guide
A plastic tray to precisely align
the protector to your device.
5. Squeegee
A plastic squeegee to apply rm,
even pressure to the protector.
6. Cleaning Kit
An alcohol wipe, a microber cleaning
cloth, and dust removal stickers to
prepare your screen for installation.
1
2
3
4
5
6
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Instructions
21
43
Install Video: bodyguardz.com/install
Use the provided alcohol wipe to clean your
screen thoroughly. Wipe away any streaks
with the microber cleaning cloth. Gently
tap the dust removal sticker over the surface
of the screen to remove any dust particles.
Then, rmly place the device inside the
installation guide with the top of the device
at the “top” end of the installation guide.
While holding the protector, peel o the release
liner to expose the adhesive. Align the protector
over the device, with the adhesive side down, by
placing the holes in the cap sheet over the pegs
at the top of the guide rst and then over the
pegs at the bottom.
Once aligned and placed, adhere the
protector to your device by slowly running
the plastic squeegee from the top to the
bottom. Use rm, even pressure. Repeat as
needed. Pull the cap sheet o the protector.
Remove the device from the installation guide.
Run the squeegee along the edges to push out
any remaining bubbles.
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
bodyguardz.com
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may
carry additional fees and conditions.
Any remaining bubbles should disappear
within 24-48 hrs.
Dust removal after installation:
Use the provided dust removal stickers to
pull out any trapped dust. Carefully lift up
the corner of the protector closest to the
dust particle and place the sticky side of
the strip against the piece of dust. Then,
pull dust sticker straight out.
To remove protector:
Carefully lift one corner and slowly pull the
protector o your device.

BodyGuardz PRTX - Apple Watch with Install Guide
INSTALLATION INSTRUCTIONS
Dust removal: It is critical there are no
dust particles on your device.
Air bubble removal: It may be easier using
your thumbnail to push air bubbles toward
the edges. Take your time, using medium
to heavy pressure. If bubbles persist, use
the squeegee to push and release them at
the edges of the screen protector.
To remove protector: Carefully lift one
corner and slowly pull the protector o
your watch.
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
bodyguardz.com
1. Adhesive Release Liner
A clear lm covering the adhesive
side of the protector.
2. Screen Protector
The shatterproof, synthetic glass
that will protect your device.
3. Cap Sheet
A clear lm to shield the glass and
help with install alignment.
4. Installation Guide
A plastic tray to precisely align
the protector to your device.
5. Squeegee
A plastic squeegee to apply hard,
even pressure to the protector.
6. Cleaning Kit
An alcohol wipe, a microber cleaning
cloth, and dust removal stickers to
prepare your screen for installation.
2
1
3
4
5
6
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit Instructions on reverse Instructions
While holding the protector, peel o the release
liner to expose the adhesive. Use the installation
guide to align and place the protector on the
watch, starting at the bottom.
21
43
Once aligned and placed, slowly push air
bubbles out by running the plastic
squeegee across the screen. Repeat as
needed. Remove the cap sheet.
Use the provided alcohol wipe to clean
your screen thoroughly. Wipe away any
streaks with the microber cleaning cloth.
Gently tap the dust removal sticker over
the surface of the screen to remove any
dust particles. Then, rmly place the
installation guide on top of the watch.
Remove the installation guide. If bubbles
persist, use the squeegee to chase and
release them at the edges of the protector.
Install Video:
bodyguardz.com/install
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may
carry additional fees and conditions.

BodyGuardz PRTX - Apple Watch without Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
bodyguardz.com
1. Adhesive Release Liner
A clear lm covering the adhesive
side of the protector.
2. Screen Protector
The shatterproof, synthetic glass
that will protect your device.
3. Cap Sheet
A clear lm to shield the glass and
help with install alignment.
4. Squeegee
A plastic squeegee to apply hard,
even pressure to the protector.
5. Cleaning Kit
An alcohol wipe, a microber cleaning
cloth, and dust removal stickers to
prepare your screen for installation.
2
1
3
4
5
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit Instructions on reverse Instructions
Align the protector with your watch, and gently
press down.
21
43
Once aligned and placed, slowly push air
bubbles out by running the plastic
squeegee across the screen. Repeat as
needed.
Clean your watch’s screen thoroughly
before you begin. While holding the
protector, peel o the release liner to
expose the adhesive.
Remove the cap sheet. If bubbles persist, use
the squeegee to chase and release them at
the edges of the protector.
Install Video:
bodyguardz.com/install
Dust removal: It is critical there are no
dust particles on your device.
Air bubble removal: It may be easier using
your thumbnail to push air bubbles toward
the edges. Take your time, using medium
to heavy pressure. If bubbles persist, use
the squeegee to push and release them at
the edges of the screen protector.
To remove protector: Carefully lift one
corner and slowly pull the protector o
your watch.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may
carry additional fees and conditions.

BodyGuardz PRTX - FitBit Versa with Install Guide
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of
proof of purchase, it will be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days.
BodyGuardz policy states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be
asked to provide proof of purchase. Shipping and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation,
physical abuse, misuse or neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded.
This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any
implied warranty of merchantability or tness for a particular use. In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential,
indirect, special, or punitive damages of any kind resulting from the use of this product. In no event shall BodyGuardz be liable for damage in excess of the purchase
price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
bodyguardz.com
1. Adhesive Release Liner
A clear lm covering the adhesive
side of the protector.
2. Screen Protector
The shatterproof, synthetic glass
that will protect your device.
3. Installation Guide
A plastic tray to precisely align
the protector to your device.
4. Squeegee
A plastic squeegee to apply hard,
even pressure to the protector.
5. Cleaning Kit
An alcohol wipe, a microber cleaning
cloth, and dust removal stickers to
prepare your screen for installation.
2
1
3
4
5
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit Instructions on reverse Instructions
While holding the protector, peel o the release
liner to expose the adhesive. Use the installation
guide to align and place the protector on the
watch, starting at the bottom.
21
43
Once aligned and placed, slowly push air
bubbles out by running the plastic squeegee
across the screen. Repeat as needed.
Use the provided alcohol wipe to clean
your screen thoroughly. Wipe away any
streaks with the microber cleaning cloth.
Gently tap the dust removal sticker over
the surface of the screen to remove any
dust particles. Then, rmly place the
installation guide on top of the watch.
Remove the installation guide. If bubbles
persist, use the squeegee to chase and
release them at the edges of the protector.
Install Video:
bodyguardz.com/install
Dust removal: It is critical there are no
dust particles on your device.
Air bubble removal: It may be easier using
your thumbnail to push air bubbles toward
the edges. Take your time, using medium
to heavy pressure. If bubbles persist, use
the squeegee to push and release them at
the edges of the screen protector.
To remove protector: Carefully lift one
corner and slowly pull the protector o
your watch.
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners may
carry additional fees and conditions.

BodyGuardz UltraTough - Smartphones, Tablets, and Watches
INSTALLATION INSTRUCTIONS
Cap Sheet
Clear, rigid sheet covering the protective lm.
UltraTough Protector
Film that protects your device.
Back Liner
White sheet protecting adhesive side of lm.
a
b
c
a
b
c
UltraTough
Installation
Make your install easier.
Watch installation videos:
bodyguardz.com/install
for smartphones & tablets
NOTE: Illustrations do not necessarily represent your device.
Important: Follow the instructions carefully.
There are two methods to install your protector:
with or without the application gel.
The gel application
method allows you to
more easily position
your protector and
minimizes bubbles.
Although it requires
about 30 minutes to dry
before use, there will be
signicantly less haze
than the dry method
immediately after appli-
cation. We recommend
waiting overnight before
putting device in your
pocket. The protector
will take up to 72 hours
to completely cure.
The dry apply method
oers a quicker appli-
cation, though your
protector cannot be
repositioned once it is
applied. As the adhesive
cures, there will be a
visible haze immediately
following application
which should completely
cure within 96 hours.
Your device will be ready
for use immediately
after application, but
we recommend waiting
overnight before putting
it in your pocket.
Preparation
Gel Application Dry Application
Turn your device o, wash your hands, clean
your device with provided cleaning cloth, and
use the provided dust removal stickers to ensure
your device is free of dust and grime.
Gel Application Instructions
Remove the lm from the
white back liner. Using your
nger, spread application gel
over the entire sticky side of
the lm. Only a few drops of
gel are needed.
Set the protector on the
device, reposition by placing
your ngers on the lm and glid-
ing it into the correct position.
Using a credit card covered
with the provided cleaning
cloth, squeegee from the
middle to remove all bubbles
and excess gel.
Let sit for 30 minutes, then carefully remove the
cap sheet (a) by pulling on the tab. Any haziness
will disappear over time.
FOR FULL BODY: Repeat process for back protector.
Apply any side pieces by peeling them o the back
liner and placing them according to included diagram
(no gel is needed for side pieces).
1
2
3
4
Dry Application Instructions
FOR FULL BODY: Repeat process for back protector.
Apply any side pieces by peeling them o the
back liner and placing them according to included
diagram.
1
2
3
Carefully remove the cap sheet (a) by pulling on the
tab. Any haziness will disappear over time.
4
With the lm facing down, peel
the white back liner o 1-1.5
inches from the top and crease
the liner, exposing the adhesive
side of the lm. Be careful not
to touch the adhesive.
Using a credit card covered
with the provided cleaning
cloth, press down the
remaining portion of the
lm, letting the back liner
slip away. Rub the surface
with card or cleaning cloth
to smooth out any bubbles.
Position the lm over the
device using edges, buttons
and camera to judge the
alignment. When it is aligned,
press down on the exposed
adhesive portion.

BodyGuardz UltraTough - MacBooks
INSTALLATION INSTRUCTIONS
YOU NEED
A credit card, cleaning cloth, and application gel.
UltraTough Installation
for MacBook
QUESTIONS?
[email protected]om
@bodyguardz
Remove the lm from the white back
liner. Using your nger, spread
application gel over the entire
sticky side of the lm.
1
Put the lm on the MacBook.
Reposition lm by gliding it into the
correct position with your ngers.
2
Using a credit card covered with the
provided cleaning cloth, squeegee
from the middle to remove all
bubbles and excess gel.
3
Repeat the process for all pieces
of the protector.
4
Let sit for 30 minutes. Any haziness
will disappear over time.
30m
5
Install Video:
bodyguardz.com/install
PREPARATION
Wash your hands. Turn your
MacBook o and clean it with the
provided cleaning cloth.
APPLICATION GEL
The gel allows you to more easily po-
sition your protector and minimizes
bubbles. Although it requires about
30 minutes to dry before use, there
will be signicantly less haze. We
recommend waiting overnight before
putting your MacBook in a case or
bag. The gel will take up to 72 hours
to completely cure.
INSTALLATION TIPS
• Apply the wrist rest portions rst.
These are the easiest pieces to
install.
• When applying the top, use the apple
to align the protector. Make sure
your spacing on the apple is correct
so it will align properly.
• When applying the bottom, line up
the back screw holes and the protec-
tor will align properly.
6Learn more & register your product at
bodyguardz.com/advantage_program.
Replacements fullled by retail
partners may carry additional fees
and conditions. S + H may apply.

BodyGuardz UltraTough with Install Guide - Bottom Install
INSTALLATION INSTRUCTIONS
Replacement information: BodyGuardz warrants to the original purchaser that if this product proves defective in materials or workmanship for 1 year from the date of proof of purchase, it will
be subject to the terms of this warranty and may be replaced at BodyGuardz option.
Replacement limitations and exclusions: When ordering a replacement, you are acknowledging that you will return your original BodyGuardz product within 60 days. BodyGuardz policy
states that if the original protector is not returned in this time, customers will be charged full price for the replacement protector. You may also be asked to provide proof of purchase. Shipping
and handling fees apply. Returning damaged screen protector is required and return postage may apply.
Warranty information: This warranty does not apply to any product which has suered through normal wear and tear, accident, alteration, improper installation, physical abuse, misuse or
neglect. Damage resulting from an act of God, including but not limited to re, ood, earthquake and other natural disasters will be excluded. This limited warranty is in lieu of all other
warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any implied warranty of merchantability or tness for a particular use.
In no event, whether based in contract or tort shall BodyGuardz be liable for incidental, consequential, indirect, special, or punitive damages of any kind resulting from the use of this product.
In no event shall BodyGuardz be liable for damage in excess of the purchase price. BodyGuardz and the BodyGuardz logo are registered trademarks of NLU Products®, LLC dba BodyGuardz.
bodyguardz.com
1. Adhesive Release Liner
A clear lm covering the adhesive side of the protector.
2. Screen Protector
The shatterproof, synthetic glass that will protect your device.
3. Cap Sheet
A clear lm to shield the glass and help with install alignment.
4. Alignment Tool
A plastic guide inserted into the charging port of the device to
help align the protector.
5. Squeegee
A squeegee to apply even pressure to the protector.
6. Cleaning Kit
An alcohol wipe, a microber cleaning cloth, and dust removal
stickers to prepare your screen for installation.
6
70% Isopropyl Alcohol
Alcool Isopropilique 70%
Alcohol
wipe.
Préps d’alcool.
Dust Removal Sticker. Dust Removal Sticker.
Installation Kit
Instructions on reverse
12
3
4
5
Register now to get free
replacements for the life
of your device.
bodyguardz.com/register
This product qualies for
Replacements fullled by retail partners
may carry additional fees and conditions.
Install Video:
bodyguardz.com/install
Instructions
Align the holes on the cap sheet with the
notches on the alignment tool, and place the
protector on the device. Use the speaker to
ensure the cap sheet and protector are
positioned correctly.
21
43
Place the squeegee at the bottom of the
protector, then lift the top edge of the
protector to expose adhesive. Slowly run
the squeegee from the bottom to the top of
the device.* Use medium pressure.
Peel the backing from the alignment tool and
insert it in the charging port of the device.
Peel o the bottom strip of the back liner
near the alignment tab (A).
Press down on the edges with the provided
cleaning cloth, then peel o the cap sheet,
starting from the bottom. Remove the
alignment tool.
*The back liner will
automatically peel away
from the protector.
Dust removal: It is critical there are
no dust particles on your device.
Air bubble removal: It may be easier
using your thumbnail to push air
bubbles toward the edges. Take your
time, using medium to heavy pressure.
If bubbles persist, use the squeegee to
push and release them at the edges of
the screen protector.
To remove protector: Carefully lift
one corner and slowly pull the protec-
tor o your watch.

BodyGuardz ScreenGuardz HD
INSTALLATION INSTRUCTIONS
Application Instructions
Important: Follow instructions carefully. Conduct
application in as much of a lint-free environment as
possible.
We highly recommend you watch our
installation videos to make the process even easier.
youtube.com/bodyguardz
Back Liner
HD™ Anti-glare / Anti-ngerprint Screen Protector
Cap Sheet
clear sheet covering the top side of lm
rigid PET lm that protects your device
clear sheet protecting adhesive side of lm
*Illustrations provided on these instructions
do not necessarily represent your device
2
ScreenGuardz®
a
a
b
b
c
c
Carefully Remove the cap sheet after the protector has
been applied.
With the lm facing down, peel
the back liner down 1-1.5
inches from the top and crease
the liner, exposing the adhesive
side of the lm. Be careful not to
touch the adhesive.
Clean your screen thoroughly with provided cleaning
cloth. Make sure no dust or lint is left on the screen.
Position the lm on the device, aligning it properly (use edges,
buttons & camera to judge alignment). The fold will allow you to
oat the lm in the exact spot before pressing down the exposed
adhesive portion to your device.
When it is aligned, press
down the exposed adhesive
portion.
Wrap the provided squee-
gee card in the cleaning
cloth and use it to push out
any bubbles. Any remain-
ing bubbles will work
themselves out in time.
4
5
bodyguardz.com
b
a

BodyGuardz HD Impact
INSTALLATION INSTRUCTIONS
With the lm facing down, peel the
back liner down 1.5 inches from the
top and crease the liner, exposing
the adhesive side of the lm. Be
careful not to touch the adhesive.
Position the lm on the device using
edges, buttons & camera to judge
alignment. The fold will allow you to
oat the lm into place. When it is
aligned, press down the exposed
adhesive portion to your device.
1.
IMPORTANT: Clean your device screen and wash your hands before
installation. Watch our installation videos @ youtube.com/bodyguardz
2.
Starting at the top of the screen
where the adhesive is adhered, slide
the provided squeegee card across the
rest of the protector, while simultane-
ously removing the back liner.
3.
Use the squeegee and cleaning cloth
to push out any bubbles. Carefully
remove the cap sheet after the
protector has been applied.
Any remaining bubbles will disappear within 24-48 hours.
4.
INSTALLATION INSTRUCTIONS
ScreenGuardz HD®™

BodyGuardz Armor Carbon Fiber
INSTALLATION INSTRUCTIONS
Armor™
1
2
3
Application Instructions
Lay your device
screen-down on a at
surface. Carefully remove
the armor skin from the
white back-liner.
Holding the skin at it’s
edges, align it with your
device using the edges,
buttons, and camera.
Once aligned, press the
adhesive side of the skin to
your device. Press down any
corners or edgesthatare
sticking up & smooth out
any bubbles with your
ngers.
If there are any side pieces included, see enclosed diagram
for placement. Be careful not to stretch the material.
Thanks to air-release technology, installation is very easy.
Air-release adhesive makes it easy to push out any air
bubbles after installation; and if it isn’t aligned perfectly,
just carefully remove it and try again!