Bogen SPT30A User manual

The Bogen SPT30A and SP308A are compact, high
intelligibility, reentrant type loudspeakers, designed for
one-way or two-way sound and communication sys-
tems. Their sturdy, weatherproof, all-metal construc-
tion is ideal for indoor and outdoor use in industrial
plants, warehouses, schools, construction sites, trans-
portation terminals, and recreational areas.
The Model SPT30A has a built-in, variable impedance
selector switch for matching the speaker power
requirements to a 25V or 70V constant-voltage line.
The model SP308A has an 8-ohm impedance only.
• High intelligibility and efficiency; ideal for both
one-way and talk back applications
• Weatherproof, all-metal construction
• 30 watts; 25/70 volt or 8-ohm operation
• Tap settings for 70V: 30, 15, 7.5, 3.7, 1.8 watts;
for 25V: 15, 7.5, 3.7, 1.8 watts
• Rotary tap impedance selector on SPT30A
• Tilt and swivel base for easy positioning
• Screw terminals make installation fast and easy
• All-purpose mounting bracket
• Self-aligning, field replaceable diaphragm
• Textured mocha enamel finish
• Limited lifetime warranty
• Mountable to I-beam flange using Bogen’s BC1
Beam Clamp (sold separately)
• Mountable to electrical box using Bogen’s HSES10
mounting strap (sold separately)
• Terminal Cover (TCSPT1) allows connection of
conduit fittings to horn speakers (sold separately)
Features
Description
Specifications subject to change without notice.
© 1995 Bogen Communications, Inc.
54-7759-04D 0904
Reentrant Horn
Loudspeakers
Models SPT30A
and SP308A

Power Rating (RMS): 30 watts continuous, 40 watts equalized
Frequency Response: 225 Hz to 14 kHz
Impedance:
SPT30A — 25/70 volts
SP308A — 8 ohms
Sound Pressure Level: 125 dB @ four feet on axis with 30-watt
input @ 1000 Hz
Dispersion: 100º
Sensitivity as Microphone: -22 dBm [Ref: 10 dynes/cm2]
Dimensions: 11" Diameter x 10-1/2" D
Product Weight:
SPT30A — 6 lb.
SP308A — 5 lb.
Finish: Textured mocha enamel
Impedance Selector Switch Settings (SPT30A only): 25V @ 15, 7.5, 3.7, 1.8 watts
70V @ 30, 15, 7.5, 3.7, 1.8 watts
Sound Pressure Level in dB @ 1000Hz: Watts Feet on Axis
Input: 4 8 163264
30 125 119113107 101
15122 116110104 98
7.5 119113107 10195
3.7 116110104 98 92
1.8 113107 10195 89
Technical
Specifications
The loudspeaker shall be a Bogen Model ____ (spec-
ify SPT30A or SP308A), or approved equivalent,
reentrant type horn loudspeaker. The frequency
response shall be 225 Hz to 14 kHz. Rated power
output shall be 30 watts, RMS continuous.
Dispersion shall be 100º. Sound pressure level, mea-
sured four feet on axis with 30 watt input @
1000 Hz, shall be at least 125 dB.
Use for SPT30A. The unit shall incorporate a
seven-position weather-sealed switch, to allow
matching the loudspeaker to a 25V or 70V constant-
voltage line. Power handling capacity shall be
adjustable at 70V to 1.8, 3.7, 7.5, 15, or 30 watts, and
at 25V to 1.8, 3.7, 7.5, or 15 watts.
Use for SP308A. The unit shall have an impedance
of 8 ohms.
The loudspeaker shall be of weatherproof, all-metal
construction, with driver enclosed within a weather-
proof housing. The loudspeaker shall include a self-
aligning, field-replaceable diaphragm.
Screw terminals shall be provided for connection to
the audio line. A plastic cover shall be provided to
protect the connectors and impedance selector
switch, and provide strain relief for the audio line.
An all-purpose mounting bracket shall provide pre-
cise positioning in the vertical and horizontal planes
with a single adjustment. The bracket shall include
banding slots to permit mounting the loudspeaker on
beams or pillars. Bracket and loudspeaker shall be fin-
ished in textured mocha enamel.The unit shall mea-
sure 11" in diameter by 10-1/2" D. Product weight
shall be ________ (insert 6 lb. for the SPT30A, 5 lb.
for the SP308A).
Architect
and Engineer
Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel. [phone]; FAX: [phone]; www.bogen.com