Bogen CSD1X2 User manual

CEILING TILE
SUPPORT RAIL CROSSBAR (included)
CEILING GRID
CSD1X2
Drop-In Ceiling Speaker
CSD1X2 & Variations with Back Can
Bogen’s CSD1X2 Drop-In Ceiling Speakers are 1' X 2'
speakers that allow for fast and easy installation.
Just make one simple cut to the ceiling tile, lay the
support rail crossbar (included) across the ceiling
grid, and drop the speaker into place.
•Finely perforated grille over the entire front of speaker
•Fully enclosed, industrial grade steel construction
•Enclosed Back Can
•8'' main cone with secondary high-frequency cone
•70V/25V, 4-watt transformer (4, 2, 1, 0.5, 0.25 watt) taps;
selected by rotary switch
•Seismic attachment point
•Available in off-white and bright white (“U” versions)
grille finish
•''VR'' versions have a Recessed Volume Control
(front-mounted)
•Complies with Requirements of UL-2043
•Support Rail Crossbar (included)

Frequency Response . . . . . . . . . . .110 Hz - 20 kHz
SPL @ 1W / 1m . . . . . . . . . . . . . . . . . 94 dB
Power Taps . . . . . . . . . . . . . . . . . . . . 4, 2, 1, 0.5, 0.25 W
Dispersion @ 2 kHz (6 dB down) . . .100°
Cone Material & Surround . . . . . . . . Treated paper
Cones . . . . . . . . . . . . . . . . . . . . . . . .
8" main cone with secondary
high frequency cone
Magnet Weight . . . . . . . . . . . . . . . . .10 oz.
Connection . . . . . . . . . . . . . . . . . . . . Via wire nuts (included in electrical box)
Dimensions . . . . . . . . . . . . . . . . . . . .12-7/8" W x 4-3/4" H x 23-3/4" D
Product Weight . . . . . . . . . . . . . . . . .10 lb.
70V and 25V Compatible.
Plenum-Rated, complies with Requirements of Standard UL-2043.
The speaker shall be a Bogen Model CSD1X2. It shall be a 1 ft. x 2 ft. steel assembly with non-reflective, finished metal grille; damped high-
compliance factory-mounted 8" loudspeaker with a treated paper cone; and 70V/25V transformer. The 8" main speaker cone shall have a
10 ounce magnet. A secondary high frequency cone speaker shall be included in the assembly. The back of the assembly shall have a back
can enclosure. Output shall be 94 dB @ 1W/1m (min.). Frequency response shall be 110 Hz - 20 kHz (min.). Transformer shall have power
taps of 4, 2, 1, 0.5, and 0.25 watts, selectable by stripped and tinned leads. A support rail crossbar shall be included. The speaker shall
measure 12-7/8" W x 4-3/4" H x 23-3/4" D. The speaker shall weigh 10 lb.
For CSD1X2: Front grille shall be off-white in color.
For CSD1X2U: Front grille finish shall be bright white in color.
For CSD1X2VR: Front grille finish shall be off-white in color. An easily accessible, front-mounted recessed volume control shall be included.
For CSD1X2VRU: Front grille finish shall be bright white in color. An easily accessible, front-mounted recessed volume control shall be included.
SPECIFICATIONS
Architect and Engineer Specifications
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: [phone] • Fax: [phone] www.bogen.com
Specifications subject to change without notice.
© 2007 Bogen Communications, Inc.
Part No. 54-9261-01E 0805
SPEAKER ENCLOSURE
ELECTRICAL BOX
ELECTRICAL BOX COVER
SEISMIC ATTACHMENT POINT
FINELY PERFORATED
METAL FINISH GRILLE
ROTARY TAP
SELECTOR
SWITCH
FRONT-MOUNTED
VOLUME CONTROL
(''VR'' VERSION)
SUPPORT RAIL
CROSSBAR
WIRE NUTS FOR
CONNECTIONS
Drop-In Ceiling Speaker CSD1X2 & Variations
(with Back Can)
CSD1X2
CSD1X2U
CSD1X2VR
CSD1X2VRU
Model
Off-white Finish Bright White Finish (U) Back Can Recessed Volume Control (VR)
●
●
●
●
●
●
●
●
●
●
Lead Color
70V Red
25V Yellow
COM Black