BOLDR FARA User manual

1
BOLDR. FARA USER MANUALBOLDR. shopboldr.com
FARA
FARA
USER MANUAL

2
BOLDR. FARA USER MANUAL
Welcome to your FARA heater instruction manual. In the manual
you will find the useful information pertaining to technical
specifications, usage instructions, safety and warranty information.
WHAT’S IN THE BOX
• 1x FARA Heater
• 1x Temperature sensor*
• 1x CR123 Battery for Sensor*
• 1x QR Code - Instructions
*(if smart add-on version selected)
PRODUCT DESCRIPTION:
FARA is a compact electric heater with ceramic heating elements
and a fan that combine to create an even and pleasant heat. Use
as stand alone or with the BOLDR app to unlock a host of smart
home and energy saving features.
PRODUCT DIAGRAM:
PRODUCT SPECIFICATION:
BOLDR FARA Ceramic Heater
Weight: 680g
Dimensions: 13 x 12 x 20 cm
Advised Heater Area: up to 215 sqft (20 m2)*
Rated Input: 800W/1200W
Rate Frequency: 50hz
WiFi Operational Range: up to 50m outdoors/30m indoors.*
PRODUCT INSTRUCTIONS:
1. Open the FARA packaging and remove and reserve the QR
Code that leads to the Set Up Instructions.
2. Unbox the Sensor, Sensory Battery & the Heater.
3. Place the heater on a smooth and hard surface to ensure the
product is stable.
4. Before plugging the heater in, ensure that the power switch on
the back is set to a neutral 0 position.
5. Setting the heater to the Iposition will output 800W while
setting the heater to the II switch position will output 1200W
6. If you are setting up the FARA heater with the BOLDR app,
please follow the instructions outline below.
Note: If the BOLDR app cannot find the heater, please reset the it:
- Unplug the heater from the socket
- Plug it back it
- Flip the heater on it’s side and press the red reset button on/off
quickly 5 times or until you hear a quick double-click sound
- Once you hear the sound wait 5 seconds and press retry
SMART HOME SET UP:
If you are using the FARA Smart Home heater, please ensure
that you first download the BOLDR app on your iOS or Android
device. The app can be found in the QR code below along side
video set up instructions.
TIPS:
• Always pair the sensor to a room before pairing the heater.
• Keep the heater unplugged while pairing the sensor.
• Wi-fi Requirments: Works with standard 2.4Ghz Bandwidth!*
*You will need a standard 2.4 ghz Wi-Fi bandwth . If your router
has band steering, we advise that you uncouple the 2.4 ghz and
5.0 ghz networks. This can easily be done by logging into your
Wi-Fi router’s IP address!
For additional support please refer to the
BOLDR HELP CENTER:
www.boldr.zendesk.com
INTENDED USE
Before using the product, the user should determine the suitability of
the product for its intended use. The product is intended for use as a
heating device for residential use as outlined in this document.
Use outside of this scope is NOT covered by the warranty.
*Based on 2.4 m. (7.9 ft) ceiling height and A+ insulation class.

3
BOLDR. FARA USER MANUAL
FARA heaters are intended for use with a specific voltage which
is region based. The required voltage is based on the delivery
address.
If the heater is used in a different region than the delivery address
there are risks of overheating and damage.
Region specific voltages:
USA: 110V/120V
Canada: 110V/120V
UK: 240V
Ireland: 230V
Europe: 230V
Australia: 230V/240V
New Zealand: 230V/240V
South Africa: 230V
Switzerland: 230V
Japan: 100V
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and / or serious injury. Save all of the warnings and
instructions for future reference.
SHELLY THERMOSTAT
PLEASE NOTE THAT THE SHELLY THERMOSTAT
ONLY WORKS WITH THE BOLDR APP
To enable the Shelly Thermostat follow the in-app instructions.
Battery Type: 3V DC - CR123A
Battery Life: Up to 18 months
Electrical consumption: Static ≤70uA/Awake ≤250mA
Humidity measurement range: 0~100% (±5%)
Temperature measurement range: -40°C ÷ 60 °C (± 1°C)
Working temperature: -40°C ÷ 60 °C
Dimensions (HxWxL): 35x45x45 mm
Radio protocol: WiFi 802.11 b/g/n
Frequency: 2400 – 2500 MHz;
Operational range: 30m indoors
• CAUTION! Use the device only with batteries which comply
with all applicable regulations. Inappropriate batteries may
cause a short circuit in the device, which may damage it.
• CAUTION! Do not allow children to play with the device,
especially with the Power Button. Keep the devices for remote
control of FARA (mobile phones, tablets, PCs) away from
children.
• Device Wake Up: To open the device, twist the top and
bottom part of the case counter clockwise. Press the Button.
The LED should flash slowly. This means that BOLDR Sense is in
AP mode. Press the Button again and the LED will turn off and
BOLDR Sense will be in sleep mode.
LED States:
• LED flashing quickly - AP Mode
• LED flashing slowly - STA Mode (No Cloud)
• LED still - STA Mode (Connected to Cloud)
• LED flashing quickly - FW Update (STA mode
connected Cloud)
Factory Reset: You can return your Shelly Thermostat to its Factory
Settings by pressing and holding the button for 10 seconds. Upon
successful factory reset the LED will flash slowly.
Wi-fi Requirments: Works with standard 2.4Ghz Bandwidth!*
*You will need a standard 2.4 ghz Wi-Fi bandwth . If your router
has band steering, we advise that you uncouple the 2.4 ghz and
5.0 ghz networks. This can easily be done by logging into your
Wi-Fi router’s IP address!
CAUTION
When using the heater, leave a gap of a minimum of 50 cm. (20
inches) from the front of the grill to the nearest object or person.
Do not touch the cover grill while the heater is operational or
immediately after it has been used.
• CAUTION! At no point should the product be disassembled.
Opening the product enclosure will violate the warranty and
may lead to malfunction and danger to life.
• DO NOT operate the heater if the cord or plug is damaged
or after the heater malfunctions, or if it has been dropped or
damaged in any manner. Check each heater for damage
before installation. Make sure that the heater itself, the plug
and the cable are free of any visible signs of damage. If the
cord is damaged the appliance must be sent for repair to the
manufacturer (Baldr Group Ltd).
INTENDED USE
• This heater must only be used for the heating of people or
buildings. The heater is not to be used by children or persons
with reduced physical, sensory or mental capabilities, or lack
of experience or knowledge. Children should be kept away
and should not be left unsupervised around the unit.

4
BOLDR. FARA USER MANUAL
• DO NOT COVER THE HEATER.
• DO NOT BLOCK AIR SUPPLY TO THE HEATER FROM THE
BACK OR THE FRONT FOR THE RISK OF OVERHEATING.
• DO NOT USE IN BATHROOMS OR WET
ENVIRONMENTS IN ORDER TO AVOID DAMAGE AND
INJURY.
• DO NOT PLACE ANY FOREIGN OBJECT INSIDE OF THE
HEATER OR ON THE GRILL OF THE HEATER.
• Children should use the heater under the supervision of adult.
• Do not use in environments that contain flammable gasses or
explosive materials.
CLEANING & MAINTENANCE:
The heater should regularly be cleaned to prevent dust build up
which can lead to unpleasant smells.
• Before cleaning the heater, the heater should be fully
unplugged.
• Use a microcloth to remove dust and surface dirt. Only spot
clean with a damp cloth.
• Never submerge the heater or use alcohol based products on
the heater.
• Ensure heater is fully dry before using it again, if spot cleaning
with a damp cloth.
• When the heater is not being used for a prolonged period,
please store it in a dust free and dry place.
• If the heater has not been used for a prolonged period of
time, users may experience a temporary unpleasant smell
resulting from dust build up.
MAINTENANCE & REPAIR
DO NOT attempt to repair or adjust any electrical or mechanical
functions of this product. Doing so will void your warranty. Repairs
must only be carried out by an authorised BOLDR service partner
or the manufacturer (Baldr Group Ltd).
WARRANTY
Within the warranty period, repair or replacement due to defects
in material and workmanship is completely free of charge; the costs
are covered by the manufacturer on presentation of your invoice
or delivery slip. A prerequisite for validity of the warranty is use of
the device as intended with observance of the specified conditions
of use. Any further warranty or claims are excluded. The warranty
covers the repair or replacement of the defective product only. Any
further claims or liability for consequential loss are excluded
WARRANTY RESTRICTION
The warranty will be void if the heater has been tampered with or
opened in any way. Baldr Group Ltd will assume no responsibility
for scratches on surface or frames after first use. Baldr Group Ltd
cannot accept responsibility for damage, loss or injury caused by
ingress of water or moisture, accidental damage, mishandling,
external impact, adjustment by unauthorised personnel or failure to
follow the correct maintenance and safety precautions as stated in
the manual. If a fault or defect covered by the warranty occurs, the
heating panel has to be sent to an authorised service partner or the
manufacturer together with the invoice or original delivery note. If
sending by carrier the product should be properly packaged and
proof of purchase must be stated.
DISPOSAL
• The devices should not be disposed of with other household
waste at the end of it’s working life. Household users should
contact either the retailer where they purchased this product
for proper disposal or recycle them through the local return
system. For further information contact your municipal waste
management.
PRODUCT CERTIFICATION
• CE EUROPEAN SAFETY STANDARD: EN 603351:
2012+A15: 2021; EN 60335230: 2009+A12: 2020
• EMC DIRECTIVE: 2014/30/EU
• UL: 1278: 2014
LEGAL
Seller: Baldr Group Ltd
Trading Name: BOLDR
Address: 71-75 Shelton Street Covent Garden, LondoN
E-mail: [e-mail]
Website: https://shopboldr.com
Changes in the contact data are published by the seller (Baldr
Group Ltd) at the official website of the device: https://shopboldr.
com
The user is obliged to stay informed for any amendments of these
warranty terms before exercising his/her rights against the seller
(Baldr Group Ltd).

5
BOLDR. FARA USER MANUAL
SYMBOLS
This symbol indicates hazard which, if not avoided, can result in
serious injury or death.
This symbol indicates dangers due to electrical voltage which, if not
avoided, can result in seriosu injury or death.
This symbol, indicates hot surface of the device, which can cause
burns if touched.