Bomberg BB-01 User manual
WARRANTY & WATCH CARE
WARRANTY & WATCH CARE
2
CONTENT
WARRANTY & USER INSTRUCTIONS
International warranty Page 3-4
Special recommendation Page 5-7
Instructions Model - BB-01 - 3 Hands Pages 9-11
Instructions Model - BB-01 - 3 Hands Automatic Pages 13-15
3
INTERNATIONAL WARRANTY
Limited 2 years warranty:
Your Bomberg watch is warranted for a 2 years period under the terms and
conditions of this warranty.
The international Bomberg warranty covers material and manufacturing
defects existing at the time of the delivery of the purchased Bomberg
watch. The warranty only comes into force if the warranty certicate is dated,
fully and correctly completed and stamped by an ofcial Bomberg retailer.
During the warranty period and by presenting the valid warranty certicate,
you will have the right to have any defect repaired free of charge.
This manufacturer’s warranty does not cover:
- The life of the battery;
- Normal wear and tear and aging (scratched crystal, alteration of the
colour and/or material of nonmetallic straps and chains, such as leather,
textile, rubber; peeling of the plating);
4
- Any damage on any part of the watch resulting from abnormal / abusive
use, lack of care, negligence accidents (knocks, dents, crushing, broken
crystal, etc.), incorrect use of the watch and non-observance of the use
directions provided by Bomberg;
- The Bomberg watch handled by non-authorized persons (for battery
replacement, services or repairs) or which has been altered in this
original conditions beyond Bomberg.
5
SPECIAL RECOMMENDATIONS
How often should my watch be checked?
We recommend a yearly water resistancy check (partial service with
movement check).
How often should my watch be serviced?
Like any other precision instrument a watch should be serviced regularly
to ensure perfect runwaring. We cannot say how often you should have
your watch serviced as this depends on the model, the climate where you
live and how you look after the watch yourself. As a rule, a watch should be
serviced every 4 or 5 years, depending on the conditions in which it is worn.
Where should I go to get my watch serviced or for a new battery?
We recommend that you go to an ofcial Bomberg agent or retailer. They
are the only people who have the necessary tools and devices to work on
your watch and to carry out the necessary checks at specialized level.
Furthermore, only specialists can guarantee that their work meets the
stringent quality standards set by Bomberg.
6
What can I do to ensure that my watch functions perfectly for many years?
Magnetic elds: avoid putting your watch on a loud-speaker or a refrige-
rator because these machines create magnetic elds that may damage it.
Salt-Water: always rinse your watch in fresh water after swimming in the sea.
Shocks: avoid subjecting your watch to shocks, including sudden changes
in temperatures.
Cleaning: use a toothbrush and soapy water to clean bracelet and water
resistancy cases and a soft cloth to dry off afterwards. For the leather
strap, it’s necessary to use special cleaning products.
Chemical products: avoid all direct contact with solvents detergents,
perfume, cosmetics, etc. which may damage the bracelet or strap, the
case or the gaskets.
Temperatures: avoid exposing your watch to extreme temperatures (over
60°C or 140°F and under 0°C or 32°F) and to sudden uctuations in tem-
perature.
7
Water-resistance: All Bomberg watches are water-resistant. BB-01 3 hands
quartz models can withstand a water pressure of at least 3 bar (depth of 30
metres). BB-01 3 hands automatic models can withstand 5 bar (depth of 50
metres). Water-resistance is not a permanent condition. Please note that the
water-resistance is only guaranteed if the crown is in the normal or winding
position. To ensure permanent water resistance, the watch should be
checked once a year. To ensure conformance with the warranty regulations,
these operations must be performed by an authorized Bomberg dealer or
authorized Bomberg Service Center.
BB-01 - 3 HANDS
10
BB-01 - 3 Hands
Normal crown position
Setting position
Minute hand
Second hand
Hour hand
11
BOMBERG MODEL - BB-01 - 3 Hands
Setting the time:
1. Pull the crown out to the setting position so that the second hand stops.
2. Turn the crown to set the hour and minute hands.
3. After the time has been set, push the crown back to the normal position
and small second hand begins to run again.
BB-01 - 3 HANDS AUTOMATIC
14
S
W
I
S
S
M
A
D
E
BB-01 - 3 Hands Automatic
Winding crown
position
Minute hand
Second hand
Hour hand
1st click position
2nd click position
Date
15
BOMBERG MODEL - BB-01 - 3 Hands Automatic
Manual winding:
1. Turn the crown clockwise to wind the watch.
Setting the date:
1. Pull the crown out to the intermediate 1st click position.
2. Turn the crown clockwise to set the date.*
3. After the date has been set, push the crown back to the winding position.
Setting the time:
1. Pull the crown out to the 2nd click position so that the second hand stops.
2. Turn the crown to set the hour and minute hands.
3. After the time has been set, push the crown back to the winding position
(the second hand begins to run again).
*Important: It is not possible to adjust the date between 8.00 pm and 3.00 am.
It is necessary to adjust the date after each month with less than 31 days.
16
BB-01 - 3 Hands Automatic
Pull the button to release the spring
bar and remove the strap.
How to change the strap
17
How to change the buckle
Use a needle to press the hole in the
spring bar and remove the buckle.
Table of contents
Other Bomberg Watch manuals
