Bonrich CJ8082T User manual

Instruction Manual
-CJ8082T CLOCK
Package Contents
1.CJ8082T Clock
2.USB POWER CORD
3.Instruction Manual

Power on and set up
Plugging in for power
• Connect the power cord to a convenient wall outlet.
Battery power
• Remove the battery compartment cover.
• Insert 2 x AAA alkaline batteries into the battery compartment. Follow the polarity (+/-) diagram in the battery compartment.
• Replace the battery cover.
Time & Date
Press (MODE)button to enter the following mode.
TIME SET MODE- DATE SET MODE- ALARM SET MODE -TIME MODE
•TIME SET:
During Time Set mode, press MODE button for more than 3 seconds, it will enter the function in the following sequence.
Hour - Minute - Exit
Press 12/24 or C/F button to adjust the blinking number, and press MODE button to enter next.
TIME MODE:12/24HOUR Long press 12/24 button for 3 sec to switch 12/24 Hour display.
•DATE SET
Press MODE button to enter Date Set Mode. During the Date Set Mode, Press MODE button for more than 3 seconds, it will
enter the function in the following sequence.
Year - Month - Date - Exit
Press 12/24 or C/F button to adjust the blinking number, and press MODE button to enter next.
•Week Display
While the date is set, week day will be displayed automatically.

•ALARM SET
Press MODE button to enter Alarm Set Mode. During the Alarm Set Mode, Press MODE button for more than 3 seconds,
it will enter the function in the following sequence.
Hour - Minute - Exit
Press 12/24 or C/F button to adjust the blinking number, and press MODE button to enter next.
•Alarm ON/OFF and Snooze
Short Press the 12/24 button to turn on/off the alarm. While the alarm is on, the alarm indicate will appear on the screen.
While the alarm is off, the alarm indicate will disappear.
When the alarm time is reached, the clock will ring out for 1 minute. Press the SNZ KEY, the alarm will be on again when
the snooze period (8 minutes) is over.
Backlight function
• While the clock is powered by battery, press the LIGHT button at the back of the clock, the backlight can light for 8
seconds.
• While the clock is power by the power code,the backlight can continuously light.
Temperature and humidity display
While the power is on, temperature and humidity will display automatically. The temperature and humidity will be
updated automatically every 20 seconds.
Temperature: Range 14.2 ℉- 140℉(-10℃- 61℃)
Humidity: Range 20% - 99%
Short press C/F button to switch C/F display.
Short press MAX/MIN button to show the Max and Min humidity and temperature during the past 24 hours.

Living weather display
Temperature
under 59F
Humidity ≤40%
Temperature
under 59F
Humidity 41~65%
Temperature
under 59F
Humidity 66~71%
Temperature
under 59F
Humidity ≥72%
Temperature
under 59F~77F
Humidity ≤55%
Temperature
under 59F~77F
Humidity 56~70%
Temperature
under 59F~77F
Humidity 71~79%
Temperature
under 59F~77F
Humidity ≥80%
Temperature
under 77F
Humidity ≤60%
Temperature
under 77F
Humidity 61~75%
Temperature
under 77F
Humidity 76~86%
Temperature
under 77F
Humidity ≥87%
Care & Maintenance
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture.
Important Placement Guidelines
•To ensure accurate temperature measurement, place units out of direct sunlight and away from heat sources or vents.
•Please replace the battery when the display is blurred. If the battery is not used for a long time, please remove the battery.The
battery leak will cause damage to the product.