Oregon Scientific RM328P User manual

1
GB
RADIO CONTROLLED
PROJECTION CLOCK
WITH DIGITAL THERMOMETER
MODEL : RM328P / RM328PU
Instruction Manual
INTRODUCTION
Congratulations on your purchase of the RF Projection Clock with
Temperature Display RM328P (RM328PU) .
The RM328P is a multifunction (RF) controlled clock. It can
automatically synchronize its current time and date when brought
within an approximate 1500 km radius of the radio signal DCF77
generated from Frankfurt, Germany (the UK version from MSF
Rugby, England).
To facilitate nighttime reading, the unit comes with a projector that
can cast large, clear clock-time figures onto flat surfaces in dark. It
also has a back light for easy reading of the display.
OtherfeaturesoftheRM328Pinclude:displayingthecurrentindoor
temperature,acurrentdatedisplay,dailycrescendoalarmwitheight-
minute snooze function, and extra-large display.
DESCRIPTION OF PARTS

2
GB
A Two-line LCD
Displays the time, date, alarm status and temperature
B [ ] Battery-Low icon
Lights up when batteries are running dry
C[ ] Radio-Reception Signal
Indicates the condition of radio reception
D[ ] Alarm-on icon
Appears when the alarm is activated
E[ ] Alarm icon
Appears when the alarm time is displayed
F CLOCK button
Toggles the calendar clock display modes or activates the
calendar clock setting mode
G UP [ ] and DOWN [ ] buttons
Increases or decreases the value of a setting
H ALARM button
Displays the alarm time or sets the alarm status
I MEMORY button
Displays the maximum or minimum temperature or erases the
temperature memory
J[ ] button
Activates the snooze function when an alarm activates or turn
on the back light for five seconds
K Projection Lens
Lens from which image light emits
L Adjustable Projector
For projecting the current time on the wall or ceiling
M[ ] IMAGE ROTATION knob
90° (left or right) image rotation
N FOCUS Knob
Adjusts the focus of the projection
O 180° ROTATION button
Horizontal flip rotation of image
P PROJECTION LIGHT ON - switch
Used with the power adapter to enable extended use of the
projector
Q Battery compartment
Accommodates two UM-3 or “AA” size batteries
R RESET button
Resets the unit by returning all settings to their default values
BATTERY INSTALLATION
The unit uses two (2) UM-3 or “AA” size 1.5V batteries.
To insert batteries:
1. Press the door tab and click open the door.
2. Insert the batteries strictly according to the polarities shown
therein.
3. Replace the battery compartment door.

3
GB
Note:Undernormalcircumstances,thebatteriesaregoodfor
1 year. However, the battery life can be reduced vastly by
frequent use of the back light, projector or snooze function.
If not disposed of properly batteries can be harmful.
Protect the environment by taking exhausted batteries
to authorized disposal stations.
HOW TO USE THE PROJECTOR
The projector projects the current time onto a wall or ceiling.
To project the time onto a flat surface:
In a darkened room, press [ ], the wall
projection will activate for approximately 5-seconds.
This unit has several features to enhance the clarity of the projected
image.
Projector Features
Feature Effect Instructions
Adjustable Rotates 180° to cast Adjust by turning forwards
Projector image onto any wall or backwards, the projector
so that the projection lens
is pointed in the appropriate
direction
FOCUS Focuses image Rotate knob forwards or
Knob backwards until the image
clarity is optimized
[ ] Rotates image on a Turns an image to maintain
IMAGE given surface to an upright position
ROTATION maintain an upright
knob position
180° Horizontally flips Flips an image to maintain
ROTATION an image on a given an upright position
button surface to maintain
an upright position
HOW TO USE THE PROJECTOR
POWER ADAPTER
Your unit comes with a power adapter so you can use the projector
for extended periods of time.

4
GB
- Unit has received radio signal.
- Clock is searching for radio signal but not yet
received. It is recommended that you reposition or
rotate the antenna.
- The display time has been manually set and is not
synchronized to the RF signal.
- Radio reception is disabled and no signal reception
will be initiated until it is enabled again.
- When the antenna symbol blinks, a reception is going
on. A full reception takes approx. 2 to 10 minutes,
depending on the quality of the signal received.
The hourly scanning may take a few seconds only.
No indicator
To install the adapter:
1. Insert adapter into jack on the bottom of the unit.
2. Plug the adapter into the adapter socket.
Note:Making surethevoltageis correct,plugtheother end of
the power adapter into a free wall socket.
Once the power adapter is in place, you can select to turn on the
projectorforlonger periodsoftime, suchas throughout thenight, by
sliding out the PROJECTION LIGHT ON - switch on the back of
the unit. To turn off the projector, slide the switch back.
Note that this switch can only be used with the power
adapter installed. For momentary projection, use the
[ ].
HOW TO USE THE BACKLIGHT
Press [ ] once. The back light will activate
for five seconds.
ABOUT RADIO RECEPTION
The RM328P is a radio frequency (RF) controlled clock. When
locatedwithina1500kmradiusofradiosignal(DCF77)atFrankfurt,
Germany,theclocktimewillautomaticallysynchronizewithDCF77
time-signaltransmission.ThebenefitofaRFcontrolledclockisthat
highly-accurate time is maintained and manual adjustments to the
time and date are not be required.
(UK version within a 1500km radius of radio signal (MSF) from
Rugby, England)
When the batteries are first installed, the RM328P (RM328PU) will
automatically search for a radio signal.
When in search mode, the antenna icon [ ] will blink. This
process takes between two (2) and ten (10) minutes. After initial
search,shortperiodic reception-signal scanswillcommence several
times a day.
The antenna icon indicates the quality of reception.

5
GB
When the reception is complete, the radio-reception signal will stop
blinking.
Interference
Receptioncanbeaffectedbyanumberoffactors.Forbestreception,
place the device away from metal objects and electrical appliances.
Note: Interferencefrom sources suchas TV sets can affectthe
signal. If, after batteries have been inserted for ten minutes,
the signal is not received, then set the time manually (see
section: How To Set The Calendar Clock Manually).
“SECONDS” AND DAY-OF-THE-WEEK
DISPLAY
The“seconds”andtheday-of-the-weeksharethesamesectionofthe
display.
day-of-the-week display
“second” display
Theday-of-the-weekisdisplayedasanabbreviationinfivelanguages.
Day-of-the-week
Language Monday Tuesday Wed. Thursday Friday Saturday Sunday
English
German
French
Italian
Spanish
Tochangethe“seconds”displaytotheday-of-the-weekdisplay:
• When the “seconds” are displayed, press CLOCK once.
Tochangetheday-of-the-weekdisplaytothe“seconds”display:
• When the day-of-the-week is displayed, press CLOCK once.
CALENDAR AND ALARM TIME DISPLAY
The calendar and the alarm-time share the same section of the
display.
The calendar is displayed in a day-month format.

6
GB
calendar mode
alarm mode
To change the calendar display to the alarm-time display:
• When the calendar is displayed, press ALARM once.
To change the alarm-time display to the calendar display:
• When the alarm time is displayed, press CLOCK once.
HOW TO SET THE CALENDAR
CLOCK MANUALLY
IftheRM328P(RM328PU)istakenoutsideoftherangeofFrankfurt
DCF77 radio signal it will need to be manually set (the UK version
from MSF Rugby, England).
To manually set the clock:
1. Whenthe calendar isdisplayed, press CLOCK for two seconds.
The month value will start to blink.
2. Enter the month using the [ ] and [ ] buttons. Hold down
either button to rapidly increase or decrease the value.
3. Press CLOCK to confirm and proceed to set the day, display
language, day-of-the-week, hour and minute.
4. Forthedisplaylanguage,youcanchoosebetween(E)forEnglish
(D)for German (F) for French, (I) forItalian and (S) for Spanish
(see language chart above).
5. When finished, press CLOCK to return to normal display. If
changes are made during the process, the seconds will reset and
start from zero.
HOW TO SET AND ACTIVATE
THE ALARM
To set the alarm time:
1. Press and hold ALARMfor two seconds when the alarm time is
displayed.
2. Enterthevalueforthehourdigits.PressALARMtoconfirmand
go to the minute digits. Enter the value and press ALARM to
confirm.
3. The alarm is automatically activated. To deactivate it, press
ALARM once.
ALARM AND SNOOZE FUNCTION
When the alarm is set, it will activate at the set time. The back light
will go on for five seconds with the alarm-on icon [ ] flashing.
The crescendo function allows the alarm to start gently and step up
its intensity in three steps. Without interruption, the alarm will
activate for a minute.

7
GB
To stop the alarm, press any key. If the [ ]
button is pressed, the snooze function will be triggered. The alarm
will stop for eight minutes before activating again.
INDOOR TEMPERATURE
The temperature is shown in Centigrade (°C). The RM328P
(RM328PU) is capable of measuring temperatures within the -5°C
and 50°C range. If the temperature goes above or below that, the
display will show “HHH” or “LLL”.
MAXIMUM AND MINIMUM
TEMPERATURES
The maximum and minimum recorded temperatures will be
automaticallystoredinmemory.Todisplaythem,pressMEMORY
torotatethroughthemaximum,minimumandcurrent temperatures.
The respective MAX or MIN indicator will be displayed.
maximum temperature minimum temperature
To clear the memory, hold down MEMORY for two seconds. The
maximum and minimum temperatures will be erased. If you press
MEMORY now, the maximum and minimum temperatures will
have the same values as the current ones until different readings are
recorded.
HOW TO RESET THE UNIT
The RESET button allows you to return all settings to its factory
values, which are, 1-1 (1st of January) for date, 12:00 for time and
06:00forthealarm,whichwillbedeactivated(UKversion,12:00pm
for time and 06:00am for the alarm).
The button is required only when the unit is not operating in a
favorable way, such as in the rare case of a malfunction.
PRECAUTIONS
Thisunitisengineeredtogiveyouyearsofsatisfactoryserviceifyou
handle it carefully. Here are a few precautions.
1. Do not immerse the unit in water. If you spill liquid over it, dry
it immediately with a soft, lint-free cloth.
2. Do not clean the unit with abrasive or corrosive materials. They
may scratch the plastic parts and corrode the electronic circuit.
3. Donotsubjecttheunittoexcessiveforce,shock,dust,temperature
orhumidity, which may result in malfunction, shorter electronic
life span, damaged battery and distorted parts.
4. Donottamperwiththeunit’sinternalcomponents. Doingsowill
invalidate the warranty on the unit and may cause unnecessary
damage. The unit contains no user-serviceable parts.
5. Onlyusefreshbatteriesasspecifiedintheuser’sinstructions. Do
not mix new and old batteries as the old ones may leak.
6. Always read the user’s instructions thoroughly before operating
the unit.

8
GB
SPECIFICATIONS
Operating Temperature : 5° C to 50° C
Clock Functions
Radio Control : Auto synchronize current time and
date by Radio signal generated from
Germany DCF77
(the UK version from MSF Rugby,
England)
Calendar : Day of week in English / German /
French / Italian / Spanish
Current date / month format
Clock Time : 24-hour format
(12-hour format for UK version)
Alarm Duration : 1 minute crescendo
Snooze : 8 minutes
Accuracy : +/-0.5 second/day
(when RF is disabled)
Temperature Measurement
Indoor Measurement : -5°C to 50°C
Temperature Resolution : 0.1°C
TemperatureAccuracy : -5°C to 0°C +/- 2.0°C
0°C to 40°C +/- 1.0°C
40°C to 50°C +/- 2.0°C
General Specification
Battery Type : Two(2)UM-3or“AA”size
Alkaline 1.5V battery
Unit Dimension : 116 x 150 x 42 mm (H x W x D)
Unit Weight : 240g (without battery)
CAUTION
— The content of this manual is subject to change without
further notice.
— Due to printing limitation, the displays shown in this
manual may differ from the actual display.
— Themanufacturer and itssuppliers held noresponsibility
to you or any other person for any damage expenses, lost
profits or any other claim arises by using this product.
— The contents of this manual may not be reproduced
without the permission of the manufacturer.