BonsenKitchen CM8903 User manual

OperationInstructions
Model: CM8903
Coffee Maker
www.bonsenkitchen.com

Contents
IMPORTANT SAFEGUARDS
PACKAGE CONTENTS
KNOW YOUR COFFEE MAKER
TECHNICAL DETAILS
BEFORE USING COFFEE MAKER
USING THE MACHINE FOR THE FIRST TIME
FUNCTION DECLARATION
CLEANING AND MAINTENANCE
CLEANING MINERAL DEPOSITS
WARRANTY CLAIM PROCEDURE
ENVIRONMENT FRIENDLY DISPOL
1-2
2
2
3
3
3
3-6
7
7-9
9
9
.......................................................................................
...........................................................
............................................................................
..................................................................................
...............................................................................
................................................................................................
.........................................................................................
..........................................................................
..................................................................................................
..............................................................................
.............................................................................

1
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed to reduce the risk of fire, electrical shock, and/or injury to
persons including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electric shock, do not place cord, plugs, or appliance
in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near
children.
5. Unplug from outlet when not in use and before cleaning.Allow to cool
before putting on or taking off parts, and before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return
appliance to an authorized service facility for examination, repair or
adjustment.
7. The use of an accessory not evaluated for use with this appliance may
cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Do not use appliance for other than intended use.
12. Appliances with Glass Containers.
A. The container is designed for use with this appliance. It must never be
used on a range top.
B. Do not set a hot container on a wet cold surface.
C. Do not use a cracked container or a container having a loose or
weakened handle.
D. Do not clean container with cleansers, steel wool pads, or other
abrasive material.

2
PACKAGE CONTENTS
1 Coffee maker
1 Glass Carafe
1 Measuring spoon
1 Reusable Fliter
1 Operating Instructions
Check the delivery contents for completeness immediately after unpacking.
Remove all packaging materials and plastic film from the appliance.
13. SAVE THESE INSTRUCTIONS.
14. HOUSEHOLD USE ONLY.
KNOW YOUR COFFEE MAKER
1. Carafe
2. Button
3. Display
4. Filter
5. Spout
6. Funnel cover
7. Water tank
8. Water gauge
9. Power cord
10. Base enclosure
1
10
2
9
4
7
3
8
5
6

3
TECHNICAL DETAILS
120V~ 50-60Hz 1000W
BEFORE USING COFFEE MAKER
Please study these operating instructions before using the coffee maker. By
following them carefully, and by paying special attention to the safety instructions
you will ensure that this coffee maker will go on making perfect coffee for years to
come.
FUNCTION DECLARATION
USING THE MACHINE FOR THE FIRST TIME
A. Plug in the power, LCD display "12:00AM" and flashes 5 times (1 Hz each time) after a
beep, the clock starts running, the machine enters the standby state. When the back-
light is on, if there is no operation within 15 seconds, the LCD backlight will be
automatically turned off. To operate again, press any button to activate the backlight
first.
B. Silent operation mode. In the standby state, press and hold the “Carafe Temp” button
for 3s, the mute indicator is on; To cancel silent mode, press and hold the “Carafe
Temp” button for 3s, and the mute indicator is off. When the mute indicator is displayed,
there is no sound when operate.
1. Before making coffee you should use the coffee maker once with water only
(without coffee or filter).
2. Insert the plug into the socket.
3. Using the carafe to fill water into the water tank.
4. Place the carafe in original position.
5. Start the brewing process by pressing the “Brew” switch.
1. INITIAL POWER ON DISPLAY

4
C.Factory resets. In standby mode, press Hr+Min button for 2S at the same time,
the buzzer will sound three times, then the factory settings will be restored
(clock, holding time, appointment time, insulation position, factory reset).
2.THE CLOCK SETTINGS
A.In standby mode, press “Hr” or press “Min” once, the clock will flash and enter
the clock setting.
B.In the clock setting, press the “Hr” button once and the hour will increase one;
if you press and hold the “Hr” button for 1s, the hour will increase rapidly, and
the hour will increase by 2 hours in every 0.2s until the display shows 11:00AM.
Then the clock go to 12:00 PM and then restart again. (12-hour system: AM
and PM will switch when the time changes from 11 to 12 o'clock)
C.In the clock setting, press the “Min” button once and the minute will increase
1 minute; if you press and hold the “Min” button for 1 second, the minute will
increase rapidly, and the minute will increase by 2 minutes in every 0.2s until
the display shows 0:59. Then go back to 0:00 and then restart.
A.In the standby mode, press the “Auto Off” button once, the display shows “AUTO
OFF” and the clock flashing at “0:30” (the default power-on time is 0:30,and the
default keep warm time is 30 minutes), and then enter the keep warm time
setting mode.
B.In the keep warm time setting (warm time and AUTO OFF will flash), press “Hr”
one time, the hour will increase 1 hour; if you press and hold “Hr” for 1 second,
the hour will increase rapidly. The 0 to 4 hours will be repeated when pressing
the “Hr”. Press the “MINUTE” button once, the minute displays 30 or 0, and the
maximum keep warm time is no more than 4 hours.
C.In the keep warm time setting (warm time and AUTO OFF will flash), press “Brew”
or no any operation in 5s (flash 5 times) to select the keep warm time, the
buzzer Beep, then machine exits to standby state.
3.KEEP WARM TIME SETTING

5
4.APPOINTMENT TIME SETTING AND APPOINTMENT OPENING
A. In the standby state, press the “PROGRAM” button once, the display shows “PROGRAM”
and flashing “AM12:00” (the default time is 12:00AM), and then enter the appointment
time setting.
B. In the appointment time setting (the appointment time and PROGRAM will flash), press
the “Hr” button once and the hour will increase 1 hour; if the “Hr” button is pressed for
1 second, the hour will increase rapidly and increase 2 hours in every 0.2s until 11:00
AM, then go to 12:00 PM and restart again. (12-hour system: AM and PM will switch
when the time changes from 11 to 12 o'clock)
C. In the appointment time setting, press the “Min” button once and the minute will
increase 1 minute; if you press and hold the “Min” button for 1 second, the minute will
increase rapidly, and the minute will increase by 2 minutes every 0.2s until the display
shows 0:59. Then go back to 0:00 and then restart.
D. In the appointment time setting, press “Brew” or no any operation in 5S (flash 5 times) ,
buzzer Beep, then the machine will enter the appointment state directly.
E. In the appointment time setting, when the clock matches to the appointment time, it
will start to brew the coffee and the keep warm function will be activated.
F. In the appointment time setting, press AUTO OFF to enter the keep warm time setting;
press “Carafe Temp” to select the warm level; press “Brew” to cancel the appointment;
press “BOLD” to enter “BOLD” mode; Press the “PROGRAM” button will display the
appointment time, then press the “PROGRAM” button again or no any operation in the
10S, the machine will enter the appointment state.
5.KEEP WARM LEVEL SETTING
A. The default power-on keep warm level is Medium, that means, when you replugged,
and the keep warm level will be reset to Medium. In any mode, press the “Carafe Temp”
button to display the warm level first, then press again to select the different keep warm
level, and it will repeat between Low--Medium–High. Each time you press it, the Low/
Medium/High LCD light will on for 1s. If there is no operation for the "Carafe Temp"
button in 10s, the Low/Medium/High LCD light will turn off.
B. Low level temperature: 172.4±5.4°F, Medium level temperature: 177.8±5.4°F, High
level temperature: 183.2±5.4°F.

6
6.BREW COFFEE AND KEEP WARM MODE
A. In any state, press the “Brew” button to brew coffee, the “Brew” LED lights up, the
warm level will be displayed, the coffee starts to brew.
B. After the water in the water tank is boiling, then machine will enter the keep
warm mode, display will shows the keep warm time and AUTO OFF, and the
machine will keep warm according to the preset warm level (if the keep warm
time is 0, it will exit to the standby state).
C. When the countdown is over, the machine will be in the standby state.
D. In the brew coffee and keep warm mode, the Hr/Min/Prog button is invalid.
Short press AUTO OFF to enter the keep warm time setting.
7.BOLD FUNCTION
A. In standby, appointment status and brew coffee mode, press “BOLD” button, BOLD LCD
light stay on, press “Brew” button to enter brew coffee mode, “Brew” LED light stay on,
brew coffee for 20s and stop for 10s, display shows warm level.
B. In the brew coffee mode, press the “BOLD” button, BOLD LCD light stay on. Brew coffee
for 20s and stop for 10s, display shows the warm level.
C. In the “BOLD” mode, press the “BOLD” button to exit the “BOLD” function; press the
“Brew” button to return to the standby state.
D. After the water in the water tank is boiling, the machine will enter the keep warm mode.
The BOLD LCD light turn off.
 8.CLEAN FUNCTION
A. In the standby mode, press and hold the “BOLD” button for 3 seconds, the display
CLEAN light stays on, then press the “Brew” button, “Brew” and CLEAN light on, then
enter the Clean mode.
B. When Clean light stay on, press the “BOLD” button to exit to standby and the BOLD light
stay on. When the Clean light stay on, press the “BOLD” button for 3 seconds to exit to
the standby state.
C. In the clean mode, the machine will keep boiling for 1 minute, then stop for 2 minutes.
And keep repeat and repeat again until the water in the water tank is boiling, then the
buzzer Beep, machine exits to the standby state.
NOTE:
After brews for 60 times, the “Clean” LED light on (remind to clean the
coffee machine). Once the Clean function is completed, the “Clean” LED
light off.

7
CLEANING MINERAL DEPOSITS
CLEAN AND MAINTENANCE
Disconnect the appliance.
Never immerse the appliance in water.
Clean the appliance with a damp cloth only.
The carafe can be cleaned with warm water, some washing-up liquid and a soft
brush. Do not clean the carafe in a dishwasher.
Serving should be performed by an authorized service facility.
To make sure that your coffee maker goes on producing perfect coffee you will
need, from time to time, to descale it. Frequency will depend on how hard the
water is in your area, and how often you use the coffee maker. If you use your
coffee maker once or twice a day, it is recommended that the maker be cleaned
every 6-8 weeks.
If the time it takes to brew a can of coffee suddenly is increased it is recommend-
ed that the coffee maker is descaled. The harder the water is in your area, the
more often the coffee maker needs to be descaled. The hardness of the water can
be advised at your local waterworks.
ENVIRONMENTAL TIP
An electronic appliance should, when it is no longer capable of functioning be
disposed with least possible environmental damage. The appliance should be
disposed according to the local regulations in your municipality, in most cases you
can discharge the appliance at your local recycling center.
Grounds and coffee filter can be disposed via a compost container.

8
CAUTION:
·The electrical voltage must correspond with the voltage stated on
the label on the bottom of the appliance.
·Use only cold water!
·Ensure the carafe is placed properly in its position when brewing
coffee.
·Between brewing processes switch off the appliance and let it cool
down for about 5 minutes. Then refill with cold water.
·After the brewing process, always switch off the appliance.
·Disconnect the appliance before cleaning.
·This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
·Keep the appliance and its cord out of reach of children less than 8
years old.
·Cleaning and user maintenance shall no be made by children without
supervision.
·To turn off the device, press the “Brew” button.
·If the supply cord is damaged, it must be replaced by the manufactur-
er, its service agent or similarly qualified persons in order to avoid a
hazard.
·Misuse may cause injury.
·Heating element surface is subjected to residual heat after use.
·The coffee-maker shall not be placed in a cabinet when in use.

9
·This appliance is not intended for use by persons (including children)
with reduced physical sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsi-
ble for their safety.
·Children shall not play with the appliance.
·The appliance must not be immersed.
·This appliance is intended to be used in household and similar
applications such as:
–Staff kitchen areas in shops, offices and other working environments
–Farm houses
–By clients in hotels, motels and other residential type environments
–Bed and breakfast type environments
WARRANTY CLAIM PROCEDURE
This product must not be disposed together with the domestic waste. This product has to
be disposed at an authorized place for recycling of electrical and electronic appliances. By
collecting and recycling waste, you help save natural resources, and make sure the product
is disposed in an environmental friendly and health way.
ENVIRONMENT FRIENDLY DISPOL
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (S/N: 12345) available as proof of purchase.
You will find the item number as a sticker on the rear or bottom of the appliance.If
malfunctions or other defects occur, please contact our customer service listed either by
telephone or by email.
If you request any further assistance, please contact us:
Customer service: 1-888-965-8032
[email protected]

10
Register your product at www.bonsenkitchen.com
to get more perks!
: 5805C Peachtree Corners East
Norcross, GA, 30092
: 1-888-965-8032
: [email protected]
Follow us @bonsenkitchen
Bonsen Electronics Inc.