Bosch WAE24167GB Specification sheet

en Instruction Manual and Installation Instructions
Washing machine

2
Your new washing machine
You have chosen a Bosch washing
machine.
Please take a few minutes to read and
become familiar with the advantages of
your washing machine.
To meet the high quality demands
required by Bosch, every washing
machine that leaves our factory is
carefully checked to ensure that it
functions correctly and is in perfect
condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.bosch-
home.com or contact our after-sales
service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
Read these operating and installation
instructions before switching on the
washing machine.
Display rules
:Warning!
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Note/tip
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■/ -
Lists are represented by a small box or
a dash.

en
3
Contents enInstruction Manual and Installation Instructions
8Intended use. . . . . . . . . . . . . . . . .4
(Safety instructions . . . . . . . . . . .5
Electrical safety. . . . . . . . . . . . . . . . . . 5
Risk of injury . . . . . . . . . . . . . . . . . . . . 5
Safety for children. . . . . . . . . . . . . . . . 6
7Environmental protection . . . . . .7
Packaging/used appliance . . . . . . . . . 7
Tips on economical use . . . . . . . . . . . 7
YMain points in brief . . . . . . . . . . .8
*Getting to know the appliance . 9
Washing machine . . . . . . . . . . . . . . . . 9
Control panel . . . . . . . . . . . . . . . . . . 10
ZLaundry. . . . . . . . . . . . . . . . . . . .10
Prepare the laundry . . . . . . . . . . . . . 10
Sorting laundry . . . . . . . . . . . . . . . . . 11
Starching . . . . . . . . . . . . . . . . . . . . . 11
Dyeing/bleaching . . . . . . . . . . . . . . . 11
Soaking . . . . . . . . . . . . . . . . . . . . . . 11
CDetergent . . . . . . . . . . . . . . . . . .12
Correct selection of detergent . . . . . 12
Saving energy and detergent . . . . . . 12
0Programme default settings . . .13
0Spin speed . . . . . . . . . . . . . . . . . 13
\Additional programme
settings . . . . . . . . . . . . . . . . . . . .13
GSpeedPerfect . . . . . . . . . . . . . . 13
FEcoPerfect . . . . . . . . . . . . . . . . . . 13
pEasy-Iron . . . . . . . . . . . . . . . . . . . 13
ZWater Plus . . . . . . . . . . . . . . . . . . 13
ORinse Plus . . . . . . . . . . . . . . . . . . 14
1Operating the appliance . . . . . .14
Preparing the washing machine . . . . 14
Select programme/switch on the
appliance . . . . . . . . . . . . . . . . . . . . . 14
Change the programme default
settings . . . . . . . . . . . . . . . . . . . . . . .14
Select additional programme
settings . . . . . . . . . . . . . . . . . . . . . . .14
Placing laundry into the drum . . . . . .15
Measure and add detergent
and care products . . . . . . . . . . . . . . .15
Start the programme . . . . . . . . . . . . .16
Adding laundry . . . . . . . . . . . . . . . . .16
Changing the programme . . . . . . . . .16
Cancel the programme . . . . . . . . . . .16
Programme end during
$Rinse Stop . . . . . . . . . . . . . . . . . .17
Programme end . . . . . . . . . . . . . . . .17
Removing laundry/switching off the
appliance. . . . . . . . . . . . . . . . . . . . . .17
HSensors . . . . . . . . . . . . . . . . . . . 17
Automatic load sensing. . . . . . . . . . .17
Unbalanced load detection system . .17
MSetting the signal . . . . . . . . . . . 18
2Cleaning and maintenance. . . . 19
Machine housing/control panel . . . . .19
Drum . . . . . . . . . . . . . . . . . . . . . . . . .19
Descaling . . . . . . . . . . . . . . . . . . . . .19
Detergent drawer and housing . . . . .19
Detergent solution pump blocked . . .20
The drain hose at the siphon
is blocked . . . . . . . . . . . . . . . . . . . . .21
Filter in the water supply blocked . . .21
3Faults and what to do
about them. . . . . . . . . . . . . . . . . 21
Emergency release . . . . . . . . . . . . . .21
Information about the indicator
lights . . . . . . . . . . . . . . . . . . . . . . . . .22
Faults and what to do about them. . .23

en Intended use
4
4After-sales service . . . . . . . . . . 24
JTechnical data . . . . . . . . . . . . . . 24
5Positioning and connecting. . . 25
Included with the appliance . . . . . . . 25
Installation . . . . . . . . . . . . . . . . . . . . 25
Secure installation . . . . . . . . . . . . . . 25
Installation surface. . . . . . . . . . . . . . 26
Installation on a base or
a wooden joist floor . . . . . . . . . . . . . 26
Installing the appliance in
a kitchenette . . . . . . . . . . . . . . . . . . 26
Removing the transport locks . . . . . 26
Hose and cable lengths. . . . . . . . . . 27
Water connection. . . . . . . . . . . . . . . 28
Water inlet . . . . . . . . . . . . . . . . . . . . 28
Water outlet . . . . . . . . . . . . . . . . . . . 29
Levelling . . . . . . . . . . . . . . . . . . . . . 30
Electrical connection . . . . . . . . . . . . 30
Before washing for the first time . . . 31
Transportation . . . . . . . . . . . . . . . . . 31
8Intended use
Intendeduse ■For private domestic use only.
■The washing machine is suitable for
washing machine-washable fabrics
and hand-washable wool in water
containing detergent.
■To be operated with cold mains
water and standard detergents and
care products which are suitable for
use in washing machines.
■When measuring out the amount of
all detergents, additives, care
products and cleaning agents,
always follow the manufacturer's
instructions.
■The washing machine may be used
by children over the age of 8 years
and by persons with reduced
physical, sensory or mental capacity
or by persons with a lack of
experience or knowledge if they are
supervised or have been instructed
by a responsible person.
Children must not carry out any
cleaning or maintenance work
without supervision.
■Keep children under the age of 3
years away from the washing
machine.
■This appliance is intended for use up
to a maximum height of
4000 metres above sea level.
■Keep pets away from the washing
machine.
Before operating the appliance: Read
the installation and operating
instructions and all other information
enclosed with the washing machine,
and use the machine accordingly.
Retain the documents for subsequent
use.

Safety instructions en
5
(Safety instructions
Safetyinstructions Electrical safety
:Warning
Risk of death!
There is a risk of electric shock
if live components are touched.
■Never touch or hold the
mains plug with wet hands.
■Only pull out the mains cable
by the plug and never by the
cable, as this could damage
it.
Risk of injury
:Warning
Risk of injury!
■The washing machine is very
heavy. Be careful when
lifting/transporting the
washing machine; wear
protective gloves.
■If the washing machine is
lifted by protruding
components (e.g. the
washing machine door), the
components may break off
and cause injuries.
Do not lift the washing
machine by protruding parts.
■If you climb onto the washing
machine, the worktop may
break and cause injuries.
Do not climb onto the
washing machine.
■If you lean/sit on the opened
washing machine door, the
washing machine may tip
over and cause injuries.
Do not lean on the washing
machine door when it is
open.
■Reaching into the drum while
it is still turning may cause
hand injuries.
Do not reach into the drum
when it is turning.
Wait until the drum has
stopped turning.
:Warning
Risk of scalding!
When washing at high
temperatures, there is a risk of
scalding if you come into
contact with hot detergent
solution (e.g. when draining hot
detergent solution into a
washbasin).
Do not reach into the hot
detergent solution.

en Safety instructions
6
Safety for children
:Warning
Risk of death!
There is a risk of death or injury
if children play with the washing
machine.
■Do not leave children
unattended near the washing
machine.
■Do not let children play with
the washing machine.
:Warning
Risk of death!
Children may lock themselves
in appliances, putting their lives
at risk.
For appliances that have
reached the end of their service
life:
■Unplug the mains plug.
■Cut through the mains cable
and remove it, along with the
plug.
■Destroy the lock on the
washing machine door.
:Warning
Risk of suffocation!
Children may become wrapped
in packaging/film or packing
parts if allowed to play with
them, or they may pull them
over their heads and suffocate.
Keep packaging, film and
packaging parts out of the
reach of children.
:Warning
Risk of poisoning!
Detergents and care products
may be poisonous if
consumed.
Keep detergents and care
products out of the reach of
children.
:Warning
Eye/skin irritation!
Detergents and care products
may cause irritation if they
come into contact with the eyes
or skin.
Keep detergents and care
products out of the reach of
children.
:Warning
Risk of injury!
When washing at high
temperatures, the glass in the
washing machine door
becomes hot.
Do not let children touch the
hot washing machine door.

Environmental protection en
7
7Environmental
protection
Environmentalprotection Packaging/used appliance
)
Dispose of packaging in an
environmentally friendly manner.
This appliance is designated according
to European Directive 2012/19/EC,
which governs waste electrical and
electronic equipment (WEEE).
The directive provides a framework for
the collection and recycling of old
appliances, which is valid across the
EU.
Tips on economical use
■Always fill the appliance with the
maximum amount of laundry for
each programme.
Programme overview ~
Supplementary sheet for the
installation and operating
instructions
■Wash normally soiled laundry
without prewash.
■Refer to the care labels on the
textiles for the selectable
temperature. The temperatures in the
machine may deviate from this for an
optimum mix of energy-saving and
washing results.
■If the laundry will be dried in a dryer,
select the spin speed according to
the dryer manufacturer's instructions.

en Main points in brief
8
YMain points in brief
Mainpointsinbrief
--------
--------
--------
--------
1@ @ @
Connect the mains
plug.
Turn on the tap (for
models without the
AquaStop feature).
Sort the laundry. Open the washing
machine door.
2@ @ @ @
Select a
programme.
Load the laundry. Do not trap any
items of laundry.
Close the washing
machine door.
3@ @ @ @
Add detergent. Change the
programme default
settings, if
necessary.
Select additional
settings, if
necessary.
Start the
programme.
4@ @ @ @
Programme end Open the loading
door and remove the
laundry.
Turn the programme
selector to Ú .
Turn off the tap
(for models without
AquaStop).

Getting to know the appliance en
9
*Getting to know the appliance
Gettingtoknowtheappliance Washing machine



#
6 7
(Detergent drawer ~Page 15
0Control panel
8Door with door handle
9S Open the loading door
9T Close the loading door
@Service flap

en Laundry
10
Control panel
You can find possible programme default settings and additional programme
settings in the overview; these differ depending on the model.
ZLaundry
Laundry Prepare the laundry
Caution!
Damage to the appliance/fabrics
Foreign objects (e.g. coins, paperclips,
needles, nails) may damage the laundry
or components in the washing machine.
You should therefore note the following
tips when preparing your laundry:
■Empty any pockets.
+
#
(additional programme settings
can be selected
Overview of all additional
programme settings ~Page 13
0Spin speed
for changing the programme
default setting
8Status indicators
Programme status indicators:
NWash
O Rinse
0 Spin
y Ready
@Start button for starting,
interrupting, (e.g. adding laundry)
and cancelling a programme
HProgramme selector for selecting
the programme and for switching
the washing machine on and off

Laundry en
11
■Look out for metal items (paperclips,
etc.) and remove them.
■Wash delicates in a laundry bag
(tights, underwired bras, etc.).
■Close any zips; button up any cover
buttons.
■Brush sand out of pockets and
collars.
■Remove curtain fittings or place
curtains in a laundry bag.
Sorting laundry
Sort your laundry according to the care
instructions and manufacturer's
information on the care labels,
depending on:
■Type of fabric/fibre.
■Colour:
Note: Laundry can discolour or not
be cleaned correctly. Wash white
and coloured items separately.
Wash new coloured items separately
the first time you wash them.
■Soiling:
Wash laundry with the same level of
soiling together.
Examples of levels of soiling:
–Light: Do not prewash; if
necessary, select the additional
programme setting
(SpeedPerfect
–Normal
–Heavy: Load less laundry, select
a programme with prewash
–Stains: Remove/pretreat stains
while they are fresh. Firstly, dab
with soapy water; do not rub.
Then wash the items of laundry
with the appropriate programme.
Stubborn or dried-in stains can
sometimes only be removed by
washing several times.
■Symbols on the care labels:
The numbers in the symbols indicate
the maximum washing temperature
that may be used.
–M: Suitable for a normal
washing process; e.g. the
Cottons programme.
–U: A gentle washing process is
required; e.g. the Easy-Care
programme.
–V: An especially gentle washing
process is required; e.g. the
Delicates/Silk programme
–W: Suitable for washing by
hand; e.g. the W/ Wool
programme.
–Ž: Do not wash the laundry in
the machine.
Starching
Note: Laundry should not be treated
with fabric softener.
Starching is possible in all wash
programmes if liquid starch is used.
Measure starch into compartment Min
accordance with the manufacturer's
instructions (clean first if necessary).
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
Soaking
1. Pour soaking agent/detergent into
compartment II in accordance with
the manufacturer’s instructions.
2. Turn the programme selector to the
Cottons 20 °C or 30 °C programme.
3. Press the Start button to start the
programme.
4. After approx. 10 minutes, press the
Start button again to pause the
programme.

en Detergent
12
5. After the required soaking time,
press the Start button again if the
programme is to be continued or
changed.
Notes
■Load laundry of the same colour.
■No additional detergent is required;
the soaking solution is used for
washing.
CDetergent
Detergent Correct selection of detergent
The care label is crucial to ensure
correct detergent selection, temperature
and laundry treatment. ~ See also
www.sartex.ch
Visit www.cleanright.eu to find further
information on detergents, care
products and cleaning agents for
domestic use.
■Standard detergent with optical
brighteners
Suitable for heat-resistant white
laundry made from linen or cotton
Select the Cottons programme,
cold – max. 90 °C.
■Detergent for colours without
bleach or optical brighteners
Suitable for coloured laundry made
from linen or cotton
Select the Cottons programme,
cold – max. 60 °C.
■Detergent for colours/delicates
without optical brighteners
Suitable for coloured laundry made
from easy-care fibres or synthetic
fibres
Select the Easy-Care programme,
cold - max. 60 °C.
■Detergent for delicates
Suitable for delicate, fine fabrics, silk
or viscose
Select the Delicates/Silk
programme, cold – max. 40 °C.
■Detergent for woollens
Suitable for woollen fabrics
Select the Wool programme,
cold – max. 40 °C.
Saving energy and detergent
For light and normal soiling, you can
save energy (by lowering the washing
temperature), and detergent.
Saving Soiling/note
Reduced temper-
ature and deter-
gent quantity as
per the recom-
mended dosage
Light
No visible dirt or stains. Cloth-
ing has absorbed body
odours, e.g.:
■Light summer/sports
clothing (worn for a few
hours)
■T-shirts, shirts, blouses
(worn for up to one day)
■Guest bed linen and hand
towels (used for one day)
Normal
Visible dirt or a few light
stains, e.g.:
■T-shirts, shirts, blouses
(sweat-soaked, worn a
few times)
■Towels, bedding (used for
up to one week)
Temperature as
per the care label,
and detergent
quantity as per
the recom-
mended dosage
for heavy soiling
Heavy
Dirt and/or stains clearly visi-
ble, e.g. tea towels, baby
items, work clothing

Programme default settings en
13
Note: When measuring the amount of
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information.
0Programme default
settings
Programmedefaultsettings The spin speed for all programmes is
preset at the factory.
You can change the default settings as
follows.
0Spin speed
(Spin, rpm, 0)
Depending on programme progress,
you can change the spin speed (in rpm;
revolutions per minute) before and
during the programme.
To do this, select the spin speed button
repeatedly until the indicator lamp for
the required setting lights up.
The maximum speed that can be
selected depends on the model and
programme that has been selected.
$Rinse Stop (without final spin)
setting: The laundry remains in the
water after the final rinse.
You can select $Rinse Stop (without
final spin) to prevent creasing if the
laundry is not taken out of the washing
machine immediately after the
programme has ended.
Overview of programmes ~Printed
supplement for the operating and
installation instructions
\Additional programme
settings
Additionalprogrammesettings Note: You can find possible additional
programme settings in the overview;
these differ depending on the model.
GSpeedPerfect
((Speed Perfect, Speed)
For a shorter wash time with a
comparable washing effect to the
standard programme.
Note: Do not exceed the maximum
load.
Programme overview ~
Supplementary sheet for the installation
and operating instructions
FEcoPerfect
(FEco Perfect, Eco)
Energy-optimised washing by reducing
the temperature, while achieving a
comparable result.
Note: The washing temperature is
lower than the selected temperature.
For special hygiene requirements select
a higher temperature or the additional
(SpeedPerfect programme setting.
pEasy-Iron
(pEasy Iron, Reduced Ironing)
For a gentle final spin with subsequent
fluffing. Residual moisture of the laundry
is increased slightly.
ZWater Plus
(ZExtra Water, Water Plus,
Aqua Plus)
Increased water level and additional
rinse cycle, extended washing time. For

en Operating the appliance
14
areas with very soft water or for further
enhancing the rinsing result.
ORinse Plus
(àExtra Rinse, Rinse Plus)
Additional rinse cycle. For areas with
very soft water or for further enhancing
the rinsing result.
1Operating the
appliance
Operatingtheappliance Note: Correctly install and connect
the washing machine. From
~Page 25
Before the first wash, run a wash
without any laundry. ~Page 31
Preparing the washing
machine
Notes
■Never switch on a damaged washing
machine.
■Inform the after-sales service.
~Page 24
1. Connect the mains plug.
2. Turn on the tap.
3. Open the washing machine door.
4. Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Use the programme selector to select
the required programme. Can be
rotated in both directions.
The machine is switched on.
Change the programme
default settings
You can use the displayed programme
default settings or adjust them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed. Then press the
Start button to start the programme.
Note: All buttons are sensitive and only
need to be touched lightly. If the buttons
are held for longer, the appliance
automatically runs through the setting
options.
The settings are activated without
needing to be confirmed.
They are not saved after the appliance
is switched off.
Programme default settings ~ Page 13
Programme overview from ~
Supplementary sheet for the installation
and operating instructions
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not saved when the
appliance is switched off.

Operating the appliance en
15
Additional settings ~Page 13
Programme overview from ~
Supplementary sheet for the installation
and operating instructions
Placing laundry into the drum
:Warning
Risk of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
■Mix items of laundry of varying sizes.
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual laundry
items may cause an unbalanced
load.
■Observe the maximum indicated
load. Overfilling adversely affects the
washing result and encourages
creasing.
1. Unfold pre-sorted items of laundry
before placing them in the washing
drum.
2. Make sure that no items of laundry
are trapped between the washing
machine door and the rubber seal,
and close the door.
The indicator light on the Start button
flashes, and the default settings for the
programme appear continuously on the
display panel. Changes may be made
to the default settings.
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Measuring
Dose the detergents and care products
according to:
■The water hardness (ask your water
supply company)
■The manufacturer's instructions on
the packaging
■The amount of laundry
■Soiling ~Page 12
Filling
:Warning
Eye/skin irritation!
Detergent and care products may run
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes/skin thoroughly if they come
into contact with detergents or care
products.
If swallowed accidentally, seek medical
advice.
Notes
■When measuring the amount of all
detergents, additives, care products
and cleaning agents, always follow
the manufacturer's instructions.
■Dilute thick-consistency fabric
softener and fabric conditioner with a
little water. This will prevent
blockages.

en Operating the appliance
16
■Pour liquid detergent into the
corresponding dispenser and place
in the drum.
Pour the detergent and care products
into the appropriate compartments:
1. Pull out the detergent drawer as far
as possible.
2. Add detergent and/or care products.
3. Close the detergent drawer.
Measuring aid* for liquid detergent
*depending on the model
Position the measuring aid for dosing
the correct amount of liquid detergent:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2. Slide the measuring aid forward, fold
it down and click it into place.
3. Reinsert the drawer.
Note: Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Press the Start button. The indicator
light lights up and the programme
starts.
Adding laundry
After starting the programme, you can
add or remove laundry:
1. Press the Start button to cancel the
programme.
The Start button indicator lamp
flashes and the machine checks
whether it is possible to add laundry.
Note: Do not leave the washing
machine door open for too long
when adding laundry, as water from
the laundry may leak out.
2. To continue the programme, press
the Start button again.
Changing the programme
If you have started the wrong
programme by mistake, you can
change it as follows:
1. Press the Start button to cancel the
programme.
2. Select a different programme.
3. Press the Start button again. The
new programme starts from the
beginning.
Cancel the programme
1. Press the Start button to cancel the
programme.
2. To cool the laundry: Select the Rinse
programme.
Measuring aid*
A
For liquid detergent
Compartment II Detergent for the main wash,
water softener, bleach, stain
remover
Compartment
i
Softener, starch,
do not exceed the maximum
Compartment IDetergent for prewash

Sensors en
17
3. Press the Start button again. The
Rinse programme starts.
After the programme has ended, you
can remove the laundry.
Programme end during
$Rinse Stop
The $Rinse Stop and 'Rinse
indicator lights light up and the indicator
lamp for the Start button flashes.
To end the programme:
1. Select the Spin or Empty
programme.
2. Press the Start button.
Programme end
The f Ready indicator light lights up
and the indicator light for the Start
button flashes.
If the NWash indicator light also
flashes, the washing machine has
detected too much foam during the
wash programme and automatically
switches on a rinse cycle to remove the
foam.
Note: Add less detergent to the next
washing cycle with the same load.
Removing laundry/switching
off the appliance
1. Open the washing machine door
and remove the laundry.
Note: If you cannot open the
washing machine door, the
appliance is still locked. Wait until
the programme has ended.
2. Set the programme selector to the
Off position. The appliance is
switched off.
3. Turn off the tap.
Note: Not required for AquaStop
models.
Scope of delivery ~Page 25
Notes
■Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■Leave the washing machine door
and detergent drawer open so that
any residual water can evaporate.
■Always remove the laundry.
■Always wait until the programme has
ended, as the appliance could still
be locked.
HSensors
Sensors Automatic load sensing
The automatic load sensing function
optimally adjusts the water consumption
to each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.

en Setting the signal
18
Note: Place large and small items of
laundry in the drum (from ~Page 23).
MSetting the signal
Settingthesignal
1. Activate setting mode for the audible signal volume
Set to Ú One increment Select and hold +one step Release
2. Optional: Blind mode* ON-OFF
*Short audible signal – function on.
Long audible signal – function off.
ON-OFF Skip Set to Ú
2. Set the volume for the button signals and information signals (depending on the model)
One increment Set the volume
(you may need to
select the func-
tion several
times)
One increment Set the vol-
ume (you may
need to select
the function
several times)
Set to Ú

Cleaning and maintenance en
19
2Cleaning and
maintenance
Cleaningandmaintenance :Warning
Risk of death!
There is a risk of electric shock if live
components are touched.
Switch off the appliance and pull out the
mains plug.
:Warning
Risk of poisoning!
Toxic vapours can be produced from
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Machine housing/control
panel
■Wipe the housing and the control
panel with a soft, damp cloth.
■Do not use any abrasive cloths,
scourers or cleaning agents
(stainless-steel cleaners).
■Remove the detergent residue
immediately.
■Cleaning with a water jet is
prohibited.
Drum
Wipe the inside of the rubber seal dry
with a cloth. Leave the washing machine
door open so that the drum can dry.
Use chlorine-free cleaning agents; do
not use steel wool.
Note: In order to keep the washing
machine clean, run it through on the
Cottons 90 °C programme on a regular
basis.
Descaling
Note: Make sure that there is no
laundry in the machine.
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from our
after-sales service. ~Page 24
Detergent drawer and housing
If there is detergent or fabric softener
residue:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer from the housing.
2. To remove the insert: Push the insert
upwards from below with your finger.
3. Clean the detergent dispenser tray
and insert with water and a brush,
and dry. Also remove any detergent
or fabric softener residue in the
housing.
4. Fit the insert and lock it in place
(push the cylinder onto the guide
pin).
5. Push in the detergent drawer.
Note: Leave the detergent drawer open
so that any residual water can
evaporate.

en Cleaning and maintenance
20
Detergent solution pump
blocked
:Warning
Risk of scalding!
When washing at high temperatures, the
detergent solution becomes hot. If you
come into contact with the hot detergent
solution, you may be scalded.
Allow the detergent solution to cool
down.
1. Turn off the water tap so that no
more water can flow in and has to be
drained via the detergent solution
pump.
2. Switch off the appliance. Pull out the
mains plug.
3. Open and remove the service flap.
4. For models:
–With a drainage hose: Remove
the drainage hose from its holder
and remove the sealing cap.
Allow the detergent solution to
flow out into a suitable container.
Replace the sealing cap on the
drainage hose, and place the
drainage hose back in its holder.
–Without a drainage hose::
Carefully unscrew the pump
cover until the detergent solution
begins to flow out.
When the service flap is half full,
close the pump cover and drain
the service flap.
Repeat the above steps until all
the detergent solution has
completely drained out.
5. Carefully unscrew the pump cover;
residual water may leak out.
Clean the interior, pump-cover
thread and pump housing. The
impeller in the detergent solution
pump must be able to rotate.
Refit and screw on the pump cover.
The handle must be in a vertical
position.
6. Put the service flap back on, lock it
into place and close it.
Note: To prevent unused detergent
from flowing straight into the drain
during the next wash: Pour 1 litre of
water into compartment II and start the
Empty programme.