Bose Acoustimass 500 User manual

SURROUND SPEAKERS

Choose your setup method
Your setup method depends on which soundbar you have.
Bose Soundbar 500, Bose Soundbar 700, or
Bose Smart Soundbar 300: See method 1.
SoundTouch 300 soundbar:See method 2.
START HERE
ENGLISH

METHOD 1
BOSE SOUNDBAR 500, BOSE SOUNDBAR 700, BOSE SMART SOUNDBAR 300
Set up using the Bose Music app
a. In the Bose Music app, from the My Products screen, select your soundbar.
b. Go to the Settings menu to add your surround speakers.
ENGLISH
New to Bose Music app?
Download the app and follow the app instructions to set up your soundbar and surround speakers.

METHOD 2
SOUNDTOUCH 300 SOUNDBAR
ab
Connect your adapters
a. Insert the color-coded speaker cable wires into their
corresponding terminals.
b. Turn the screws to the right (clockwise) to secure the wires into
the terminals.
c. Repeat steps a and b to connect your other adapter.
Identify switch settings on wireless receivers
a. Confirm that the switch on one wireless receiver is set to R(right).
b. Confirm that the switch on the other wireless receiver is set to L(left).
ENGLISH

METHOD 2
(CONTINUED)
c d
Connect your rear speakers
a. Insert the adapter into the back of the speaker.
b. Insert the two-pin connector into the wireless receiver.
c. Repeat steps 1 and 2 to set up your other speaker.
Place your rear speakers and wireless receivers
a. Facing your TV, place the speaker and Rwireless receiver on the right
side of your room.
b. Facing your TV, place the speaker and Lwireless receiver on the left side
of the room.
c. Connect to power.
ENGLISH

Connect the surround speakers to the soundbar
a. On your SoundTouch 300 remote, press e.
b. Press and hold Guntil lon the soundbar blinks white.
Once the surround speaker connects, you hear a tone and l
glows white.
NOTE: Connecting may take several minutes.
Set up ADAPTiQ audio calibration
a. Connect the ADAPTiQ headset (included with the soundbar) to the
soundbar’s aconnector.
b. Put the headset on your head.
ADAPTiQ
METHOD 2
(CONTINUED)
ef
ENGLISH

Run ADAPTiQ audio calibration
a. On your SoundTouch 300 remote, press e.
b. Press and hold Huntil gand lon the soundbar glow green.
NOTE: To cycle through languages, press dand con the
navigation pad.
METHOD 2
(CONTINUED)
g
worldwide.Bose.com/Support/WSS
m X o s W
w
ENGLISH

Elegir el método de configuración
El método de configuración depende de la barra de sonido que tenga.
Bose Soundbar 500, Bose Soundbar 700 o Bose Smart Soundbar 300:
Vea el método 1.
Barra de sonido SoundTouch 300:Vea el método 2.
COMENZAR AQUÍ
ESPAÑOL

MÉTODO 1
BOSE SOUNDBAR 500, BOSE SOUNDBAR 700, BOSE SMART SOUNDBAR 300
Configurar usando la aplicación Bose Music
a. En la aplicación Bose Music, de la pantalla Mis productos, seleccione la barra de sonido.
b. Vaya al menú de configuración y agregue los altavoces envolventes.
ESPAÑOL
¿Es la primera vez que usa la aplicación Bose Music?
Descargue la aplicación y siga las instrucciones de la aplicación para configurar la barra de sonido y los
altavoces envolventes.

MÉTODO 2
BARRA DE SONIDO SOUNDTOUCH 300
ab
Conectar los adaptadores
a. Inserte los cables del altavoz con código de color en las terminales
correspondientes.
b. Gire los tornillos hacia la derecha para asegurar los cables en las
terminales.
c. Repita los pasos a y b para conectar el otro adaptador.
Identificar la configuración de los interruptores en los
receptores inalámbricos
a. Confirme que el interruptor en un receptor inalámbrico se encuentre
en la posición R(derecha).
b. Confirme que el interruptor en el otro receptor inalámbrico se
encuentre en la posición L(izquierda).
ESPAÑOL