BOSER Technology HS-8605 User manual

HS-8605
Intel® Atom™ N270 processor SBC for Panel PC
©Copyright 2011 BOSER Technology Co., Ltd. v0.1 July 2011
Delivery Package Items
zHS-8605 Board x 1
zInstallation Quick Start x 1
zUtility CD Disk x 1
Keep all the parts of the delivery package intact and store them in a
safe/dry place for any unforeseen event requiring you to return this
product. If you discover any missing and/or damaged items from the list
of items, please contact your dealer immediately.
Default Jumper Settings
Before turning on the power to the HS-8605, please make sure that all
jumpers are on their default settings.
Jumper Default Setting Setting
CN12 COM 6 Use RS-232 or RS-422/485 Select: RS-232 Open
JP2 Clear CMOS: Normal Operation Open
JP3 AT/ATX Power Mode Select: ATX Open
JP4 LAN1 Enabled/Disabled Select: Enabled Open
JP5 Panel Voltage Select: +3.3V Short 1-2
JP6 CF Use Master/Slave Select: Slave Open
JP7 COM 1 Voltage Output Select: RI Short 1-2
JP8 COM 2 Voltage Output Select: RI Short 1-2
JP9 COM 3 Voltage Output Select: RI Short 1-2
JP10 COM 4 Voltage Output Select: RI Short 1-2

HS-8605
Intel® Atom™ N270 processor SBC for Panel PC
©Copyright 2011 BOSER Technology Co., Ltd. v0.1 July 2011
Connector List
Connector Definition
CN1 2-pin Power Button Connector
CN2 PS/2 6-pin Mini DIN KB & MS Connector
CN3 System Front Panel Control
CN4/CN6 RJ-45 Connector & Dual USB2.0 Port
CN5 Inverter Power Connector
CN7 LVDS Interface Connector
CN8 IDE Connector
CN9 COM5/COM6 Connector (10x2 header)
CN10 Parallel Port Connector
CN11 15-pin CRT Connector & COM6 Connector
CN13 SO-DDRII Socket
CN14 Mini PCIe Socket
CN15 COM1/COM2 Connector (DB9)
CN16 Internal USB2.0 Port
CN17 COM3/COM4 Connector (DB9)
CN18/CN19 Mini PCI Socket
CN20 Serial ATA Connector
CN21/CN24 PC/104 Bus 64-pin/40-pin Connector
CN22/CN28 16-bit GPIO
CN23 MIC In/Line Out Connector
CN25/CN26 AMP L-Output/R-Output Port
CN27 SATA Power Connector
CN29 Serial ATA HDD Plug Connector
CN30 CompactFlash Connector
FN1 Fan Power Connector
JP1 External Battery Connector
P1 3-pin Power Connector

HS-8605
Intel® Atom™ N270 processor SBC for Panel PC
©Copyright 2011 BOSER Technology Co., Ltd. v0.1 July 2011
Board Layout

HS-8605
Intel® Atom™ N270 processor SBC for Panel PC
©Copyright 2011 BOSER Technology Co., Ltd. v0.1 July 2011

HS-8605
Intel® Atom™ N270 processor SBC for Panel PC
©Copyright 2011 BOSER Technology Co., Ltd. v0.1 July 2011
Hardware Installation
zJP2: Clear CMOS
Options Settings
Normal Operation (default) Open
Clear CMOS Short
IMPORTANT: Before turn on the power of system, please set JP2 to
open for normal operation.
zJP3: AT/ATX Power Mode Select
Options Settings
ATX Mode (default) Open
AT Mode Short
zJP4: LAN1 Enabled/Disabled Select
Options Settings
Enabled (default) Open
Disabled Short
zJP5: Panel Voltage Select
Options Settings
+3.3V (default) Short 1-2
+5V Short 2-3
zJP6: CF Use Master/Slave Select
Options Settings
Slave (default) Open
Master Short
zJP7/JP8: COM1/COM2 Voltage Output Select
Options Settings
RI (default) Short 1-2
+5V Short 2-3

HS-8605
Intel® Atom™ N270 processor SBC for Panel PC
©Copyright 2011 BOSER Technology Co., Ltd. v0.1 July 2011
zJP9/JP10: COM3/COM4 Voltage Output Select
Options Settings
RI (default) Short 1-2
+12V Short 2-3
zCN12: COM6 use RS-232 or RS-422/485 Select
Options Settings
RS-232 (default) Open
RS-485 Transmit Only (*1) Short 1-2, 3-4, 5-7, 8-10
RS-485 by RTS (*1) Short 1-2, 3-4, 7-9, 8-10
RS-422/485 Full Duplex (*2) Short 1-2, 3-4, 6-8
NOTE: *1: 2-wires RS-485 function
*2: 4-wires point-to-point full duplex function
zCN1: 2-pin Power Button Connector
PIN Description
1 Power Button
2 GND
zCN3: System Front Panel Control
PIN Description PIN Description
1 330Ωpull VCC 2 Speaker
3 HDD LED 4 N/C
5 ATX Power Button 6 330Ωpull VCC
7 VCC 8 330Ωpull VCC
9 Reset Switch 10 VCC
11 GND 12 GND
1
3
5
7
9
11
2
4
6
8
10
12
Speaker
ATX
Power
LED
Reset
Button
HDD LED
ATX Power
Button

HS-8605
Intel® Atom™ N270 processor SBC for Panel PC
©Copyright 2011 BOSER Technology Co., Ltd. v0.1 July 2011
zCN5: Inverter Power Connector
PIN Description
1 +12V
2 +12V
3 VCC
4 BK_EN
5 LCD_EN
6 GND
zCN7: LVDS Interface Connector
PIN Description PIN Description
1 N/C 2 N/C
3 GND 4 GND
5 DATA_AN0 6 DATA_AN1
7 DATA_AP0 8 DATA_AP1
9 GND 10 GND
11 DATA_AN2 12 CLKA-
13 DATA_AP2 14 CLKA+
15 GND 16 GND
17 N/C 18 DATA_BN0
19 N/C 20 DATA_BP0
21 GND 22 GND
23 DATA_BN1 24 DATA_BN2
25 DATA_BP1 26 DATA_BP2
27 GND 28 GND
29 CLKB+ 30 N/C
31 CLKB- 32 N/C
33 N/C 34 12V
35 N/C 36 12V
37 LVDD_EN 38 VCC
39 BKLTEN 40 VCC
NOTE: LVDS cable should be produced very carefully. A0- & A0+ have to
be fabricated in twister pair (A1- & A1+, A2- & A2+ and so on)
otherwise the signal won’t be stable. Please set the proper voltage
of your panel using JP5 before proceeding on installing it.

HS-8605
Intel® Atom™ N270 processor SBC for Panel PC
©Copyright 2011 BOSER Technology Co., Ltd. v0.1 July 2011
zCN9: COM5/COM6 Connector (10x2 header)
PIN Description PIN Description
1 DCD5 2 DSR5
3 SIN5 4 RTS5
5 SOUT5 6 CTS5
7 DTR5 8 RI5
9 GND 10 N/C
11 DCD6 12 DSR6
13 SIN6 14 RTS6
15 SOUT6 16 CTS6
17 DTR6 18 RI6
19 GND 20 N/C
zCN11B: COM6 Connector (DB9)
PIN Description PIN Description
1
5
6
9
1 +5V 2 RX+
3 RX- 4 N/C
5 GND 6 N/C
7 TX+ 8 TX-
9 N/C
zCN16: Internal USB2.0 Ports
PIN Description PIN Description
1 VCC 2 VCC
3 USBD4- 4 USBD5-
5 USBD4+ 6 USBD5+
7 GND 8 GND
zCN22/CN28: 16-bit GPIO
PIN Description PIN Description
1 VCC 2 GND
3 GD0/GD8 4 GD4/GD12
5 GD1/GD9 6 GD5/GD13
7 GD2/GD10 8 GD6/GD14
9 GD3/GD11 10 GD7/GD15

HS-8605
Intel® Atom™ N270 processor SBC for Panel PC
©Copyright 2011 BOSER Technology Co., Ltd. v0.1 July 2011
zCN25/CN26: 2W Amplifier L/R-Output Connector
PIN Description
1 +SPK_LO/+SPK_RO
2 GND
3 -SPK_LO/-SPK_RO
zFN1: Fan Power Connector
PIN Description
1 GND
2 +12V
3 Fan Speed
zJP1: External Battery Connector
PIN Description
1 Battery
2 GND
zP1: 3-pin Power Connector
PIN Description
1 Power IN
2 GND
3 GND