BOSS ILLUMINATION ZETA User manual
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V05.20
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certied in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.
WARRANTY STATEMENT This product is covered by a 3 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will x
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specications and other information, modify products and discontinue items without prior notication.
ZETA
DOWNLIGHT
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
PRODUCT SPECIFICATIONS
Power : 10W
CCT Changeable : 3000K / 4000K / 5000K
Input Voltage : 240VAC
Ambient Temperature : -10 to 45°C
Dimming : Triac
ADDITIONAL INFORMATION
1. This product comes with a switch at the back of the heatsink to
switch between different colour temperatures.
2. BIA recommends using an adaptive phase dimmer with this
product.
3. This product is suitable to be installed into 90mm downlight
canisters for concrete ceiling.
4. This product is suitable for outdoor under cover use.
5. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
PARTS INCLUDED
OPTIONAL COMPATIBLE PARTS sold separately
Brushed
Chrome
Fascia
Black
Fascia
AU Plug Driver &
Luminaire
90mm IP44
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V05.20
CLEARANCE TABLE
Scenario 1: Uncovered luminaire
Scenario 2: Abutted and covered luminaire
This recessed luminaire is rated IC-4. Being abutted against
and covered under building materials including insulation do
not present a safety hazard. Do not cover the driver. Clearance
between luminaire, driver and building materials should meet
the recommendations above. Clearance is only recommended to
increase heat dissipation efficiency.
DIAMENSION DIAGRAM
Min. 15mm Min. 15mm
LED Driver
Combustible
Building
Element
Combustible Building Element
Thermal
Insulation
Min. 20mm
Combustible
Building
Element
Thermal Insulation
Ø110mm
66mm
INSTALLATION INSTRUCTIONS
1. Before commencing installation, ensure the main power is
switched off.
2. Measure and cut ceiling hole to 90mm.
3. Select desired colour temperature.
4. Optional: if using brushed chrome fascia,
fit fascia on and secure with pliers. Take care
not to scratch the surface of the fascia.
5. Connect plug to 240VAC power socket.
6. Push clips backwards, hold in place and insert luminaire into
prepared ceiling hole. Luminaire clips will spring into place.
7. Turn on main power.
5
6 6
4
90mm
3
Other BOSS ILLUMINATION Light Fixture manuals
