Lightolier 6706S2UEM User manual

6706S2UEM
Decorative, Discus, CFL, 1 Lt. 22W
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Ordering Information
Catalog Number Finish Wattage Voltage Lamping
6706S2UEM matte silver 22W 120V/277V Philips Sylvania
FC9T5/* FPC22/*
*Designates manufacturers’ color temperature.
10 9
64
1
5
2
3
87
9 ⅞" (251mm) dia.
8 ¼" (210mm) dia.
1 516"
(33mm)
4"
(102mm)
13 1516" (354mm) dia.
18" (457mm) dia.
ADA Compliant
w/Emergency
Battery Backup

6706S2UEM
Decorative, Discus, CFL, 1 Lt. 22W
Page 2 of 2
Philips Lightolier
e: [email protected]
t: [phone]
w: www.lightolier.com
6706S2UEM May 31, 2011
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011.All rights reserved.
Job Information Type:
Features
1. Diffuser: Acrylic, injection molded and bonded into one
piece assembly; 0.12" minimum thickness; 70% light
transmission. Lights evenly without discernible hot spots.
Integral tabs provide “twist-lock” installation; no loose
hardware, no tools required.
2. Housing: Polycarbonate, injection molded. Shatter resistant.
Integral bosses retain diffuser without loose hardware.
Tamperproof fastener is optional.
3. Ballast: Electronic; High power factor; Class P.
See Electrical/Ballast.
4. Lamp: 22W, T5, Circline; 2GX13 base (by others).
5. Lamp Socket: Polycarbonate, 4-Pin, 2GX13 base.
6. Lamp Support Clip: .020" thick, spring steel.
7. Battery Pack: Provides 90-minute emergency lighting when
AC power fails. Long life nickel cadmium battery; charges
from 120 and 277VAC. Meets National Electric and Life
Safety Code.
8. Charge Indicator Light: LED
9. Test Switch: Single Pole.
10. Trim Ring: 16 gauge die formed aluminum.
Brushed aluminum finish.
Mounting
Ceiling or wall (ADA compliant). Mounts to standard
4" outlet box.
Options
• Shatter resistant polycarbonate diffuser with tamper proof set
screw. Add TPR to end of catalog number.
+ Designates made to order only. Consult factory for lead times.
Electrical/Ballast
22W Lamps
120V 277V
Total Input Watts: 25 25
Max Line Current: .22 .10
Power Factor: >.98 >.98
Ballast Factor: 1.00 1.00
THD: <10% <10%
Min. Starting Temp: 0ºF 0ºF
Emergency/Ballast
Recharge Time Charging Current Lumens
24 hours 280MA 600
Labels
UL Listed. Suitable for dry locations.
10 9
64
1
5
2
3
87
9 ⅞" (251mm) dia.
8 ¼" (210mm) dia.
1 516"
(33mm)
4"
(102mm)
13 1516" (354mm) dia.
18" (457mm) dia.
ADA Compliant
w/Emergency
Battery Backup