impact Forever Ready Cool FRC-24-LED User manual

FRC-24-LED
Forever Ready Cool
4-LED Tube Light Fixture
INSTRUCTIONS

2
Introduction
Thank you for choosing Impact.
Impact’s Forever Ready Cool Light is a lightweight LED
replacement for your old uorescent xtures. This color-
corrected lamp is 5600 K daylight balanced, and the four LED
tubes are surrounded by diffusers for a soft, attering light
that will wrap around your subject and avoid multiple harsh
shadows. The LED tubes are cool to the touch, so they’re ideal
for photographing anything that’s sensitive to heat, like food
or people. The FRC-24-LED has a passive cooling system that
prevents overheating.
The FRC-24-LED light comes with a yoke for light stand mounting
and effortlessly aiming the light, and the built-in barn doors let
you shape the beam to your specications. The pebbled silver
reective surface on the barn doors maximizes light output.

3
Precautions ⚠⚡
• Please read and follow these
instructions, and keep this manual
in a safe place.
• Keep this unit away from water and
any ammable gases or liquids.
• Make sure the unit is powered
off when plugging it into a power
source.
• Use only the correct,
recommended voltage.
• Do not stare at the lights when they
are powered on.
• Handle the unit with care.
• Do not attempt to disassemble or
repair the equipment—doing so
will void the warranty, and Impact
will not be responsible for any
damage.
• Clean the unit with only a soft, dry
cloth.
• Use only parts provided by the
manufacturer.
• Make sure the item is intact and
there are no missing parts.
• All images are for illustrative
purposes only.

4
Overview
1Light xture
2Threaded knob (×2)
3Receiver attachment
nut
4Yoke
55/8 in. receiver
1
2
3
5
4

5
Setup
Attach the Yoke and Receiver
Gently remove the packing around
the bulbs.
1. Fit each bulb into its metal clip.
2. Press each bulb into its socket
until it clicks into place.
To remove a bulb, press and hold the
red release button, and gently lift the
bulb out of the xture.
1. Use the threaded knobs to attach the yoke to the light xture.
2. Use the included nut to attach the receiver to the yoke.
Connect the Lights

6
Powering the Light
1. Plug the light into an available
wall socket.
2. Press the power switches to
turn on the lights. Each switch
illuminates two of the bulbs.
Barndoors
• Leave the barndoors fully open for
a wide and unobstructed beam
that will ll a large space.
• Slightly close the barndoors to
limit light spill and amplify the light
that falls on your subject.
• Close the barndoors more fully
to limit the beam to a narrow
area that will illuminate only your
subject or create a narrow beam
of light on your background.
Use the barndoors to aim and shape the beam.
Replacement bulb
Impact offers a replacement bulb FRC-24-TB for the Forever Ready Cool.
Visit us online at ImpactStudioLighting.com for more information.

7
Light Fixture
LED Chip Type COB
Color Temperature 5600 K
Color Accuracy Standard CRI: 97.2
TLCI: 98
Cooling System Passive
Dimming No
Display None
Housing Material Aluminum
Light Intensity @ 3 ft. 3190 lx
Number of LEDs NA
Expected Lamp Life 50,000 hr.
Dimensions (L × W × H) 25.75 × 3.75 × 14 in. (65.4 × 9.5× 35.5 cm)
Weight 10.5 lb. (4.75 kg)
Specications
Connectors
Battery Plate NA
Power Input Connector 3 prong
Mounting
Fixture Mount 5/8 in. female
Yoke
Yoke Material Metal
Yoke Type Yoke/bracket
Tilt 180°
Power
AC Input Power 110 to 220 VAC, 50/60 Hz
Power Source Internal ballast

One-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from defects in materials
and workmanship under normal consumer use for a period of one (1) year from the original
purchase date or thirty (30) days after replacement, whichever occurs later. The warranty
provider’s responsibility with respect to this limited warranty shall be limited solely to repair
or replacement, at the provider’s discretion, of any product that fails during normal use of this
product in its intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has been discontinued,
the warranty provider reserves the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specic legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain
a return merchandise authorization (“RMA”) number, and return the defective product to
Impact along with the RMA number and proof of purchase. Shipment of the defective product
is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call
Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Impact is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved.
GG2