InnoGreen seneca series User manual

INSTALLATION MANUAL
Seneca Series
Cree LED Slim Street Light
Your reliable LED lighting partner.
R
innovation. efficiency. sustainability.
www.innogreen-usa.com
InnoGreen USA, LLC
200 Innovation Boulevard, Technology Center
Suite 241, State College, PA 16803 USA
Phone: [phone]
Fax: [phone]
Email: [email protected]
InnoGreen Middle East Trading Company, LLC
Suite 601, Arenco Tower, Dubai Media City
PO Box 500403, Dubai, United Arab Emirates
Phone: [phone]
Fax: [phone]
Email: [email protected]
InnoGreen Canada, Incorporated
7703 Boulevard Newman, Suite 203
Lasalle Quebec, H8N 1X7 Canada
Phone: [phone]
Fax: [phone]
Email: [email protected]
InnoGreen Europe Limited
1 Hanger Green, Park Royal W5 2EL
London, United Kingdom
Phone: [phone]
Fax: [phone]
Email: [email protected]

DESCRIPTION
InnoGreen Cree LED Slim Street Light is a cost effective lighting system that can replace the existing high
way, main street and road lighting. It provides bright light with low power consumption, no mercury, no
flickering, instant on and off, efficient heat sink, environmentally friendly and long life span.
DESCRIPTION
DESCRIPTIONPARAMETERS
- 20 to 50 deg C
Application Environment
IP 65
IP Rating
DESCRIPTIONDIMENSIONS Units: (mm)
INSTALLATION DRAWING
INSTALLATION AND MAINTENANCE
SAFETY PRECAUTIONS
● This product must only be installed by professionals.
● If there is any damage on the power line or the shell of the product, it should be
taken as defective and must not be used.
● High voltage product. Non-professionals are not allowed to maintain or install
the product.
PF
> 0.95 Other __________
A.
1. Set up light accessories and ttings.
2. Ensure that the power is off before installing.
3. Make sure that the product is xed tightly to the installation surface (install according to the diagrams).
4. Connect the wire of the product to the power supply, then switch on the power.
1. Set up light accessories and ttings.
2. Ensure that the power is off before installing.
3. Make sure that the product is xed tightly to the installation surface (install according to the diagrams).
4. Connect the wire of the product to the power supply, then switch on the power.
100-240VAC >0.95
Ik08
AB
C
D
55W Slim Street Light
A B
CD
594 340 157 60
B. 107W Slim Street Light 729 340 157 60
C. 160W Slim Street Light 864 340 157 60
D. 180W Slim Street Light 999 340 157 60
E. 210W Slim Street Light 999 340 157 60
PRODUCT REFERENCE A B
CD
PRODUCT REFERENCE