Dec. 1994 DS-1 (DS-1A)
0<5--| SERVICE NOTES
Qjstortion Second Edition
Having undergone minor modifications, the new DS-1 is different from DS-lrt'V 4—9&tiX
.
S:^<DDS-1 t§&
the old one in shape. The new DS-1 will be hereinafter referred to as CO iz &<0 £Ltz 0
the “DS-IA” and the old DS-1 as the “DS-1” .It should be noted lit £47°<UDS-1&* “DS-1A’
that some parts are not compatible between the “DS-IA” and “DS- ito IB 947<DDS-U£, “DS-1
1” .(For more information, see “The difference of DS-1A to DS-1” L£i~ c
(p.u). “ds-ia” t“Ds-i” tit*
Both the old and new products are marked “DS-1” on their pedals. (g¥#l}](£, “DS-IA <h DS-1 1(P.l) ltT^Dc)
—s"DS-1” tWEZiitD
ito
TABLE OF CONTENTS g&Page
THE DIFFERENCE BETWEEN DS-IA AND DS-1 DS-IAtDS-1 t<D'M^ 1
SPECIFICATIONS ttf§ 2
LOCATION OF CONTROLS A‘*ASSISI 2
EXPLODED VIEW 2
PARTS LIST /\°-yy 7. h3
CIRCUIT BOARD **513 (DS-IA) 4
CIRCUIT DIAGRAM M&M (DS-IA) -4
CIRCUIT BOARD **513 (DS-1) 5
CIRCUIT DIAGRAM 0i&l3 (DS-1) 5
APPENDIX ftIf 6
(HiRoland 17059769 Printed in Japan AIDO (DP) 1
THE DIFFERENCE BETWEEN
DS-IA AND DS-1
Because of IC modifications, the part name will be changed from DS-1
(ACAADAPTORTYPE) to DS-IA (PSA ADAPTORTYPE), beginning from
SNo.JG83100 of 1031 Lot (production in November, 1994)
Although the part name is changed, the marking “DS-1” will remain
indicated on the pedal of the products. Therefore, the following notes
should be referred to for distinguishing the DS-IA from the DS-1.
The DS-IA will have eight modified parts or items: the veneered box,
owner's manual, case, PCB (including components mounted on the PCB),
insulation spacer, bottom cover, bottom caution and adaptor caution.
•To distinguish between the DS-1 and DS-IA
1. Individual box :Check the printed pattern on the upper surface of the
individual box.
DS-IA
(PSA ADAPTOR TYPE)
DS-1 At DS-1 irtDjSlA
ic?e aidin', ds-i (aca adaptortype) *sds-ia (psa adaptor
TYPE) ICSNoJG83100,1031Lot(1994.1l£&)a' b t tc <0 £t.
£fWT)Slrt>GDSlAC'£bO£-frt!,DS-ltg/fcS
tiTV'ito DS-liDS-lA^KSiJLTT So.
rafif si*. a
tf), INSULATION SPEACER, BOTTOM COVER, BOTTOM CAUTION,
ADAPTOR CAIJTIONW8jS TT„
•DS-1 i; DS-1 A(DiSgyS-ao
1. ftWIS :J; SUj
DS-1
(ACA ADAPTOR TYPE)
2. Case:Check the shape of the adaptor jack. 2. T—7:79~f^ —v+-j ZM'/N
DS-IA DS-1
(PSA ADAPTOR TYPE) (ACA ADAPTOR TYPE)
When you require servicing parts for the DS-1 or DS-IA, be sure to check DS-1 )k UDS-IACO -a -fc*Xg|inn£lg;5j<'f -5 t§li, ±Idl,20ajSOcfc 0
the applicable part No. by the above two methods. &VMM tXTAl'«
•When you change the PWB Assy from the DS-1 to the DS-1 A, the •PWB Assy£DS-1 A'bDS-IAlC^KTS 1
1
..
following parts or items are required. Make an order for replacement TtSSl UTn|5i5o3^^(n|5fi^;±) 4LTT £C' 0
parts, referring to the tables below.
Items which must be replaced due to product mechanism •ISM#Jn&i*S?5! L&tlfitffc 6ts
.\ 'nftnn
Changes in parts DS-1 DS-IA
PWB Assy UNo.7520551007 UNo.70562634
CASE PNo.22017109 PNo.00780678
INSULATION SPACER PNo.2216750201
|
PNo.2216756000
BOTTOM COVER PNo.2202711601 PNo.2202785100
Items which must be replaced for safety standards •t.$M DA(tliliA C&l'3m
Changes in parts DS-1 DS-IA
ADAPTOR CAUTION PNo.2253753700 PNo.2253753801
BOTTOM CAUTION PNo.2253750302 PNo.2253740400
Additional items required for servicing the new product •511$, _h n(' mi(7/JTI nT-U- J? A: nil
S
Changes in parts DS-1 DS-IA
Owner's Manual PNO.G6017204 PNo.00780690
INDIVIDUAL BOX PNO.G2627187 PNo.00780689
*Modification from the DS-1 PWB Assy to the DS-IA is not possible by
replacing the components mounted on the PCB.
*V) ®S£#» DT,DS-1 PWBAssy hDS-IA PWB Assy^7)%
SliT-
Copyright© 1994 by ROLAND CORPORATION