Botex PSA-321 User manual

PSA-321
power distributor
User manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: [email protected]
Internet: www.thomann.de
18.09.2019, ID: 258280 (V2)

Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions..................................................................................................................................... 9
3 Features....................................................................................................................................................... 15
4 Installation and starting up................................................................................................................ 16
5 Connections and controls................................................................................................................... 17
6 Technical specications....................................................................................................................... 21
7 Protecting the environment.............................................................................................................. 23
Table of contents
PSA-321 3
power distributor

4PSA-321
power distributor

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
PSA-321 5
power distributor

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
6PSA-321
power distributor

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
General information
PSA-321 7
power distributor

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General information
8PSA-321
power distributor

2 Safety instructions
This device is used to distribute electrical power to multiple connected loads. The device is
designed for professional use only and is not suitable for use in households. Use the device
only as described in this user manual. Any other use or use under other operating conditions is
considered to be improper and may result in personal injury or property damage. No liability
will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
PSA-321 9
power distributor

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Safety
Safety instructions
10 PSA-321
power distributor

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
DANGER!
Electric shock caused by short circuit
Always use a properly insulated CEE cable to connect the unit to the 400 V mains
grid. Do not modify the CEE cable or the CEE plug. Failure to comply may result in
electric shock and risk of re and loss of life. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
PSA-321 11
power distributor

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety instructions
12 PSA-321
power distributor

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature uctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
Safety instructions
PSA-321 13
power distributor

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Safety instructions
14 PSA-321
power distributor

3 Features
n3-phase power distributor to 6 × 16 A
nDigital voltage (‘V’) and current (‘A’) display for each output
nInput
– Cable with CEE plug for 3 × 32 A (400 V)
nOutputs
– 6 × EU safety sockets with hinged lid for each 16 A (250 V)
– 1 × 5-pin CEE chassis socket with hinged lid for 32 A (400 V)
nCircuit breaker with trigger switch for each output
nFour-pole residual current device (RCD, residual current circuit breaker) for the input
nRobust steel sheet housing with black epoxy powder coating
nMetal front panel
n19" rack mountable
Features
PSA-321 15
power distributor

4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Create all connections while the device is o. Use power supply cables with earthed earthing
pin plug or 5-pin CEE-plug only.
The unit has been designed for rack mounting in a standard 19-inch rack; it occupies three rack
units.
Rack mounting
Installation and starting up
16 PSA-321
power distributor

5 Connections and controls
Front panel
Connections and controls
PSA-321 17
power distributor

1 Residual current device (RCD). This protective device, also known as ‘Fehlerstrom-Schutzschalter’ or ‘FI-Schalter’ in
German-speaking countries, is used for personal protection. As soon as it detects dierential current / fault current, it
automatically disconnects the device from the mains.
[T]: Button for manual triggering the residual current device (RCD).
[0]: Momentary switch for turning o the power supply
[1]: Momentary switch for turning on the power supply
2[1], … [6]
Line circuit breaker for the six outputs of the power distributor. In case of overload (> 16 A), the circuit breaker auto‐
matically disconnects the supply to the assigned CEE socket.
3[L1 / L2 / L3]
Measuring instruments for voltage (‘V’) and current (‘A’) of the three phases.
Connections and controls
18 PSA-321
power distributor

Rear panel
Connections and controls
PSA-321 19
power distributor

4 5-pin CEE chassis socket with hinged lid.
5 6 × EU safety socket with hinged lid for the six outputs.
6 Power cable with CEE plug.
Connections and controls
20 PSA-321
power distributor
Table of contents
Other Botex Amplifier manuals