BOULT Ripple User manual

Ripple
User Manual

Please read the instructions before use:
The company reserves the right to modify the contents
of this manual without notice. According to normal
circumstances some functions are different in a specific
software version.
The product should be charged for more than 2 hours
before use but avoid prolonged charging.
Please attach the magnetic charging cable to the
charging port of the watch correctly for charging.
Please use a: 5V/1A or 5V/2A rated charger, with the
original charging cable provided In the box.
Before using the product, please download the Boult Fit
application to your mobile phone, log in, and enter the
required Information.
Car chargers are not recommended for charging your
device (the voltage of the car is unstable when the car is
turned on and turned off).

Product specification
Product Name - Boult Ripple
Bluetooth Pairing Name - Boult Watch R+
Screen Size - 1.39 inches
IP Rating - IP67
Bluetooth Version - 5.1
Bluetooth Range - 10m
Sensors - HR, SpO2, Pedometer
Boult Ripple smartwatch
User manual
Magnetic charging cable
Warranty card
What’s in the box ?
.
How to wear
Please wear the device on your wrist correctly, about one
finger from the carpal, and adjust it to a comfortable
position.
Tip: Please wear the device a little tighter for accurate
functioning of the heart rate monitor

How to download & connect to ‘Boult
Fit’ App
“Boult Fit” App download method
1. For iOS users, the App can be downloaded from the
App store.
2. For Android users, the App can be downloaded from
Google play store.
To Install the App, please register and log in according
to the interface prompts, and make sure that the
Bluetooth is turned ON.
In the device interface, select the Bluetooth name
“Boult Watch R+” for connecting, and the watch can be
used normally.
Tips
1. For a first-time connection with Android, “Permissions”
reminder will pop-up. Please follow the guidance and
allow permissions to ensure all functions work properly.
2. Mobile phone system of Android 5.0 or iOS 9.0 or above
is recommended.
3. Please upgrade the app to the latest version to get a
better experience.
4. For a first-time connection with an iPhone, “Pair”
reminder will pop-up. Click on Pair, for incoming calls
and instant messages to be pushed.

5. To connect successfully, please turn on the mobile
phone‘s Bluetooth, GPS and mobile network.
6. If the device cannot be searched or connected during
use, please reset or turn off the watch and try again.
Operating Instructions
(A). Quick settings: Slide down from main page to go to
shortcut page.
(B). Notification: slide up from the watch face main
page to see the notifications.
(C). Go to menu: Slide from left to right from the watch
face main page to enter the menu list.
Do not disturb: After turning it on, the watch will no
longer receive messages.
Restart: : Restart the watch in settings or hold the power
button for 5 seconds to get the restart option.
Version: Displays the watch Bluetooth name and
version number.
Reset: Restores factory settings.
Using Quick View: With Quick View, you can view the
time or a message from your phone on your
smartwatch without taping. Simply turn your wrist in
your direction, and the time screen will appear for a
brief period of time.
Using in wet conditions: Your gadget is water-resistant,
which means It can withstand even the sweatiest
workout while remaining splash and rain-proof.
NOTE:
Do not wear your Smartwatch when swimming.
Additionally, even while bathing with your wristband
won't harm It, wearing it constantly prevents your skin
from getting enough oxygen. When your wristband gets
wet, properly dry it before re-putting it on.

(D). Activities Tracker: Slide from right to left to see the
activities tracker
Function introduction
Phone Calling: Keep a record of your
phone calls, add contacts synchro-
nously, and use the watch to make
calls. More details can be viewed in the
App.
Heart rate monitoring: Click on the
heart rate page to measure your heart
rate. More App monitor operations and
test data can be viewed in the App.
Blood Pressure: Measure the current
blood pressure. The watch can record
and display the pressure value 24 hours
a day. More detailed information
analysis and data records can be
viewed In the App. The values are for
reference only and cannot be used for
medical purposes.

Blood Oxygen: Record your Blood
Oxygen status. The watch can record
and display blood oxygen levels 24
hours a day. More detailed information
analysis and data records can be
viewed In the App. The values are for
reference only and cannot be used for
medical purposes.
Activity Data: Record the number of
steps, distance & calories of the day.
More detailed information analysis and
data records can be viewed in the App.
120+ Sports Mode: Enjoy multiple sports
modes like Running, Rock Climbing,
Skipping, and many more. More details
can be viewed in the App
Sleep: Records and displays the total
sleep time (deep sleep and light sleep)
of the previous night. More detailed
Information analysis and data records
can be viewed in the App.
Music: Access the Play/Pause/Previ-
ous/Next and volume controls on the
phone when connected to the App.

BT Camera Control: After connecting to
the phone, the watch can be used as a
remote control for the phone’s camera.
Click on the watch camera control page
to control the phone camera shutter.
Message: Get message reminders, sync
notification push from your phone. It
saves 8 latest messages reminders.
Weather: Displays the current weather
status as well as the forecast for the
next 3 days. Make sure Bluetooth is
connected.
Remind to Drink: The device will remind
you to drink water at scheduled time
intervals. More details can be viewed in
app.
Remind to Move: The device will remind
you to move after one hour of resting.
More details can be viewed on the app

Stopwatch: Let's you record time easily.
Alarm: 8 alarm reminders can be set.
The watch will vibrate, and the screen
will be bright
Other functions: Find watch, 12/24h
time system, sedentary reminder, low
battery reminder, incoming call
reminder, online dial/custom dial, unit
setting, calculator, female menstrual
tracking, and raise to wake.
Other settings: Dial/Menu view/Bright-
ness/Sound settings/About/Power,
Reset/App Download.
Timer: After selecting the correspond-
ing time, start the timer, and the timer
will end with a vibration.
Brightness adjustment: Brightness or darkness can be
adjusted.
Power on/off: Press and hold the side button for 5
seconds on the dial page.
Power saving mode: When turned on, the brightness
drops to the lowest level, and the incoming message
does not vibrate to remind.

Scan & Download ‘BoultFit’ App
Do not disturb: After turning it on, the watch will no
longer receive messages.
Restart: : Restart the watch in settings or hold the power
button for 5 seconds to get the restart option.
Version: Displays the watch Bluetooth name and
version number.
Reset: Restores factory settings.
Using Quick View: With Quick View, you can view the
time or a message from your phone on your
smartwatch without taping. Simply turn your wrist in
your direction, and the time screen will appear for a
brief period of time.
Using in wet conditions: Your gadget is water-resistant,
which means It can withstand even the sweatiest
workout while remaining splash and rain-proof.
NOTE:
Do not wear your Smartwatch when swimming.
Additionally, even while bathing with your wristband
won't harm It, wearing it constantly prevents your skin
from getting enough oxygen. When your wristband gets
wet, properly dry it before re-putting it on.

Warranty
1. One-year warranty for default hardware defects,
charging cable.
2. Below reasons for defects are not included in free
warranty service:
(1) Personal assembling or disassembling
(2) Damage due to dropping the product during use.
(3) All man-made damages or due to the third party's
fault, Improper use (such as: water in the smartwatch,
external force shattering, scratches during use, etc.)
3. Please provide the warranty card and contact direct
dealers for the warranty service.
4. Please note that all the functions of the product are
based on physical objects.
Notes:
1. To ensure water resistance works right, please DO
NOT:
(1) Wear the watch while swimming, hot shower, or drop
hot tea and other corrosive liquids.
(2) Remove any screws or buttons.