Other function operation
Rearview function
In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial
running state after reversing the car.
Warning
Do not rely on CCD system completely, please make sure
your car is safe by your eyes during driving. Back rearview
system only assists in driving. As the distance range of
rearview system is limited, completely relying on the
rearview system during driving may cause accidents.
Reverse field simulation Rearview backup image
Steering wheel setting
1.
2.
3.
4.
Note: To modify function settings, repeat procedures 3~4.
To reset functions, click [Reset] icon, all the settings set before shall be cleared, repeat procedures 3~4 for resetting.
Click on the [Steer] icon in the main interface into the steering wheel settings interface.
The original vehicle to the control line positive, negative with the machine control line in the
positive and negative connection.
Click the steering wheel buttons will appear corresponding operating tips, and fundamental
operation prompts the steering wheel feature set.
Set function to save the settings and click the Confirm icon to confirm.
Radio Function Operation
1.
Touch [Radio] icon in the main interface to enter into the radio interface.
Enter/exit
Touch icon to return to main interface, and then touch other function icons so as to exit
radio mode.
2. Band selection
Click icon so as to switch among FM1, FM2, FM3, AM1, AM2 bands.
3. Search/Save radio stations
Short press icon to browse the stored radio stations. FM band can save 18 radio stations
(Six stations for FM1/FM2/FM3), AM band can save 12 radio stations (Six stations for AM1/AM2).
4. Sound setting
Click icon to access sound setting interface.
5. Turn on/off the Long/Short-range
Click icon, the search pattern in the local search (LOC) and remote search (DX) switch between.
LOC feature is turned on after the signal is strong enough only to listen to those in good condition
and receiving radio station; DX enabled, you can receive remote weak radio signals.
Note: This function is available only when FM band is selected.
6. Loudness on/off
Click icon so as to turn on/off loudness function.
7. Stereo on/off
When receiving stereo signals, click icon to turn on/off stereo.
8. TA (Receive traffic information)
ON: When the traffic station is turned on, the radio will automatically search for traffic stations. After a station is searched, screen
displays “TP”. Only when traffic information is broadcasted can it be received, after traffic information is completed, the radio will
automatically switch to the previous mode.
OFF: Repress [TA] button to close TA function. In other modes, traffic announcement will automatically switch to radio mode, after the
traffic announcement is completed, it will automatically switch to the previous mode.
9. AF
Touch the button to turn the AF function on/off. AF function is turned on, When the received station signals become weak, the radio
will automatically fine-tune to other frequencies. When receiving an emergency announcing, the screen will display warning message.
10. PTY
Touch the button the screen displays program types, users can search station according to program type.
Note: If the unit does not have RDS function, it has no AF/TA/PTY function.
