Boyo AVS3015 User manual

DISC/VCD/CD/CD-R/CD-RW/MP3/MPEG4 Compatible
Sub-woofer Output Socket
Memory card slot
Front Panel USB Input Port
Remote Control
4 x 40 W High Power Output
AM/FM Radio-tuner
3.0” Widescreen Digital TFT LCD Display
Fold Down Detachable Panel
Anti-Shock Mechanism
ISO Connectors for Power Supply and Speaker Outputs
Built-in BT hands-free system
AV input and AV Output Socket
CAR MULTIMEDIA DISC/VCD/MP3 PLAYER
User’s Manual
AVS3015
AV IN
MIC
PUSH
MENU
MODE 1
ST
LOC
3
RPT
AS
PS
4
RDM
2
INT
5
STOP
BAND
6
GOTO
MUTE
DISP
AVS3015

Page CONTENTS
Page 01
01 Contents
02 Safety information
03 Installation
0 Using the detachable front panel
0 Wiring diagram
0 Operations
0
Us
General perations
Radio perations
perations
1 perations
USB operations
card operations
AV input operations
1B
Setup
2 Attachment
2 Trouble shooting
2 Specifications
5
6
7
7 Location and function of keys
08 ing the remote control
09 o
10 o
11 AV menu settings
13 Disc o
4 Special disc o
16 Data disc operations
17
17 Memory
17
8 T hands-free function
20
3
4
5

Page 02
CAUTION:
WARNING:
Region Management Information
Mobile disc player is a class 1 laser
product. However this mobile disc player
uses a visible/invisible laser beam which
could cause hazardous radiation
exposure if directed. Be sure to operate
the mobile disc player correctly as
instructed.
Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
Do not open covers and do not repair
yourself. Refer servicing to qualified
personnel.
- To reduce the risk of fire or electric
shock, do not expose this equipment to
rain or moisture.
- To reduce the risk of fire or electric
shock, and annoying interference, use
only the recommended accessories.
- This device is intended for continuous
operation.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by macro vision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macro vision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macro vision
Corporation. Reverse engineering or
disassembly is prohibited.
Region Management Information: This
Mobile Player is designed and
manufactured to respond to the Region
Management Information that is
recorded on a disc. If the Region number
described on the disc does not
correspond to the Region number of this
Mobile Player, this Mobile
Player cannot play this disc.
disc
disc disc
Safety Information
Handling and Cleaning
Disc Cleaning
- Dirt, dust, scratches and warping discs
will cause disoperation.
- Do not place stickers or make scratches
on discs.
- Do not warp discs.
- A disc should always be kept in its case
when not in use to prevent from damage.
- Do not place discs in the following
places:
1. Direct sunlight.
2. Dirty, dusty and damp areas.
3.Near car heaters.
4.On the seats or dashboard.
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, Use a soft cloth
slightly moistures with isopropyl
(rubbing) alcohol. Never use solvents
such as benzene, thinner or conventional
record cleaners as they may mar the
surface of the disc.
A disc may become somewhat
scratched (although not enough to make
it unusable) depending on the way it is
handled and conditions in the usage
environment. Note these scratches are
not an indication of any problem with the
player.
Note:
Disc notes
Be sure to use discs with following marks
only for the unit to play:
-D VIDEO/D AUDIO
(12CMdisc)
- VIDEO CD / AUDIO CD
(12CMdisc)
- MP3 /WMA /JPEG / MPEG4
(12CMdisc)
isc isc

Page 03
Notes:
- Choose the mounting location where
the unit will not interfere with the normal
driving function of the driver.
- Before finally installing the unit, connect
the wiring temporarily and make sure it is
all connected up properly and the unit
and the system work properly.
- Use only the parts included with the unit
to ensure proper installation. The use of
unauthorized parts can cause
malfunctions.
- Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
- Install the unit where it does not get in
the driver's way and cannot injure the
passenger if there is a sudden stop, like
an emergency stop.
- If installation ang e exceeds 30°from
horizontal, the unit might not give its
optimum performance
l
.
- Avoid installing the unit where it would
be subject to high temperature, such as
from direct sunlight, or from hot air, from
the heater, or where it would be subject to
dust, dirt or excessive vibration.
Din Front/Rear-Mount
This unit can be properly installed
either from 'Front' (conventional DIN
Front-mount) or 'Rear' (DIN Rear-mount
installation, utilizing threaded screw
Holes at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.
Installation
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a
ballpoint pen or pencil as shown on the
right. To remove the rough edges, press
the side of the pen or pencil against the
inside and outside edges of the disc.
Take Out Screw Before Installation
Before install the unit, please remove
the two screws.

Page 04
7. Reconnect the wire harness and the
antenna and be careful not to pinch any
wires or cables.
8. Slide the unit into the sleeve until it
locks into place.
9. To further secure the unit, use the
supplied metal strap to secure the back
of the unit in place. Use the supplied
hardware (Hex Nut (M5mm) and Spring
Washer) to attach one end of the strap to
the mounting bolt on the back of the unit.
If necessary, bend the metal strap to fit
your vehicle's mounting area. Then use
the supplied hardware (Tapping Screw
(5x25mm) and Plain Washer) to attach
the other end of metal strap to a solid
metal part of the vehicle under the
dashboard. This strap also helps ensure
proper electrical grounding of the unit.
Note to install the short threading
terminal of the mounting bolt to the back
of the unit and the other long threading
terminal to the dashboard.
6. Mount the sleeve by inserting the
sleeve into the opening of the dashboard
and bend open the tabs located around
the sleeve with a screwdriver. Not all tabs
will be able to make contact, so examine
which ones will be most effective.
Bending open the appropriate tabs
behind the dashboard to secure the
sleeve in place.
1. DIN FRONT-MOUNT (Method A)
Installing the unit
Be sure you test all connections first,
and then follow these steps to install the
unit.
1. Make sure the ignition is turned off,
and then disconnect the cable from the
vehicle battery's negative (-) terminal.
2. Disconnect the wire harness and the
antenna.
3. Press the Open ( ) button to remove
the control panel (For details, refer to
'USING THE DETACHABLE FRONT
PANEL').
4. Lift the top of the outer trim ring then
pull it out to remove it.
5. Use the two supplied release keys to
remove the unit from the mounting
bracket. Insert the left (“L”) and right
(“R”) release keys as far as they will go
(with the notches facing up) into the
appropriate slots at the middle left and
right sides of the unit. Then slide the
sleeve off the back.
Installation Opening
This unit can be installed in any
dashboard having an opening as shown
below:
182 mm
53 mm
10. Reconnect the cable to the vehicle
battery's negative (-) terminal.
Then replace the outer trim ring and
install the unit's front panel.
Notch

Page 05
If your vehicle is a Nissan, Toyota, follow
this mounting instruction. Use the screw
holes marked T (Toyota), N (Nissan)
located on both sides of the unit to fasten
the unit to the factory radio mounting
brackets supplied with your vehicle.
Fasten the unit to the factory radio
mounting brackets. Align the screw holes
on the bracket with the screw holes on
the unit, and then tighten the screws
(5x5mm) on each side.
Note: the outer trim ring, sleeve and the
metal strap are not used for method B
installation.
2. DIN REAR-MOUNT (Method B)
Removing the unit
1. Make sure the ignition is turned off,
and then disconnect the cable from the
vehicle battery's negative (-) terminal.
2. Remove the metal strap attached the
back of the unit (if attached).
3. Press the release button to remove the
front panel.
4. Lift the top of the outer trim ring then
pull it out to remove it.
5. Insert both of the supplied keys into
the slots at the middle left and right sides
of the unit then pull the unit out of the
dashboard.
Using the detachable front panel
2 Grasp the right side of the front panel,
then gently push the front panel towards
the left side before pulling it out from the
unit.
.
3 Store the front panel in the protective
case provided for safe keeping.
.
Removing and protecting detachable
front panel
1
2
front panel
front panel
OPEN button
protective case
TO ATTACH THE FRONT PANEL
Hold the right side of the front panel with
the plate facing down.
First attach the left side of the front panel
to the unit by inserting the hole into the
left holder.
Then slightly push it leftwards and attach
the right side hole into the right holder.
Finally push up the front panel.
The front panel of the unit may be removed
as a theft deterrent. After removing the
front panel, use the case provided to keep
the front panel from getting damaged.
1 Press the OPEN button to flip down
the front panel.
.

Page 06
Wiring diagram
Parking Brake switch
(Activated by parking brake)
Car Battery
Parking brake
indicator Light
Parking brake contactor
Video activation wire (Pink/Black)
To a metal part or chassis of your car
For security reasons, it is only possible to view the video display when the pink and black wire is
connected to the parking brake contactor (ground). The unit will only play videos when the parking
brake is engaged. If this is not the case, the LCD screen will display the message “
”. This is a safety feature designed to prevent the driver from watching a video while
driving.
DISABLED
WATCH VIDEO!
The video output of this unit is not affected by this.
Note:
1. Watching the video monitor is forbidden while driving.
2. In radio mode or CD/MP3 mode, the images will be displayed on the monitor whether or not the
parking brake is engaged.
Connecting the parking brake wire to the parking brake system built in the car
FUSE 15A
(VIOLET)
(VIOLET / BLACK)
(GRAY)
(GRAY / BLACK)
(WHITE)
(WHITE / BLACK)
(GREEN)
(GREEN / BLACK)
Ground Wire B- (Black)
+12V Accessory / Switch (Red)
Power Antenna / Amplifier Turn on (Blue)
+12V Constant Power supply (Yellow)
Rear Right Speaker
Rear Left Speaker
Front Right Speaker
Front Left Speaker
4-speaker System
ISO connector:
Part A:
A1:
A2:
A3:
A4:
A5:
A6:
A7:
A8:
No Connect
No Connect
No Connect
Battery B+ (Yellow)
Antenna (Blue)
No Connect
Accessory (Red)
Ground B- (Black)
Part B:
B1:
B2:
B3:
B4:
B5:
B6:
B7:
B8:
Rear Right + (Violet)
Rear Right - (Violet/Black)
Front Right + (Gray)
Front Right - (Gray/Black)
Front Left + (White)
Front Left - (White/Black)
Rear Left + (Green)
Rear Left - (Green/Black)
RCA connector to rear left output (White)
Sub-Woofer output socket (Green)
RCA connector to rear right output (Red)
BT Antenna
Radio Antenna Socket
RCA connector to front left output (White)
RCA connector to front right output (Red)
Video output socket 1
(Yellow)
Video output socket 2
(Yellow)
Parking brake wire B ( )- Pink/Black
15
ISO CONNECTOR

Page 07
Operations
Location and function of keys
Front panel:
24
22
25
23
35
4
1 2 9
10
17 18
8
11 12 13 19
20
16
15
21
The car radio after removing the front panel:
Descriptions of Function Controls
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
Power on/off ( ) Button, MODE Button
MUTE Button
ST(Stereo/mono) Button, LOC/DX Button
Preset Station 1 Button, (Play/Pause), Numeric 1 Button
Preset Station 2 Button, INT (Intro Scan), Numeric 2 Button
Preset Station 5 Button, STOP, Numeric 5 Button
Preset Station 4 Button, RDM (Random), Numeric 4 Button
IR Remote Control Sensor
Open ( ) Button
DOWN ( ) Button
Tune down, Seek down; Previous track , fast reverse
Volume increase or decrease Knob, MENU Button
DISP(Display) Button
UP ( ) Button
Tune up, Seek up; next track, fast forward
Built-in Microphone (MIC) for BT function
AS/PS (Automatic Search & Preset memory
Scan) Button, Button
Preset Station 3 Button, RPT (Repeat),
Numeric 3 Button
3 inch Wide screen TFT LCD Monitor
Preset Station 6 Button, GOTO,
Numeric 6 Button
BAND Button, Button
A/V IN (Audio/Video Input) Jack
USB Port
Memory Card Slot
Disc slot
Eject Disc ( ) key
Anti-theft LED Indicator
RESET Button
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
67
26
14
AV IN
MIC
PUSH
MENU
MODE 1
ST
LOC
3
RPT
AS
PS
4
RDM
2
INT
5
STOP
BAND
6
GOTO
MUTE
DISP
AVS3015

Remark:
♦
♦
♦
♦
Before you using the remote control,
please take the transparent insulator
slice off the bottom of remote control.
Point the remote control at the remote
sensor within 2 meters.
It may not be possible to operate the
remote control if the remote control
sensor is exposed to direct sunlight.
Operation angle: about ±30°in each the
direction of the front of the remote
sensor.
- The remote control is a small,
lightweight precision device. To avoid
damage, short battery life, operational
errors and poor response, observe the
following.
- Do not subject the remote control to
excessive shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and
dirt.
- Do not place in direct sunshine.
Battery replacement
Battery type: a button cell lithium battery
(CR2025 3V)
1. Remove the battery holder by
pressing the locking tab with your thumb
and pulling it out.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
Power on/off ( ) Button, Mute Button
DISP(Display) Button
A-B Button
RPT (Repeat) Button
ZOOM(Zoom in /Zoom out) Button
Cursor Buttons ( )
ENTER Button
SETUP Button, BT MENU
Tune down, Seek down, previous track Button
Tune up, Seek up, next track Button
TITLE( DVD Title Menu) / PBC(Playback Control) Button
(Play/Pause) Button
Preset stations 1~6 Button, Numeric 1~6 Button
Numeric 7 Button
Numeric 8 Button
MODE Button
AUDIO(Audio Setup Select) Button
SUB-T(Subtitle Language select) Button
Button
Button, ANGLE( ) Button
Volume +/- Button
MENU Button
Camera angle selection for some disc
◄/►,▲/▼
Descriptions of Function Controls
Fast Forward Button, Button
Fast Reverse Button, # Button
GOTO Button
AS/PS (Automatic Search & Preset memory Scan) Button
(Stop) Button, DEL(Delete) Button
PROG(Programmed play mode), LOC/DX Button
RDM (Random) Button, MO/ST Button
Numeric 0,+ Button, BAND Button
Numeric 9 Button
(23)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
Using the remote control
12
18
14
1
2
3
15
17
27
5
16
4
6
7
8
9
10
11
13
19
20
21
22
23
24
25
26
28
29
30
A-B RPT SUB-T AUDIO
ZOOM
GOTO
PROG
RDM
TITLE
DISP MODE
PBC
TRK/TUN
VOL
98
7
123
6
5
4
LO/DX
MO/ST
BAND
MENU
AS/PS
MUTE
ANGLE
BT MENU
SETUP
ENTER
DEL
0
A
B
Page 08
AVS3015

3. Closing the cover
Gently push in the holder until securely
locked into place.
2. Replacing the battery
Replace the battery with the same type
and the (+) side facing up.
Adjusting the volume level
ESP function
the on the ,
or the or button on the
remote control to adjust volume level.
to access the source selecting interface:
Then you can switch between the current
playback mode and the source interface, so
that you can select the source: RADIO,
DISC, USB
AV IN by pressing the / on the
front panel or pressing the / , / or
button on the remote control.
- During disc, USB, memory card playback,
press the button to switch to a
different mode, when you next return to the
previous disc, USB, memory card playback
mode again, the unit will resume playing
from the point that it was interrupted.
VOL+ VOL-
MODE
,
Rotate volume knob front panel
press
This unit has the electronic shockproof
feature. So that if the unit skips due to
rough road conditions, the music or video
will be uninterrupted.
In power on mode, press button to
(with USB device inserted),
Memory card (with memory card inserted),
BT
◄►
▲/▼
- During disc, USB, memory card playback,
press and hold the button to turn
off the unit, when you next switch on it, the
unit will resume playing from the point that it
was interrupted.
To select playback mode
Last position memory feature
MODE
POWER
Anti-theft LED Indicator
Mute on/off
Designed as a theft deterrent, the red LED
will flash when the unit is turned off and the
front panel is removed.
When the unit is switched on, press the
button to turn off the sound instantly.
Press the again to return it to the
prior sound level.
MUTE
MUTE
General operations
Reset the unit
Power on/off
Operating the unit for the first time, after
replacing the car battery or changing the
connections, you must reset the unit.
1.Turn off the unit power.
2.Press the ( ) button to fold down
the front panel and remove it, then press
the button with a ballpoint or similar
object to restore the unit to the original
factory settings.
In power off mode, switch on the unit by
pressing any button except the ( )
button and or inserting a disc to disc slot.
When the system is on, press and hold the
on/off ( ) button long to turn off
the unit.
Open
RESET
Open
POWER
Page 09

Radio operations
To select the radio mode
Press the button to access the
source interface, then press the / on
the or press the / , / or
button on the remote control to select
the radio mode. You will see the following
radio screen on the
one of the the
Press the button on the front panel
MODE
ST/LOC
Stereo/Mono
front panel ◄ ►
▲/▼
TFT screen.
In radio mode, Press the button
repeatedly to select radio
broadcasting bands: ->FM 1-> FM 2 -> FM 3
->AM1->AM2.
Press the or button, the automatic
search will start. It will search upward or
downward for the strong signal radio station
within the current band.
Press and hold the or button until
“MANU” appears on the TFT screen, it will
change into manual searching mode.
Press the or button repeatedly to
manually search upward or downward step
by step for the desired radio station within
the current band. For fast manual
searching, press and hold the or
button.
In manual search process, if the both
buttons haven’t been pressed within 5
seconds, it will change into automatic
search mode automatically. “MANU”
disappears on the TFT screen.
FM station is received in stereo mode.
However, if the signal weak or reception is
not as good as you would like, switching to
MONO mode usually improves the overall
sound quality.
To select a radio band
Auto/ Manual tuning
BAND
- Automatic search mode:
- Manual search mode:
or briefly press on the remote
control to choose FM STEREO or MONO
audio effect.
In urban settings, most stations are strong
enough and it should be set in LOCAL
mode.
Switch to DX (distant) mode to search for
stations with weaker signals.
Press and hold the button on the
front panel or briefly press the
button on the remote control to choose local
reception or DX(distant) reception mode.
You can store up to a total of 30 radio
stations in the memory (18 FM,12 AM),
manually or automatically.
- Select a band (if needed)
- Select a station by or button, refer
to auto / manual tuning.
-HoldaPre-setbutton( - )foratleast2
seconds.
- Select a band (if needed).
-Pressapresetbutton( - )brieflyto
recall the stored station.
Press the button to scan each preset
station. It will play a station for a few
seconds, then go to next station until all 6
stations are scanned, finally the radio will
play at the preset station where scanning
started. The preset station number on the
LCD will flash during the process. When
you hear a station that you wish to listen to,
press the again to stop the preset
scanning.
Press and hold the button for more
than 2 seconds to start auto store. The radio
will scan from the lowest frequency, and
automatically store the 6 strongest stations
into the preset memories. When auto store
is complete, the radio will start preset scan
to the stored 6 station
MO/ST
ST/LOC
LO/DX
- To store a station:
16
- To recall a station:
16
- Preset scan:
AS/PS
AS/PS
- Auto store:
AS/PS
.
Local/Distant
To store / recall a preset radio stations
Auto store / Preset scan
LOC
VOL 32
1
Stereo/mono
Local/distant
Radio band
Frequency
Clock
Volume
Preset
station
number
Page 10

Setup Menu
VOL+ VOL-
Time: ON/OFF
Time. M: 12/24
BEEP ON/OFF
Clock setting:
VOL+ VOL-
1.
to select a
menu item.
2.
press the or button
on the remote control to adjust the item
you have selected.
Turns the clock display ON/OFF.
Use this menu item to select 12 hour
clock mode or 24 hour clock mode.
Use this menu item to turn on or off the
beep sound.
Use this menu item to set or make
changes to the time displayed on the
clock after selecting this menu item,
1.
to select
hour or minute.
2.
press the or button
on the remote control, you can adjust the
hour or minute.
Press
◄► ▲/▼
the on the
or
Press
◄► ▲/▼
the on the
or
the / button on the front
panel or press the / , / or
button on the remote control
Rotate volume knob front
panel
the / button on the head
unit or press the / , / or
button on the remote control
Rotate volume knob front
panel
Clock
AM10:06
System
TIME.M 12
Setup
Hour Minute
BEEP ON
PICTURE
DEFAULT
BRI 32
CON 32
COL 32
TINT 32
Clock
AM10:06
System
TIME.M 12
Setup
MENU
Hour Minute
BEEP ON
AV menu settings
AV Menu Overwiew
MENU
MENU
ENTER
VOL+ VOL-
MODE
MENU
You can adjust various settings of the unit
from the AV menu.
The AV menu contains the menu items
and submenus shown in the figure below:
1. Press the button on the front
panel or the remote control to activate AV
menu.
2. Press
◄► ▲/▼
to select a
menu item (SETUP, AUDIO PICTURE).
3. Press the button on the front
panel, or the button on the
remote control to access your selected
menu item.
4. the on the
or press the or button
on the remote control to adjust the item
you have selected.
5. Repeat steps 2 ,3 and 4 to adjust other
items if necessary.
6. Press the button on the front
panel or remote control to return to the
previous menu.
7. Press the button on the front
panel or the remote control to finish the
procedure.
，
the / button on the front
panel or press the / , / or
button on the remote control
Rotate volume knob front
panel
Page 11

Picture Menu
Bright:
Contrast:
Color:
Tint:
Default:
VOL+ VOL-
MENU
ENTER
1. the / button on the
or press the / , / or
button on the remote control
Rotate volume knob front
panel
the item
you have selected.
0 ~ 63; Adjust this setting if the
picture is too bright or too dark.
0 ~ 63; Use this setting to
adjust the contrast of the picture.
0 ~ 63; Use this setting to adjust
the color of the picture.
0 ~ 63; Use this setting to adjust the
tint to make colors appear most natural.
(Not available)
Using this setting to make the
picture menu setup restore to factory
status.
After selecting this menu item, rotate
volume knob front panel r press
the or button on the remote
control to move the cursor to “DEFAULT”,
then press the button on the head
unit or button on the remote
control to make the picture setup restore
to factory default setup.
Press front
panel ◄ ► ▲/▼
the on the
or press the or button
on the remote control to adjust
the
on the o
VOL+ VOL-
to select a
menu item.
2.
PICTURE
DEFAULT
BRI 32
CON 32
COL 32
TINT 32
Audio Menu
Volume level:
Bass level:
Treble level:
Balance:
Fader:
Equalization:
Loudness:
Sub-woofer:
1. the / button on the
or press the / , / or
button on the remote control
Rotate volume knob front
panel
the item
you have selected.
00~63;
-7 ~0~ +7;
-7 ~0~ +7;
L15 ~L.R~R15; This setting
adjust the balance between the left and
right speakers.
15R ~ R.F~15F; This setting
adjust the balance between the front and
rear speakers.
FLAT, ROCK, POP, JAZZ,
CLAS(Classic); You can select a preset
equalizer settings. You can also set a
custom equalizer mode.
on/off; Loudness introduces
a special low- and high-frequency
emphasis at low listening levels.
on/off; This unit is equipped
with a sub-woofer output. If you connect
this output to a powered sub-woofer or
amplifier & sub-woofer system, enable
this output by select ON.
Press front
panel ◄ ► ▲/▼
the on the
or press the or button
on the remote control to adjust
VOL+ VOL-
to select a
menu item.
2.
Page 12

Disc operations
Loading/Removing a Disc
1. Press the ( ) button on the front
panel to fold down the front panel and then
insert a disc into the disc slot with the label
side facing upward; the front panel will be
closed, the player will play the disc auto-
matically.
2. Press the ( ) button then press
the ( ) button to eject the loaded
disc.
Press the button on the front panel
or remote control to access the source
selecting interface, then press the or
button on the front panel or the or
button on the remote control to select the
mode.
Press the button to display the
following screen.
Open
Open ,
EJECT
MODE
DISP
To select the disc mode
◄►
disc
Disc Information Screens
When you insert a disc, a screen with
information similar to the one below will
appear when you press and hold the
button.
When you insert a CD, MP3, WMA, JPEG,
or MPEG4 disc, the following screen
appears.
SUB-T
[MP3] DANZA.MP3
Information display
Folders list
Files list
Files type
For MP3/JPEG/MPEG4:
Use the cursor button ( ) to select
a file or folder, then press the button
to confirm your selection.
If you select a file, it will be played. If you
select a folder its contents(files) will be
displayed in the file list.
For CD:
Press the or button on the front panel
or remote control to skip to the next or
previous track.
Press and hold the or button on the
front panel repeatedly or press the or
button on the remote control to fast forward
or fast reverse with different speed as
follows:
2X 4X 8X 20X PLAY
2X 4X 8X 20X PLAY
In fast forward or fast reverse mode, press
the button on the head unit or remote
control to return to normal playback.
Press the button on the front panel or
remote control to pause disc playback.
Press it again to resume playback.
Press the button on the front panel or
remote control once to stop playback.
Press the button to resume playback.
Press the button twice and then press
the button to stop playback and return to
the first track on the disc.
Use this function when you wish to repeat a
whole disc, a track or a directory on the
disc.
1. Press the button on the head unit or
remote control repeatedly to select the
different repeat modes.
2. For different kinds of disc, pressing the
button has different effects.
ENTER
FORWARD:
BACKWARD:
RPT
RPT
Single Track Selection
Fast Forward / Fast Reverse
Pause Playback
Stopping Playback
Repeat Playback
▲/▼/◄/►
Artist & Song
Title (MP3 only)
Clock
Source
Status Playing time
Track number
Page 13
DISC

For CD/VCD/SVCD:
For MP3:
For disc:
REP 1:
REP DIR:
REP CHAPTER:
REP TITLE:
REP ALL:
REP OFF:
A-B
A-B
A-B
RDM
(Intro scan)
INT
REP 1 REP ALL REP OFF
REP 1 REP DIR REP ALL REP OFF
REP CHAPTER REP TITILE REP OFF
Note:
Only one track(file) is repeated.
A single folder of tracks(files) is
repeated.
A chapter is repeated.
A titel is repeated.
An entire disc is repeated.
Normal playback mode.
Note: The repeat feature is not supported
for VCD 2.0 discs when PBC(Playback
Control) is on.
A-B repeat allows you to specify a
paragraph of the current track to be
repeated.
1. Press the button to set the starting
point of the section you wish to repeat.
“REPEAT A-” will be visible on the screen.
2. Press the button to set the end point
of section you wish to repeat. “REPEAT A-
B” will be visible on the screen.
The unit will repeat the section of the
current track you’ve just chosen from point
“A” to “B”. To return to normal playback,
press the button again. “ A-B CANCEL”
will be visible on the screen.
Press the button on the head unit or
remote control to switch the random mode
ON/OFF. In random mode, tracks(files) on
the disc will be played in random order.
(only for
CD/VCD)
Press the button on the front panel to
play the first 10 seconds of each track on
the current disc. Press it again to stop intro
scan and return to normal playback.
A-B Repeat (Paragraph repeat mode)
Playing in Random order
Previewing all tracks
Disc Menu Operations
Multi-subtitle Language Function
Multi-Audio Language
Menu-driven playback is possible while
playing a disc with menu-driven features or
when playing a VCD with PBC(Playback
Control).
1. Press the button, a title list or
disc menu will appear on the screen.
2. Use cursor button ( ) to select
a item on the menu you wish to play, then
press the button to confirm your
selection. (Note: On some disc, you can
select the items with the numeric button.)
Some discs have multiple languages,
allowing you to select the subtitle language
recorded on disc.
Press the button to switch between
the different languages recorded on the
disc.
- Not all discs will allow changing the
subtitle during playback. In these cases,
select the desired subtitle language from
the Disc’s menu.
- There may be delay before the selected
subtitle language appears.
- For some discs, the subtitles will be
displayed even when this is set to off.
- The number of available languages varies
from disc to disc.
For discs which have multiple language
soundtracks, you can press the
button to switch between the audio
languages recorded on the disc.
- The number of available languages varies
from disc to disc.
- Some discs only contain one soundtrack
language.
- Not all discs will allow changing the audio
language during playback. In these cases,
select audio language from the Disc’s
menu.
Some VCD/SVCD discs which have multiple
TITLE/PBC
ENTER
For Disc:
SUB-T
Notes:
For Disc:
AUDIO
Note:
For VCD/SVCD:
▲/▼/◄/►
Special disc operations
Page 14

audio channels, you can select the desired
audio channel to play by pressing the
button.
Left audio channel only.
Right audio channel only.
Mix mono audio (left/right).
Normal stereo (left / right)
playback.
Notes:
- some disc only contain one audio channel.
You can view the same scene at different
angles if the disc has been recorded with
multiple viewing angles.
Press the button during playback.
The following information will be shown:
This example indicates that you are
currently viewing the first of three available
camera angles. Press the button to
select a different angle.
- Some time may be required for the angle
to change.
- Depending on the disc, the viewing angle
may switch in one of two ways.
1. Seamless: The angle switches
smoothly.
2. Non-seamless: When the angle is
switched, a still picture is displayed first,
after which the angle switches.
- The number of available viewing angles
varies from disc to disc.
- The function only works for discs having
scenes recorded at different angles.
Press the button repeatedly to
enlarge or reduce the size of image
according to the disc as follows:
ZOOM 2 ZOOM 3 ZOOM 4 ZOOM 1
/2 ZOOM1/3 ZOOM1/ 4 ZOOM
OFF
In zoom in mode, press the cursor button
( ) to move the zoomed-in area.
Press the button during playback to
activate the programing editing interface as
follows:
AUDIO
MONO L:
MONO R:
MIX MONO:
STEREO:
ANGLE
ANGLE
Notes:
ZOOM
PROG
Multi-angle Function
ZOOM Function
Programmed Play Function
▲/▼/◄/►
For VCD/SVCD/CD:
For Disc/MP3/MPEG4:
ENTER
SUB-T
For Disc Information:
For VCD/CD/MP3/JPEG:
1. Disc type
2. Playback information
TT 1/3:
CH1/1:
TRK9/18:
1)Usethecursorbutton( )to
select the item that you want to program.
The item you selected will be highlighted.
2) Input the track number that you want to
program using the numeric button (0~9) on
the remote control.
3) Press the cursor button ( ) to
move to “PLAY” operation button and then
press the button to program the
playback sequence.
Press and hold the button during
playback to display information of the
current disc on the screen:
Current title/ Total title;
Current Chapter/ Total Chapter;
Current Track/ Total Track.
On Screen Display
▲/▼/◄/►
▲/▼/◄/►
PROG
PLAY CLEAR
PROG
PLAY CLEAR
21 3
5
4 6
78 29
PBC
Page 15
DISC

3. Time indication
:
-:
T:
T-:
C:
C-:
4. Audio language or audio channel
indication
5. Subtitle language indication
6. View angle indication
7. Mute indication
8. PBC indication (only for VCD with
PBC)
9. Repeat playback indication
:
:
:
:
GOTO
- To search for a particular Title, Chapter,
or Track
ENTER
- To search for a particular point by
playing time
ENTER
Elapsed playing time of the disc;
Remaining time of the disc;
Elapsed playing time of the current
title;
Remaining time of the current title;
Elapsed playing time of the current
chapter;
Remaining time of the current chapter.
One track repeat playback;
One directory repeat playback;
The whole disc repeat playback;
Exit repeat playback mode;
Press the button, the screen will
display the following message.
For Disc:
For VCD/CD/MP3:
1. Use the cursor button ( ) to
highlight 1 (track number),2(chapter
number) or 4 (VCD track number).
2. Then enter a number with the number
button to input the desired Title/Chapter,
Track, then press the button to
confirm your selection.
1. Use the cursor button ( ) to
move to 3 (time).
2. Use the number buttons on the remote
control to input the elapsed playing time of
the current title or the disc, and then press
the button to confirm the selection.
GOTO Function
▲/▼/◄/►
▲/▼/◄/►
Using the number buttons
In Disc/VCD playing mode or in folder/file
1 2 3
3
PBC
4
[MP3] DANZA.MP3
Information display
Folders list
Files list
Files type
list display mode, press the number buttons
to select a title, a chapter, or a track, then
press the button to confirm your
selection.
ENTER
Using the menus
In Disc mode, press and hold the
buttonontheremotecontroltoaccess
Disc’s menu. Then you can find your
favorite program by entering the relevant
Disc’s menu.
Use the ◄/►/▲/▼ buttons on the remote
control to select a item on the menu you
wish to play, then press the button
to confirm your selection.
Note:
* Not all discs have Disc’s menu playing
features.
* For some disc, the content of TITLE and
MENU is same.
When you insert a data disc containing
audio (MP3), movie (MPEG4) or picture
(JPEG) files into the disc slot, the following
main menu will appear:
Press the button on the remote
control to switch to the following interface:
Use the cursor button ( ) to select
the required file type (Music , Picture
or Movie ) or a folder / file on the screen
you wish to play, then press the
MENU
ENTER
DISP
ENTER
▲/▼/◄/►
Data disc operations
Artist & Song
Title (MP3 only)
Clock
Source
Status Playing time
Track number
Page 16
DISC

button to confirm your selection.
In the viewing of picture or playing movie,
press the ( ) button to return to the
main menu.
This disc player features a front panel USB
interface. A USB device can be connected
to this port. When you insert a USB stick
through the port, the Disc player will search
for the MP3/WMA files and start to play
them automatically.
If you insert a memory card into the memory
card slot or a disc into the disc slot while
reading the USB stick, the unit will play the
disc. Press button to access the
source interface, then press the / or
VOL VOL button on the head unit or
press the / , / or button on
the remote control to select to switch to
USB playback mode.
- Use the USB adaptor cable, if necessary.
- The operations of playing the MP3 file in
the USB is the same as the operations of
MP3/WMA disc.
- When reading the USB device, be sure
not to touch or remove it from the USB port.
- If following the instruction above, the unit
can't read the file in the USB device, please
check if the device is in good condition, or
take it out then insert it into the USB port
once more.
- This car Disc player can only support the
standard USB-memory device.
- USB MP3 player is not a standard which
means different brand name or different
models have their own standard. So this
product cannot support all MP3 players.
- When connecting an MP3 player and
there is a normal battery in the player (non
rechargeable battery), you should remove
the battery from the MP3 player then
connect it to the USB port. Otherwise, it
may cause battery burst.
STOP
Using the USB stick:
MODE
/
Note:
▲▼
◄► ▲/▼
Playback type icons:
AUDIO Playback mode (default)
JPG Playback mode (default)
MOVIE Playback mode (default)
USB operations
Using the memory card:
MODE
/
Note:
MODE
/
This disc player features a memory card
slot. When you insert a memory card into
the memory card slot, the disc player will
read the memory card automatically.
If you insert a USB stick into the USB port or
a disc into the disc slot while reading the
memory card, the unit will play the file in the
USB or track on the disc.
Press button to access the source
interface, then press the / or VOL
VOL button on the head unit or press the
/ , / or button on the remote
control to select to switch to
reading mode.
The operations of the memory card
playback is the same with the CD / MP3 /
WMA disc operations described above.
- The operations of the MP3 file in the
memory card is the same as the operations
of MP3 disc.
- When reading the memory card, be sure
not to touch or remove the memory card
from the card slot.
- If following the instruction above, the unit
can't read the card, please check if the card
is in good condition, or take out the card
then insert it into the card slot once more.
This car disc player is equipped with a
Audio / Video auxiliary input jack on the
front panel, so you can connect a video
game, digital camera/camcorder or other
device you wish to use in this car disc payer.
To connect a video device to the auxiliary
A/V input jack by using an AV input cable,
Then ress the button to access the
source interface, then press the / or
VOL VOL button on the or
press the / , / or button on
the remote control to select AV IN mode.
▲
▼
◄► ▲/▼
▲ ▼ head unit
◄► ▲/▼
memory card
memory
AV input operations
Memory card operations
Page 17

BT hands-free function
When link up your mobile phone to this BT
hands-free system, you can dial or receive
calls via this BT device during driving.
You can also transmit the audio data(music)
from a mobile phone to the car radio via this
BT device.
Sound and picture will be automatically off
when there is an in-coming call. Voice
comes out from your car speakers and the
built-in microphone receives your voice.
(See the menu of the hands-free system).
Before you use BT free-hands system,
between this BT free-hands system and
your BT mobile phone must be connected
with each other. This process is called
“Pairing”.
1.Turn your BT mobile phone on and
activate pairing mode. Now your BT mobile
phone searches for BT devices in the
reception range. When mobile phone detect
the hands-free sytem, the “CAR BT”(name
of the free-hands system) will appear on the
screen of the mobile phone.
2. Once the BT free-hands was found,
please enter the pairing code “0000” to
connect both devices with each other.
When you switch the car disc player into
standby mode, then turn it on again, the BT
module can establish BT connection
automatically
If connecting success, “CON OK”,
“CONNTED” will be visible on the LCD
display, and the “BT” will twinkle
continuously on the LCD display.
Otherwise, it will appear “CONT DOWN”,
“NO CONT” on the LCD display. Meanwhile,
the “BT” will not twinkle continuously on the
LCD display.
You have to active automatic call
reception so that the mobile phone
accepts incoming calls automatically
In many countries, this is a prerequisite
for legal operation of hands-free
equipment while driving.
1. Pairing
2. CONNECT
.
3. DIAL CALL
0~9 , #
*
+
DEL
4. Caller ID
5. Accepting an incoming call
6.Rejecting an incoming call
7. Terminating a call
8. Call Transfer
9. BT MENU
BT MENU
PRESET
RECEIVE
DIALED
3.1 Dial with the mobile phone directly.
3.2 Dial with the remote controller.
3.2.1 After connecting, press the “ ” or
push button on the remote control to enter
telephone number .
- Pressing and holding the button on the
remote control when you want to input “ + ”.
- Simultaneously, the entered number will
be appeared on the touch screen.
- If a number is wrongly input, press the
button on the remote control to delete
the incorrect number.
3.2.2 Press the “ ” button on the front
panel or remote control to dial.
When a ring comes, the caller’s numbers
will be shown on the touch screen, you can
decide whether or not to answer, so you
avoid unnecessary trouble and disturb.
If the automatic call accept function is not
activated,when a ring comes, press the “ ”
button on the front panel or remote control
to switch on the calling.
When a ring comes, press the “ ” button
on the head unit or remote control to reject
the coming call.
During a phone call, press the “ ” button
on the front panel or remote control to hang
up the current call.
During a phone call, you can transfer the
call to your mobile phone or the hands-free
system by pressing the “ ” button on the
front panel or remote control.
At connect status, press the
button on the remote control to enter
BT menu. The structure of the BT menu as
follows:
(Preset phone number) :
List of saved phone number, you can save 6
phone numbers total.
(Received phone number):
List of the latest 6 received calls.
(Dialed phone number):
Page 18