Bradford White M2XR75S Series User manual

Residential Atmospheric Vent Extra Recovery
Energy Saver Gas Water Heater
The Extra Recovery FVIR Defender Safety System®Models Feature:
■Advanced ScreenLok®Technology Flame Arrestor Design—Flame
arrestor is designed to prevent ignition of flammable vapor outside of the water
heater.
■Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of
the combustion chamber or restricted air flow.
■Piezo Igniter—Easy and quick lighting of the pilot burner by push button.
■Pedestal Base—Rugged and durable base allows easy transport, positioning
and provides corrosion resistant contact with floor.
■Maintenance Free—No regular cleaning of air inlet openings or flame arrestor
is required under normal conditions.
■Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
■Factory Installed Hydrojet®Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank. Increases
first hour deliveryof hot water while minimizing temperaturebuild up in tank.
■Vitraglas®Lining—BradfordWhite water heater tanks areprotected from the
corrosive effects of hot water by an exclusive ceramic porcelain-like coating.
The BradfordWhite high silica Vitraglas®lining provides a tough interior surface
for our hot water tanks.
■Fully Automatic Controls—Built-in energy cut-offswitch prevents
abnormally high water temperature for extra safety. Built-in gas pressure
regulation.
■Side Connections—3/4" NPT tappings allow easy connections for space
heating applications (potable water only).
■2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity (M-1-XR403 has 1").
■Water Connections—3⁄4" NPT factoryinstalled true dielectric fittings extend
water heater life and eases installation.
■Factory Installed Heat Traps—Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation.
■Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
■3x4 “Snap Lock” Draft Diverter—Allows either 3" or 4" vent connections
with inputs of 40,000 BTU/Hr.or less. Over 40,000 BTU/Hr. has the 4" “Snap
Lock” Draft Diverter.
■Flue Baffle—Maximizes the amount of heat absorbed by the tank and
reduces heat loss during standby periods.
■Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
■T&P Relief Valve—Included.
■Brass Drain Valve.
■Design Certified by CSA International (formerly AGA/CGA).
6 or 10-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
Photo is of
M-2-XR65T6FBN
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Defender Safety System®,ScreenLok®,Vitraglas®and Hydrojet®are registered trademarks of Bradford White®Corporation.
109-B-0808-A

NATURAL GAS AND LIQUID PROPANE GAS
Extra Recovery Energy Saver Models
Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
79% and 80% Recovery Efficiency
Model
Number
Approx.
Shipping
Weight
lbs.
E
Floor to
Gas
Conn.
in.
A
Floor to
Flue
Conn.
in.
B
Jacket
Dia.
in.
U.S.
Gal.
Capacity Recovery*
90°F Rise
M-1-XR403S6FBN
M-2-XR504T6FBN
M-2-XR65T6FBN
40
48
65
Imp.
Gal.
33
40
54
Nat.
BTU/Hr.
Input
40,000
65,000
65,000
Nat.
U.S.
GPH
43
69
69
Nat.
Imp.
GPH
36
57
57
LP
U.S.
GPH
40
65
67
LP
Imp.
GPH
33
54
56
126
164
205
20
22
24
C
Vent
Size
in.
3x4
4
4
50
59
1
/ 4
63
13
13
12
3
/ 16
48
1
/ 2
57
60
3
/ 4
41
50
53
1
/ 2
H
Floor to
Water
Conn.
in.
D
Floor to
T&P
Conn.
in.
Model
Number
Approx.
Shipping
Weight
kg.
E
Floor to
Gas
Conn.
mm.
A
Floor to
Flue
Conn.
mm.
B
Jacket
Dia.
mm.
Liters
Capacity Recovery*
50°C Rise
M-1-XR403S6FBN
M-2-XR504T6FBN
M-2-XR65T6FBN
151
182
246
Nat.
kW
Input
11.7
19.1
19.1
LP
BTU/Hr.
Input
38,000
61,000
63,000
LP
kW
Input
11.1
19.1
18.5
Nat.
Liters/
Hour
163
261
261
LP
Liters/
Hour
151
246
253
57
74
93
508
559
609
C
Vent
Size
mm.
76 / 102
102
102
1270
1505
1600
330
330
309
F
Floor to
Space
Heating
Return
in.
13
1
/ 2
13
1
/ 2
13
1
/ 2
F
Floor to
Space
Heating
Return
mm.
343
343
342
G
Floor to
Space
Heating
Outlet
in.
41
50
53
1
/ 2
G
Floor to
Space
Heating
Outlet
mm.
1041
1270
1359
1232
1448
1543
1041
1270
1359
H
Floor to
Water
Conn.
mm.
24
26
28
K
Depth
in.
609
660
711
K
Depth
mm.
D
Floor to
T&P
Conn.
mm.
Residential Atmospheric Vent Gas Water Heater
Meets NAECA Requirements
General
All gas water heaters are certified at 300 PSI (2068 kPa) test pressure and 150 PSI (1034 kPa) working pressure. All water connections are 3⁄4" (19mm) NPT.
All gas connections are 1⁄2" (13mm).
All models design certified by CSA International (formerly AGA/CGA), ANSI Z-21.10.1 and/or peak performance rated.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing
heating system or component(s) previously used with a non-potable water heating appliance.
Propane models feature a Titanium Stainless Steel propane burner. For Propane (LP) models change suffix "BN" to "SX".
M-2-XR65 features a Cast Iron burner. For Propane (LP) model change suffix "BN" to"CX".
For 10 year models, change suffix from “6” to “10”.
*Based on manufacturers rated recovery efficiency.
E
C
**
B
AH
K
D&G
F
E
C
**
B
AH
K
D&G
F
**M-1-XR403S water connections are on 8" centers, all other models are 11" centers.
Printed in U.S.A.
109-B-0808-A
©2008, Bradford White Corporation. All rights reserved.
Ambler,PA
For U.S. and Canada field service, contact your professional installer or local BradfordWhite sales representative.
Sales 800-523-2931 ●Fax [phone] / Technical Support800-334-3393 ●Fax [phone] ●Warranty 800-531-2111 ●Fax [phone]
International: Telephone [phone] ●Telefax 215-641-9750 / www.bradfordwhite.com
Sales / Technical Support866-690-0961 /905-238-0100 ●Fax [phone] /www.bradfordwhite.com