Brandson Equipment 305695 User manual

Garagentoröner
Mod.-Nr.: 305695
User Manual
- EQUIPMENT -
https://downloads.ganzeinfach.de/

2
Table of contents
1. Deutsch ............................................................................................................... 3
2. English ................................................................................................................. 8
3. Français ............................................................................................................. 13
4. Italiano .............................................................................................................. 18
5. Español.............................................................................................................. 23

3Deutsch
Vielen Dank, dass Sie sich für ein Produkt von Brandson entschieden haben.
Damit Sie auch lange Freude mit Ihrem erworbenen Gerät haben werden, lesen
Sie sich bie die nachfolgende Kurzanleitung aufmerksam durch.
1. Lieferumfang
• Garagentoröner
• Kurzanleitung
• 1x 12V A27 / LR27A
2. Technische Daten
Spannungsversorgung 1x 12V A27
Frequenz 433,92 MHz
max. Sendeleistung -19,51 dBm
Baerietyp LR27A, 12V
Arbeitstemperatur -20°C bis +60°C
Reichweite • ca. 50-80 m im freien, ohne Hindernisse
• ca. 10-15 m im Auto
Kompabel mit
• EcoStar RSC 2
• EcoStar RSE 2
• EcoStar RSZ 1

4Deutsch
3. Produkt-Details
Vorderseite
Rückseite
Status-LED
Baeriefachschrauben
Bedientasten
+
Baeriefach

5Deutsch
4. Codes anlernen
1. Drücken Sie kurz die „P-Taste (Lerntaste/Codetaste)“ am Torantrieb. Die
LED am Antrieb beginnt zu blinken.
2. Drücken Sie kurz die gewünschte Handsendertaste auf der Brandson
Fernbedienung. Innerhalb der nächsten 10 Sekunden bie die Taste erneut
betägen. Nun fängt die LED am Antrieb an, schnell zu blinken und erlischt
alsbald.
3. Lassen Sie sodann die Handsendertaste los. Die LED am Antrieb leuchtet
konstant und der Handsender ist angelernt.
5. Baeriewechsel
Schrauben Sie die Hinterseite des Gerätes mit einem geeigneten Schraubendreher
ab. Entnehmen Sie die leere Baerie und setzen Sie eine 12V A27 Baerie ein.
Achten Sie in jedem Fall auf die korrekte Polarität der Baerie.
6. Sicherheitshinweise und Haungsausschluss
Versuchen Sie nie das Gerät zu önen um Reparaturen oder Umbauten
vorzu n ehmen. Schließen Sie das Produkt nicht kurz. Das Gerät ist nicht für den
Betrieb im Freien zugelassen, verwenden Sie es nur im Trockenen. Schützen Sie es
vor hoher Lufeuchgkeit, Wasser und Schnee. Halten Sie das Gerät von hohen
Temperaturen fern. Setzen Sie das Gerät keinen plötzlichen Temperaturwechseln
oder starken Vibraonen aus, da dies die Elektronikteile beschädigen könnte.
Prüfen Sie vor der Verwendung das Gerät auf Beschädigungen.
Das Gerät sollte nicht benutzt werden, wenn es einen Stoß abbekommen hat oder in
sonsger Form beschädigt wurde. Beachten Sie bie die naonalen Besmmungen
und Beschränkungen.Nutzen Sie das Gerät nicht für andere Zwecke als die, die in
der Anleitung be schrieben sind. Dieses Produkt ist kein Spielzeug. Bewahren Sie
es außerhalb der Reichweite von Kindern oder geisg beeinträchgten Personen
auf. Jede Reparatur oder Veränderung am Gerät, die nicht vom ursprünglichen
Lieferanten durchgeführt wird, führt zum Erlöschen der Gewährleistungs- bzw.
Garaneansprüche.Das Gerät darf nur von Personen benutzt werden, die diese
Anleitung gelesen und verstanden haben. Die Gerätespezikaonen können sich
ändern, ohne dass vorher gesondert darauf hingewiesen wurde.

6Deutsch
7. Entsorgungshinweise
Elektrische und elektronische Geräte dürfen nach der europäischen WEEE
Richtlinie nicht mit dem Hausmüll entsorgt werden. Deren Bestandteile müssen
getrennt der Wiederverwertung oder Entsorgung zugeführt werden, weil
giige und gefährliche Bestandteile bei unsachgemäßer Entsorgung die Umwelt
nachhalg schädigen können.
Sie sind als Verbraucher nach dem Elektro- und Elektronikgerätegesetz (ElektroG)
verpichtet, elektrische und elektronische Geräte am Ende ihrer Lebensdauer
an den Hersteller, die Verkaufsstelle oder an dafür eingerichtete, öentliche
Sammelstellen kostenlos zurückgeben. Einzelheiten dazu regelt das jeweilige
Landesrecht. Das Symbol auf dem Produkt, der Betriebsanleitung oder/und der
Verpackung weist auf diese Besmmungen hin. Mit dieser Art der Storennung,
Verwertung und Entsorgung von Altgeräten leisten Sie einen wichgen Beitrag zum
Schutz unserer Umwelt.
8. Hinweise zur Baerieentsorgung
Im Zusammenhang mit dem Vertrieb von Baerien oder mit der Lieferung von
Geräten, die Baerien enthalten, ist der Anbieter verpichtet, den Kunden auf
folgendes hinzuweisen:
Der Kunde ist zur Rückgabe gebrauchter Baerien als Endnutzer gesetzlich ver-
pich tet. Er kann Altbaerien, die der Anbieter als Neubaerien im Sorment
führt oder geführt hat, unentgeltlich am Versandlager (Versandadresse) des An-
bie ters zurückgeben. Die auf den Baerien abgebildeten Symbole haben folgende
Bedeutung: Pb = Baerie enthält mehr als 0,004 Masseprozent Blei, Cd = Baerie
enthält mehr als 0,002 Masseprozent Cadmium, Hg = Baerie enthält mehr als
0,0005 Masseprozent Quecksilber.

7Deutsch
Hiermit erklärt die Firma WD Plus GmbH, dass sich das Gerät 305695 in Übereinsmmung
mit den grundlegenden Anforderungen und den übrigen einschlägigen Besmmungen der
Richtlinie 2014/53/EU bendet. Eine vollständige Konformitätserklärung erhalten Sie unter:
WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover; hp://downloads.ganzeinfach.de/
search/model/305695
WEEE Richtlinie: 2012/19/EU
WEEE Register-Nr: DE 67896761
Das Symbol der durchgekreuzten Mülltonne bedeutet, dass
die Baerie nicht in den Hausmüll gegeben werden darf.

8English
Thank you for choosing an Brandson product. Please read the following user man-
ual carefully so as to get the most from the product you have purchased.
1. Scope of delivery
• Garage door opener
• User manual
• 1x 12V A27 / LR27A
2. Technical data
Power supply One 12V A27
Frequency 433.92 MHz
Max. transmission power -19.51 dBm
Baery type LR27A, 12 V
Operang temperature -20°C to +60°C
Range • about 50-80 meters in open, without obstacles
• about 10-15 meters in the car
Compable with
• EcoStar RSC 2
• EcoStar RSE 2
• EcoStar RSZ 1

9English
3. Product details
Front side
Back side
Status LED
Baery compartment screws
Operang buons
+
Baery compartment

10 English
4. Programming codes
1. Briey press the "P buon (program buon/code buon)" on the door
drive. The LED on the drive starts ashing.
2. Briey press the desired hand-held transmier buon on the Brandson
remote control. Please press the buon again within the next 10 seconds.
Now the LED on the drive starts ashing quickly and soon goes o.
3. Then release the hand-held transmier buon. The LED on the drive glows
connuously and the hand-held transmier is programmed.
5. Replacing the baery
Unscrew the back of the device using a suitable screwdriver. Remove the empty
baery and replace it with a 12V A27 baery. Always pay aenon to the correct
polarity of the baery.
6. Safety instrucons and disclaimer
Never try to open the device to carry out repairs or modicaons. Do not short-
circuit the product. The device is not approved for outdoor use. Therefore please
use it only in dry surroundings. Protect it from high humidity, water and snow. Keep
the product away from high temperatures. Do not expose the device to sudden
changes in temperature or heavy vibraons, as this could damage the electronic
components. Check the device for damage before using it. The product should not
be used if it was subject to impact or has been damaged in some other manner.
Please follow the naonal regulaons and restricons. Do not use the device for
purposes other than those described in the manual. This product is not a toy.
Keep it out of the reach of children or mentally disabled persons. Any repair or
modicaon to the device, which is not carried out by the original supplier, will
void the warranty or warranty claims. The device should only be used by those who
have read and understood this manual. The specicaons of the product may be
changed without any special prior nocaon.

11English
7. Disposal instrucons
In line with the European WEEE direcve, electrical and electronic products should
not be disposed of along with domesc waste. Their components have to be sent
separately for recycling or disposal, as improper disposal of toxic and dangerous
components may permanently damage the environment. According to the
electrical and electronic equipment act (ElektroG), you are obliged (as a consumer)
to return (free of charge) electrical and electronic devices to the manufacturer, the
point of sale or public collecon points at the end of their service life. The relevant
local laws regulate the details in this regard. The symbol displayed on the product,
in the user manual or/and on the packaging refers to these regulaons. With this
manner of sorng, recycling and disposal of used products, you make an important
contribuon towards protecng our environment.
8. Instrucons for baery disposal
In conjuncon with the sale of baeries along with the supply of devices that
include baeries, the supplier is obliged to point out the following to the
customer:The customer is legally obliged to return used baeries. He can return
used baeries which the supplier oers or has oered as new baeries in his
assortment free of charge to the supplier's dispatch warehouse (shipping address).
The symbols shown on the baeries indicate the following: Pb = baery contains
more than 0.004 percent lead by weight, Cd = baery contains more than 0.002
percent cadmium by weight, Hg = baery contains more than 0.0005 percent
mercury by weight.

12 English
The company WD Plus GmbH hereby ceres that the device 305695 complies with the fun-
damental requirements and all other relevant spulaons of the direcve 2014/53/EU. A
complete conformity statement can be obtained from: WD Plus GmbH, Wohlenbergstraße 16,
30179 Hannover; hp://downloads.ganzeinfach.de/search/model/305695
WEEE direcve: 2012/19/EU
WEEE Register no.: DE 67896761
The symbol of the crossed-out dustbin means that the
baery should not be disposed of in household waste.

13Français
Nous vous remercions d'avoir choisi un produit d'Brandson. Pour que vous
puissiez proter longtemps de votre appareil acquis, veuillez lire aenvement le
mode d'emploi suivant.
1. Contenu de la livraison
• Télécommande de porte de garage
• Mode d’emploi
• 1x A27 / LR27A 12V
2. Caractérisques techniques
Alimentaon électrique 1x A27 12V
Fréquence 433,92 MHz
Puissance d'émission max. -19,51 dBm
Type de baerie LR27A, 12 V
Température de foncon-
nement
-20°C à +60°C
Portée • env. 50-80 m en extérieur, sans obstacles
• env. 10-15 m dans la voiture
Compable avec
• EcoStar RSC 2
• EcoStar RSE 2
• EcoStar RSZ 1

14 Français
3. Parcularités du produit
Recto
Verso
LED d'état
Vis de comparment à piles
Touches de commande
+
Comparment à piles

15Français
4. Apprendre les codes
1. Appuyez brièvement sur la « touche P (touche d’apprenssage/touche de
code) » sur l’entraînement de porte. La LED sur l’entraînement commence
clignoter.
2. Appuyez brièvement sur la touche d'émeeur portaf souhaitée sur la télé-
commande de Brandson. Veuillez aconner la touche de nouveau dans les
10 secondes suivantes. La LED sur l’entraînement commence maintenant à
clignoter rapidement et s'éteint peut après.
3. Relâchez alors la touche d'émeeur portaf. La LED sur l’entraînement est
allumée en connu et l'émeeur portaf est appris.
5. Changement de baeries
Dévissez la face arrière de l’appareil avec un tournevis approprié. Rerez la pile
vide et insérez une nouvelle pile A27 12 V dans le comparment à piles.
Veillez toujours à la polarité correcte de la baerie.
6. Consignes de sécurité et clause de non responsabilité
N’essayez jamais d’ouvrir l’appareil an de réaliser des réparaons ou des
transformaons. Ne court-circuitez pas le produit. L'appareil n'est pas autorisé pour
l'ulisaon en extérieur, ulisez-le uniquement au sec. Protégez-le d'une humidité
élevée, de l'eau et de la neige. Maintenez l'appareil éloigné de températures
élevées. N'exposez pas l'appareil à des changements de température brusques ou
de fortes vibraons suscepbles d'endommager les pièces électroniques. Avant
d'uliser l'appareil, vériez qu'il ne présente pas de dommages.
L'appareil ne doit pas être ulisé s'il a reçu un coup ou a été autrement endommagé.
Veuillez respecter les disposions et restricons naonales. N'ulisez pas l’appareil
à d'autres ns que celles décrites dans le mode d'emploi. Ce produit n'est pas un
jouet. Maintenez-le hors de la portée des enfants ou des personnes handicapées
sur le plan mental. Toute réparaon ou modicaon qui n'est pas eectuée par
le fournisseur inial mène à l'annulaon de la garane. L’appareil ne doit être
ulisé que par des personnes ayant lu et compris ce manuel. Les spécicaons de
l'appareil peuvent être modiées sans indicaon préalable.

16 Français
7. Informaons sur la mise au rebut de vos appareils
Les appareils électriques et électroniques ne doivent pas, selon la direcve
européenne DEEE, être jetés dans les ordures ménagères. Leurs composants
devront être éliminés ou recyclés séparément, car des composants toxiques ou
dangereux pourraient causer des dommages durables à l'environnement en cas
d'éliminaon incorrecte.
En tant que consommateur vous êtes obligé, en vertu de la loi allemande sur les
équipements électriques et électroniques (ElektroG), de retourner gratuitement
les appareils électriques et électroniques à la n de leur durée de vie soit au
fabricant, soit au point de vente, soit dans des points de collecte publique prévus
à cet eet. Les détails sont régis par le droit naonal correspondant. Le symbole
sur le produit, le mode d'emploi et / ou l'emballage indique ces disposions. Avec
la séparaon de maères, le recyclage et l'éliminaon d'appareils usagés, vous
apportez une contribuon importante à la protecon de l'environnement.
8. Indicaons pour l'éliminaon des baeries
En relaon avec la vente de baeries ou de la livraison d'appareils contenants des
baeries, le fournisseur est obligé d'informer le client sur les points suivants :
Le Client est légalement tenu, en tant qu'ulisateur nal, de restuer les baeries
usagées. Il peut restuer gratuitement à l'entrepôt d'expédion (adresse
d'expédion) du fournisseur des baeries usagées que le fournisseur ore ou a
oert comme piles neuves dans son assorment. Les symboles gurant sur les
baeries ont les signicaons suivantes : Pb = la baerie conent plus de 0,004 %
en poids de plomb, Cd = la baerie conent plus de 0,002 % en poids de cadmium,
Hg = la baerie conent plus de 0,0005 % en poids de mercure.

17Français
Par la présente, WD Plus GmbH déclare que l'appareil 305695 est conforme aux exigences
essenelles et autres disposions pernentes de la direcve 2014/53/UE. Pour obtenir une
déclaraon de conformité complète, adressez-vous à : WD Plus GmbH, Wohlenbergstraße 16,
30179 Hanovre ; hp://downloads.ganzeinfach.de/search/model/305695
Direcve DEEE : 2012/19/UE
Numéro de registre DEEE : DE 67896761
Le symbole de la poubelle barrée signie que la pile ne doit
pas être éliminée avec les ordures ménagères.

18 Italiano
Grazie per aver scelto un prodoo di Brandson. Per ulizzare con soddisfazione
l'apparecchio acquistato, si prega di leggere aentamente le seguen istruzioni
per l’uso.
1. Contenuto della confezione
• Apriporta garage
• Istruzioni per l'uso
• 1x 12V A27 / LR27A
2. Da tecnici
Alimentazione di tensione 1x 12V A27
Frequenza 433,92 MHz
max. potenza di trasmis-
sione
-19,51 dBm
Tipo di baeria LR27A, 12V
Temperatura d'esercizio da -20 °C a +60°C
Portata • ca. 50-80 m all'aperto senza ostacoli
• ca. 10-15 m in macchina
Compabile con
• EcoStar RSC 2
• EcoStar RSE 2
• EcoStar RSZ 1

19Italiano
3. Deagli del prodoo
Parte anteriore
Parte posteriore
LED di
stato
Vi del vano baerie
Tas di comando
+
Vano baerie

20 Italiano
4. Sintonizzazione codici
1. Premere brevemente il "tasto P" (tasto di apprendimento/tasto codice)
sull'azionamento della porta. L'indicatore a LED sull'azionamento inizia a
lampeggiare.
2. Premere brevemente il tasto del trasmetore manuale desiderato sul
telecomando Brandson. Premere nuovamente il tasto entro 10 secondi.
L'indicatore a LED sull'azionamento inizia a lampeggiare velocemente e poi
si spegne.
3. Quindi, rilasciare il tasto del trasmetore manuale. L'indicatore a LED
sull'azionamento rimane acceso sso e il trasmetore manuale è sinto-
nizzato.
5. Sostuzione delle baerie
Svitare il lato posteriore dell'apparecchio con un cacciavite adao. Rimuovere la
baeria esaurita e inserire una nuova baeria A27 da 12V. Prestare in ogni caso
aenzione alla correa polarità della baeria.
6. Avvertenze di sicurezza ed esclusione della responsabilità
Non tentare mai di aprire l'apparecchio per eeuare riparazioni o trasformazioni.
Non cortocircuitare il prodoo. L'apparecchio non può essere usato all'aperto,
ulizzarlo solo in luoghi asciu. Proteggerlo da elevata umidità dell'aria, acqua
e neve. In ogni caso, tenere l'apparecchio lontano da elevate temperature. Non
esporre l'apparecchio a improvvisi sbalzi termici o for vibrazioni in quanto
potrebbero danneggiarsi le par eleroniche. Prima dell'uso, vericare la presenza
di danneggiamen all'apparecchio.
Non ulizzare l'apparecchio se ha subito un urto o è stato danneggiato in un altro
modo. Rispeare le disposizioni e limitazioni nazionali. Ulizzare l'apparecchio
unicamente per gli scopi descri nelle istruzioni. Questo prodoo non è un
giocaolo. Conservarlo fuori dalla portata di bambini o persone con capacità
mentali limitate. Qualsiasi riparazione o modica all'apparecchio non eseguita dal
fornitore originale comporta l'esnzione dei diri di garanzia. L'apparecchio può
essere ulizzato solo da persone che hanno leo e compreso le presen istruzioni.
Le speciche dell'apparecchio possono cambiare senza preavviso.
Table of contents
Languages:
Other Brandson Equipment Garage Door Opener manuals
Popular Garage Door Opener manuals by other brands

Real Carriage Door & Sliding Hardware
Real Carriage Door & Sliding Hardware Frankling Autoswing installation guide

Profelmnet
Profelmnet PEGASUS-1200 Installation & owner's manual

Beninca
Beninca BULL 5 OM manual

Automatic Technology
Automatic Technology GDO-2 SecuraLife owner's manual

Wayne-Dalton
Wayne-Dalton IDrive 3651-372 Installation instructions and owner's manual

SOMFY
SOMFY Dexxo Pro io installation manual