Breville Grind Control User manual

BDC650
the Grind Control™
Instruction Book - Manuel d’instructions
BDC650BSS_USC_IB_E20_FA.indd 2 24/1/20 9:41 am

8
KNOW YOUR BREVILLE PRODUCTKNOW YOUR BREVILLE PRODUCT
1. Bean Hopper Lid
2. 0.5lb Bean Hopper
3. Bean Hopper Locking System seals the
base of the bean hopper for easy removal
and transfer of coffee beans for storage.
4. Grind Adjustment Knob, adjusts
coarseness and/or fineness from one
of the 6 settings.
5. Cleaning Brush for cleaning of the
grinding burrs and coffee grinds chute.
6. Integrated Adjustable Burr Grinder
grinds whole beans just prior to brewing
for maximum flavor and aroma. Grinder
can be turned off when using pre-ground
coffee.
7. 12-Cup (60oz) Water Tank with
flip-top lid for convenient, front-access
filling. Grille prevents large debris from
entering the tank while the ‘MAX’ level
float rises when the tank is full.
8. Intuitive simple to operate Control
Panel with backlit LCD screen.
9. Coffee Grinds Chute delivers ground
coffee from the grinder to the coffee
basket.
10. Removable Grinds Catcher catches
loose grinds.
11. Carafe Lid.
12. 12-Cup Double-Wall, Stainless Steel
Thermal Carafe
13. Removable Gold Tone Filter
14. Soft Opening, Swing-Out Door with
safety interlock system prevents
operation if the coffee basket is not
correctly assembled or the door is not
properly closed.
15. Removable Coffee Basket lifts out for
easy filling and cleaning. Holds the
included gold tone filter or paper filters.
1
2
3
4
5
7
8
9
11
12
14
15
16
17
18
13
6
10
All parts of the
Grind Control™
that come into
contact with
coffee and water
are BPA Free.*
BDC650BSS_USC_IB_E20_FA.indd 8 24/1/20 9:41 am

9
KNOW YOUR BREVILLE PRODUCTKNOW YOUR BREVILLE PRODUCT
16. Steam Baffle diverts water overflow if
the coffee basket becomes blocked.
17. Brew Pause Drip Stop temporarily
ceases the flow of coffee when the
carafe is removed so a cup can be
poured mid-brew.
18. Drip Tray can be removed for direct
brewing into tall cups & travel mugs.
19. OPEN button. Press to open the
swing-out door.
20. MENU | EXIT button
Access the Menu to allow you:
- Set the clock.
- Adjust the Alert volumes.
- Reset the machine.
- Enter the Calibration Mode.
- Hold for 2 seconds to enter
standby mode.
21. CUP | CARAFE button. Press to brew
a single cup of coffee or a carafe.
22. STRENGTH button. Rotate to select
from one of the 8 strength settings, or
Pre-ground.
23. Auto Start button
Allows you turn the Auto Start feature
On & Off & adjust Auto Start time.
24. START | CANCEL button
Press to start or cancel the brew cycle.
AUTO
START
CUP CARAFE
START CANCEL
STRENGTH
OPEN
MENU
EXIT
19 24
20 21 23 23
BDC650BSS_USC_IB_E20_FA.indd 9 24/1/20 9:41 am

10
OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Unpack all parts and accessories before
removing and safely discarding all packaging
material and promotional labels. Ensure the
power cord is unplugged from the power outlet.
Wipe the exterior stainless steel housing with
a soft, damp cloth. Wash the bean hopper and
lid, coffee basket, gold tone filter and carafe in
warm, soapy water and a soft cloth. Do not use
abrasive cleansers, pads or cloths which can
scratch the surface. Rinse and dry thoroughly.
INITIAL SET UP
1. Install the Bean Hopper
Position the hopper onto the machine. Turn the
locking knob clockwise in the direction of the
LOCK arrow until it clicks. Fill the hopper with
fresh beans.
We recommend always keeping the hopper full
(0.5lb maximum) to ensure there are sufficient
beans. However, never over-pack the hopper
as this may result in the grinder jamming.
Replace the hopper lid.
NOTE
For easy removal, transfer and storage
of beans, the hopper can be removed
by turning the locking knob counter-
clockwise in the direction of the UNLOCK
arrow. If you have removed the hopper,
ensure it is securely reassembled back
onto the machine. The safety interlock
system will prevent operation if the
hopper is incorrectly assembled. The LCD
screen will flash ‘LOCK BEAN HOPPER’
until the issue is resolved.
FRESH IS BEST
To get the most out of your Grind Control™
coffee brewer we recommend using quality
freshly roasted whole bean coffee & grind right
before you brew. Coffee is at its peak flavor
potential 5-20 days after roasting. Always buy
coffee with a “Roasted On” date printed on
the bag and avoid buying coffee with a “Best
Before” or “Use By” date, as you never know
when it was roasted. Coffee loses flavor and its
aromatics once it’s ground, so grinding right
before you brew is the key to great tasting
coffee with superior flavor and aroma.
PRODUCT OVERVIEW
Your Grind Control™ coffee brewer is the first
drip coffee maker with an adjustable built-in
grinder and calibration mode.
The adjustable grinder features machined
stainless steel burrs that allow you to adjust
the coarseness or fineness to optimize flavor
balance.
The calibration mode allows you adjust the
amount of coffee delivered on any strength/
cup size setting to suit coffee of varying grind
size, origins, age and degree of roast, so you
can achieve the maximum flavor potential from
any coffee you choose.
The Grind Control™ also allows you to brew a
single cup or travel mug in “cup” mode or from
2 to 12 cups in “carafe” mode.
BDC650BSS_USC_IB_E20_FA.indd 10 24/1/20 9:41 am

11
OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT
2. Plugging in the Power Cord
Unwind the power cord completely and insert
the power plug into a grounded 110-120V
power outlet. The LCD screen will illuminate.
NOTE
The coffee machine will enter POWER
SAVE mode after remaining idle for
5 minutes. Press any button to exit
POWER SAVE mode and re-start the
machine. Hold Menu/Exit button for
2 seconds to enter standby mode.
3. Install the Coffee Basket
For best results, we recommend pre-heating
the coffee basket by running it under hot tap
water. Dry the coffee basket thoroughly, taking
particular care to completely dry the chute
area. Line the coffee basket with either the
provided gold tone filter or a paper filter.
Never use both at the same time.
a) Provided gold tone filter. When using
the gold tone filter, be sure that the
handle is positioned towards the hinge
area of the coffee basket. Otherwise the
handle may interfere with the flow of
ground coffee into the gold tone filter.
HANDLE TOWARDS
COFFEE BASKET HINGE
ENSURE CHUTE
AREA IS
COMPLETELY DRY
b) Paper filter Use an 8-12 cup, flat base
basket style paper filter with ~ 3¼"/8.25cm
base. Ensure that the paper filter is
completely open and touching the side
walls and bottom of the coffee basket.
Close the coffee basket lid. Press the OPEN
button to open the swing-out door.
Attach the coffee basket to the swing-out door
by ensuring the hinge area of the coffee basket
is firmly seated in its most downward position
on the two door hooks. Close the door until it
clicks shut.
CLICK
BDC650BSS_USC_IB_E20_FA.indd 11 24/1/20 9:41 am

12
OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT
USING THE GRIND CONTROL™
- CARAFE MODE
First Time Use Only
We recommend flushing the machine to
remove any dust particles or residue from the
manufacturing process. Follow the proceeding
instructions, ensuring to completely fill the
water tank. Step 1 (below) , select ‘12 CUPS’.
(Step 2, below) and the ‘PRE-GROUND’ coffee
setting. (Step 4, page 13). However do not
add any coffee to the coffee basket. Once
the cycle is complete, discard the water from
the carafe and repeat the cycle again for best
results. The machine is now ready to use.
1. Fill the Water Tank
Press the flip-top lid to open. Pour the desired
amount of cold, preferably filtered water into
the tank using a jug or the provided carafe.
Never use Distilled, De-mineralized or
highly filtered water as this will affect the
electronics and the taste of your coffee.
If using the carafe, ensure the carafe is clean
and the carafe lid is securely locked in place.
The LCD screen will indicate the amount of
water in the tank as it is filled. The machine will
beep when full and the water level float will rise
to indicate the maximum level. Do not exceed
the 12 cup maximum. Doing so may cause the
carafe to overflow or water spillage at the back
of the machine. Close the flip-top lid.
NOTE
Always ensure your carafe is clean
before brewing. Residual coffee will
affect the taste of your next cup.
NOTE
Check the water level on the LCD
screen before use. We recommend
always keeping the water tank full. The
water tank should be refilled with cold,
preferably filtered water. Never fill with
de-mineralized water or any other liquid.
NOTE
Never pour water into the bean hopper
or grinding chamber area. Doing so can
cause the grinder to clog. Only
re-commence use when the grinding
chamber and grinding burrs are
completely dry. Refer to Troubleshooting,
‘Moisture clogging grinder’, page 26.
NOTE
Never fill the water tank once the coffee
machine has started a brewing cycle.
This will affect the volume dispensed
into the carafe.
2. Pre-Warm the Carafe
A warm carafe will help maintain the coffee’s
optimal temperature and keep coffee hotter
for longer. Remove the carafe lid by turning
counter-clockwise then lifting upwards.
Fill the carafe with hot water and leave to stand
for about 30 seconds then discard the water.
To lock the carafe lid back into position, align
the arrow on the carafe lid with the ALIGN
arrow on the carafe. Turn clockwise until the
arrow on the carafe lid aligns with the LOCK
arrow on the carafe. This ensures that the lid is
closed and in the proper position for brewing
and pouring. Place the carafe into position
under the drip stop outlet.
BDC650BSS_USC_IB_E20_FA.indd 12 24/1/20 9:41 am

13
OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT
ALIGN
ARROWS
THEN TURN TO LOCK
NOTE
Ensure the carafe is clean and completely
empty and the lid is securely locked in
place before placing under the drip stop
outlet. Starting a brew cycle with water
or coffee in the carafe will cause the
carafe to over flow.
3. Select ‘Carafe’ Mode
Press the CUP|CARAFE button. The LCD
screen will display a Carafe symbol and the
current number of cups selected. Rotate the
CUP|CARAFE dial to select the required
number of cups to brew. You can choose less
than the current tank level (2 cup minimum),
while the maximum is the amount of water
in the tank, up to 12 cups. If you select cups
greater than the level in the water tank, the
LCD will display FILL TANK and the water
tank symbol will flash.
4. Select the Brew Strength or
‘PRE-GROUND’ Coffee Setting
There are 8 Strength settings. The LCD
screen will display the current strength
setting. Rotate the STRENGTH dial to select
your required Strength. 1 is the weakest and
8 is the strongest. We recommend starting
on setting 4 for a medium strength coffee.
Adjust strength higher or lower to suit
your taste.
NOTE
If using pre-ground coffee, rotate the
STRENGTH dial to select the
‘PRE-GROUND’ coffee setting.
This will disable the burr grinder.
Add pre- ground coffee to the gold tone
filter or a paper filter.
We recommend 1 level tablespoon of
pre-ground coffee per 5oz/150ml cup
of water. Adjust the amount according
to your individual taste. The maximum
capacity for pre-ground coffee is
12 level tablespoons. Exceeding this
amount may cause overflow.
5. Start the Brew Cycle
Press the START | CANCEL button.
The grinder will commence grinding the
correct amount of coffee for the selected brew
size and strength. If the ‘PRE-GROUND’
coffee setting has been selected, the grinder
will be disabled.
NOTE
Steam may emit from the rear steam
vent during grinding and brewing.
This is normal.
BDC650BSS_USC_IB_E20_FA.indd 13 24/1/20 9:41 am

14
OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT
The count-down timer will then begin.
The time displayed is an estimate only and will
depend on the brew size and strength settings
you have selected.
The LCD screen will display:
a) ‘PRE-HEATING’ as the water is heated
to the optimal temperature. The pre-
heating time will depend on the starting
temperature of the water in the water tank.
b) ‘BREWING’ as the coffee is dispensed into
the carafe.
To stop the cycle at any time, press the
START | CANCEL button. You will hear a
winding noise. This is normal.
CAUTION
Never open the swing-out door and
remove the coffee basket while brewing.
Hot water and coffee can cause injury.
The coffee basket and gold tone or paper
filter may still be very hot after brewing.
Use caution and allow to cool before
removing.
Hot steam may rise when pouring.
The bottom of the carafe is hot to touch
for several minutes after brewing.
Use caution and ensure not to set the
carafe on a heat sensitive surface.
6. Using the Brew Pause Feature
The Brew Pause feature temporarily ceases the
flow of coffee when the carafe is removed so a
cup can be poured mid-brew. Do not remove
the carafe for longer than 20 seconds or the
coffee may overflow the coffee basket.
7. Empty the Coffee Basket
Once the brewing cycle is complete, the ready
signal will sound and a winding noise will be
heard. This is normal. The coffee machine will
automatically shut-off and the LCD screen will
flash ‘EMPTY COFFEE FILTER’ as a reminder
to remove the coffee basket and discard the
used grinds. Wash the coffee basket, taking
particular care to rinse the chute area. Then dry
the coffee basket and chute area thoroughly.
We also recommend checking the coffee
grinds chute disc for any build-up of coffee
grinds. This is the stainless steel disc that is
visible when the swing-out door is opened.
A build-up of grinds on this disc can affect the
performance of the machine. Wipe the disc
clean then dry thoroughly.
BDC650BSS_USC_IB_E20_FA.indd 14 24/1/20 9:41 am

15
OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT
8. Pour and Enjoy
Ensure the carafe lid is securely locked in
position. There is no need to turn or adjust the
lid before pouring. The lid automatically opens
when pouring so as to keep coffee hot.
9. When Not In Use
The LCD screen will go dim after
5 minutes of none operation.
USING THE GRIND CONTROL™
- SINGLE CUP MODE
1. Fill the Water Tank
Press to open the flip-top lid. Pour the desired
amount of cold, preferably filtered water into
the tank using a jug or the carafe. Never use
Distilled, De-mineralized or highly filtered
water as this will affect the electronics and
the taste of your coffee.
The LCD screen will indicate the amount of
water in the tank as it is filled. The machine will
beep when full and the water level float will rise
to indicate the maximum level. Do not exceed
the 12 cup maximum. Doing so may cause
water spillage at the back of the machine. Close
the flip-top lid.
NOTE
Check the water level on the LCD
screen before use. We recommend
always keeping the water tank full. The
water tank should be refilled with cold,
preferably filtered water. Do not fill
with any other liquid.
NOTE
Never pour water into the bean hopper
or grinding chamber area.
Doing so can cause the grinder to
clog. Only re-commence use when the
grinding chamber and grinding burrs
are completely dry.
Refer to Troubleshooting, ‘Moisture
clogging grinder’, page 26.
Never fill the water tank once the coffee
machine has started a brewing cycle.
This will affect the volume dispensed
into the cup.
2. Pre-Warm the Cup or Travel Mug
A warm cup will help maintain the coffee’s
optimal temperature and keep coffee hotter
for longer. Fill the cup with hot water for about
30 seconds then discard the water. Place the
cup into position under the drip stop outlet.
TIP
For taller cups and travel mugs, remove
the drip tray at the base of the machine.
Press the OPEN button to open the
swing-out door. Insert the cup/mug
into the drip tray cavity before closing
the swing-out door. The maximum cup/
mug dimensions are 7.5" height, 2¾"
diameter.
REMOVE DRIP TRAY, OPEN DOOR,
INSERT CUP, CLOSE DOOR.
BDC650BSS_USC_IB_E20_FA.indd 15 24/1/20 9:41 am

16
OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT
3. Select ‘Single Cup’ Mode
Press the CUP|CARAFE dial until the LCD
screen displays the CUP symbol and the
current cup size selected in ounces. Rotate the
CUP|CARAFE dial to select the required size.
There are 7 size options to accommodate
for different amounts or milk, half-and- half
and creamer. Always ensure your cup is an
adequate size for the setting selected.
The amounts displayed on the LCD screen
are approximate only. Actual amounts may
vary depending on the type of filter used, the
coffee grind size, roast, blend and freshness, or
amount and type of pre-ground coffee used.
4. Select the Brew Strength or
‘PRE-GROUND’ Coffee Setting
There are 8 strength settings. The LCD screen
will display the current strength setting. Rotate
the STRENGTH dial to select your required
strength. 1 is the weakest and 8 is the strongest.
We recommend starting on setting 4 for a
medium strength coffee. Adjust strength
higher or lower to suit your taste.
NOTE
If using pre-ground coffee, select the
‘PRE-GROUND’ coffee setting. This will
disable the grinder. Add pre-ground
coffee to the gold tone filter or a paper
filter. We recommend 1 level tablespoon
of pre-ground coffee per 5oz/150ml cup
of water. Adjust the amount according
to your individual taste. The maximum
capacity for pre-ground coffee is 12 level
tablespoons. Exceeding this amount may
cause overflow.
5. Start the Brew Cycle
Press the START | CANCEL button.
The grinder will commence grinding the
correct amount of coffee for the selected brew
size and strength. If the ‘PRE-GROUND’
coffee setting has been selected, the grinder
will be disabled.
NOTE
Steam may emit from the rear steam vent
during grinding and brewing. This is
normal.
The count-down timer will then begin. The
time displayed is an estimate only and will
depend on the amount and strength settings
you have selected. The LCD screen will display:
a) ‘PRE-HEATING’ as the water is heated
to the optimal temperature. The
pre-heating time will depend on the
starting temperature of the water in
the water tank.
b) ‘INFUSING’ as coffee and water are
steeped together.
c) ‘BREWING’ as the coffee is dispensed
into the cup.
BDC650BSS_USC_IB_E20_FA.indd 16 24/1/20 9:41 am