Breville VKJ932 User manual

™
illuminated
lter kettle
®

2
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE
This appliance can be used by children aged from 8 years
and above if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved. Cleaning and user
maintenance shall not be made by children unless they are
older than 8 and supervised. Keep the appliance and its cord
out of reach of children aged less than 8 years.
Children shall not play with the appliance.
Never use a power base other than the one supplied with the
appliance.
Never ll the kettle above the MAX marking. If the kettle is
overlled, boiling water may be ejected.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons
in order to avoid a hazard.
product safety
!This appliance generates heat during use. Adequate precaution must be taken to
prevent the risk of burns, scalds, res or other damage to persons or property caused
by touching the exterior whilst in use or during cooling.
!Never use this appliance for anything other than its intended use. This appliance is for
household use only. Do not use this appliance outdoors.
!Always ensure that hands are dry before handling the plug or switching on the
appliance.
!Always use the appliance on a stable, secure, dry and level surface.
!This appliance must not be placed on or near any potentially hot surfaces (such as a
gas or electric hob).
!Do not use the appliance if it has been dropped, if there are any visible signs of
damage or if it is leaking.
!Ensure the appliance is switched off and unplugged from the supply socket after use
and before cleaning.
!Always allow the appliance to cool before cleaning or storing.
!Never immerse any part of the appliance or power cord and plug in water or any other
liquid.
!Never let the power cord hang over the edge of a worktop, touch hot surfaces or
become knotted, trapped or pinched.
!Never leave the appliance unattended when in use.

3
product safety
!Beware of steam coming from the spout or lid especially during relling. Never open
the lid during the boiling cycle.
!Never ll the appliance when it is positioned on the power base.
!Never use the kettle without sufcient water in the kettle for it to operate correctly.
!Never allow the appliance to boil dry.
!Never lter hot or boiling water.
!Never attempt to lter untreated, raw water or water of unknown quality. The lter must
only be used with municipally treated tap water.
!Never use the appliance without the lter funnel, BRITA® lter cartridge or lid in
position.
!Always ensure that the lter is positioned securely in the lter funnel.

4
features
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
1 BRITA®Memo start button
2 BRITA®Memo display
3 Hinged lid
4 Lid release button
5 Illuminated water chamber
6 On/off switch
7 BRITA® MAXTRA lter cartridge
8 360º power base with cord storage
and cable exit
9 Fast boil 3000W concealed element
10 Filter funnel (inside kettle)
11 Spout
s
q
t
i
a
e
o
w
y
u
r

5
before using for the first time
Please follow the information on the use of BRITA® lter cartridges and the BRITA® Memo
indicated in the BRITA® information guide.
1. Remove any packaging/promotional material from the kettle.
2. Always use your kettle on a dry, level, stable, secure work surface.
3. Open the lid and lift out the lter funnel. Wash it in warm, soapy water. Rinse and dry
thoroughly then replace the lter funnel.
4. Follow the section on preparing the BRITA® MAXTRA cartridge on page 6.
5. After preparing and installing the BRITA® MAXTRA cartridge, ll, boil then discard the
water twice. This will remove any residue left over from the manufacturing process.
Your BRITA® lter kettle is now ready for use. Note that you will only need to do this
procedure once and not each time you renew the BRITA® cartridge.
Before connecting to a power source, make sure your mains supply voltage is the same
as the one indicated on the appliance. Connect the plug to a suitable power outlet and
make sure that the power cord does not overhang the work surface.

6
preparing the BRITA®MAXTRA cartridge
1. Remove the cartridge from its wrapping (it is normal
for the cartridge to appear moist during storage).
2. Immerse the cartridge in cold water and shake gently
to remove any air bubbles. There is no need to pre-
soak this cartridge before use.
3. Insert the cartridge into the lter funnel and push it
rmly into place. When correctly tted, the cartridge
should remain in place when the funnel is turned
upside-down.
4. Fill the lter funnel with cold tap water and allow it
to lter through, then discard the water. Repeat this
process, again discarding the water.
5. Rell the lter funnel with water - the BRITA®
MAXTRA cartridge is now ready for use. You do not
need to keep the lter cartridge immersed in water.
• Always make sure that you have MAXTRA spare
cartridges to hand. When buying new cartridges
look for the BRITA® MAXTRA lter on the cartridge
packaging.
• When it is time to replace the BRITA® MAXTRA lter
cartridge after 4 weeks use, simply lift the handle
on top of the cartridge and pull upwards to remove.
BRITA® cartridges are 100% recyclable. Visit
www.brita.co.uk or call the BRITA® Care team for
further information on participating retailers.
• Repeat steps 1-5 with a new cartridge.

7
using the BRITA®Memo function
It is important to change your BRITA® lter
cartridge regularly to enjoy the benets of BRITA®
ltered water. Filtering your water improves the
look and taste of hot drinks by reducing limescale
(carbonate hardness), chlorine and other
impurities.
The BRITA® Memo automatically reminds you
when your lter cartridge needs to be changed.
When you have tted and prepared your lter
cartridge, start the Memo as follows:
1. Press and hold the Start button until 4 bars
appear on the display and ash twice. The
Memo is now set.
2. The ashing dot in the corner of the display
indicates that the Memo is working.
3. Every week, one bar will disappear to indicate
the remaining cartridge life. When only one bar
is showing, check that you have a replacement
lter cartridge available.
4. After 4 weeks, all four bars will disappear and
a ashing arrow will appear to indicate that the
cartridge should be replaced.
Wash and dry the lter funnel, insert a new
cartridge and restart the Memo as described
above.
Please note that the Memo is only intended to be
used with BRITA® lter cartridges.
q
w
r
e

8
using your kettle
If this kettle is lled above the maximum level mark, hot water may be ejected
from the spout during boiling. Beware of steam coming from the spout or lid
especially during relling. Never open the lid when the kettle is boiling. The Filter
and lter funnel must be tted to the kettle in order for it to operate correctly.
1. With the kettle switched off, plug the power base into a suitable power outlet.
2. Remove the kettle from the power base before lling it with water. Do not ll the kettle
through the spout.
3. Open the lid and ll the kettle with water. Don’t overll the kettle and always
ensure that there is sufcient water in the kettle for it to operate correctly. This is
approximately 250ml or 1 teacup full. Always check the water level when the kettle
is positioned on its power base. Allow a short time after lling for the water to pass
through the lter.
4. Close the lid and then switch the kettle on. Make sure that the lid is closed correctly
to ensure safe operation.
5. When the kettle is switched on, the switch and the water level window will illuminate.
6. When the water reaches boiling point, the kettle will switch off automatically. The
water level window illumination will switch off.
7. You may also switch the kettle off manually at any time by moving the switch to the
off position.
Always use caution when carrying your kettle when it is full of boiling water and when
pouring it.
Energy saving hints and tips
A Breville® kettle, if used correctly, is a very energy efcient device. Why not try some of
these energy saving tips:
• Only boil the water you need. Overlling your kettle by one cup is the equivalent to
using an energy saving light bulb for one hour!
• It is not always necessary to re-boil your kettle. For example, one litre of water will
still be at 90°C after ve minutes - the perfect temperature for a cup of coffee.
If the kettle boils dry
If the kettle is operated with insufcient water a built in fail-safe device will automatically
switch off the kettle.
• Unplug the kettle and allow it to cool. When the kettle has cooled down sufciently
the device will reset itself.
• Once the device has reset, rell the kettle with cold water and use it as normal.

9
cleaning
Always unplug the kettle from the mains supply socket and allow it to
completely cool down before cleaning or descaling it. Do not immerse the kettle,
power base or power cord and plug in water or any other liquid.
• Clean the exterior surface of the kettle with a damp cloth and then polish with a soft
dry cloth. Do not use steel wool pads or harsh/abrasive cleaners.
• Descale your kettle to keep it working efciently. Use a proprietary descaling product
following the manufacturer’s instructions carefully. Please note that when using the
BRITA® lter cartridge properly and regularly, you would need to descale your kettle
less often.
• When descaling the kettle using a descaling product, you must remove the BRITA®
lter cartridge and the lter funnel. After descaling, thoroughly rinse the kettle then
ret the lter funnel and the BRITA® lter.
• Always follow the manufacturers instructions carefully when descaling the kettle.
• Each time the lter cartridge is replaced, wash the lter funnel in warm, soapy water,
rinse thoroughly and dry before preparing and tting the new lter cartridge.

10
connection to the mains supply
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed and
replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be retted. The
appliance must not be used without the fuse cover tted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord and
an appropriate plug tted as detailed. If you remove the plug it must not be connected to
a 13 amp socket and the plug must be disposed of immediately.
If the terminals in the plug are not marked or if you are unsure about the installation of the
plug please contact a qualied electrician.
13A
Blue
(Neutral)
Brown
(Live)
Fuse
Green/Yellow
(Earth)
Plug should be ASTA approved to BS1363
Fuse should be ASTA
approved to BS1362
Ensure that the outer sheath of
the cable is firmly held by the cord grip

11
after sales service
These appliances are built to the very highest of standards. There are no user serviceable
parts. Follow these steps if the unit fails to operate:
1. Check the instructions have been followed correctly.
2. Check that the fuse has not blown.
3. Check that the mains supply is functional.
If the appliance will still not operate, return the appliance to the place it was purchased for
a replacement. To return the appliance to the Customer Service Department, follow the
steps below:
4. Pack it carefully (preferably in the original carton). Ensure the unit is clean.
5. Enclose your name and address and quote the model number on all correspondence.
6. Give the reason why you are returning it.
7. If within the guarantee period, state when and where it was purchased and include
proof of purchase (e.g. till receipt).
8. Send it to our Customer Service Department at the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
Middleton Road, Royton, Oldham OL2 5LN, UK
Telephone: [phone] Fax: [phone]
e-mail: [email protected]
6. For BRITA®/MAXTRA water lter cartridge and BRITA® Memo queries, contact
BRITA® Customer Care Services on:
www.brita.co.uk
Telephone: [phone]
E-mail: [email protected]

12
useful information
Replacement parts
For additional or replacement parts, please visit www.breville.co.uk or call us on 0161
621 6900.
Troubleshooting
For troubleshooting and FAQs visit: www.breville.co.uk/faqs
Turn on your Creativity™
Let the Breville® team help you turn on your creativity with a gateway to a world of food
and drinks without limits. You don’t have to travel far—just to your computer, tablet or
mobile—where you will discover our FREE website with top tips and recipes to inspire
your imagination. Join us now at www.turnonyourcreativity.com
™

13
13
guarantee
Please keep your receipt as this will be required for any claims under this guarantee.
This appliance is guaranteed for 1 year after your purchase as described in this
document.
During this guaranteed period, if in the unlikely event the appliance no longer functions
due to a design or manufacturing fault, please take it back to the place of purchase, with
your till receipt and a copy of this guarantee.
The rights and benets under this guarantee are additional to your statutory rights, which
are not affected by this guarantee. Only Jarden Consumer Solutions (Europe) Limited
(“JCS (Europe)”) has the right to change these terms.
JCS (Europe) undertakes within the guarantee period to repair or replace the appliance,
or any part of appliance found to be not working properly free of charge provided that:
• you promptly notify the place of purchase or JCS (Europe) of the problem; and
• the appliance has not been altered in any way or subjected to damage, misuse,
abuse, repair or alteration by a person other than a person authorised by JCS
(Europe).
Faults that occur through, improper use, damage, abuse, use with incorrect voltage, acts
of nature, events beyond the control of JCS (Europe), repair or alteration by a person
other than a person authorised by JCS (Europe) or failure to follow instructions for use
are not covered by this guarantee. Additionally, normal wear and tear, including, but not
limited to, minor discoloration and scratches are not covered by this guarantee.
The rights under this guarantee shall only apply to the original purchaser and shall not
extend to commercial or communal use.
If your appliance includes a country-specic guarantee or warranty insert please refer
to the terms and conditions of such guarantee or warranty in place of this guarantee or
contact your local authorized dealer for more information.
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. E-mail us at [email protected] for further recycling
and WEEE information.
Jarden Consumer Solutions (Europe) Limited
5400 Lakeside
Cheadle Royal Business Park
Cheadle
SK8 3GQ
UK

14
14

15
15

VKJ932_VKJ972_Iss_2 11/14 93766-1 UKPUL
P.N. 180467
Jarden Consumer Solutions (Europe) Limited
Cheadle Royal Business Park, Cheadle, SK8 3GQ, United Kingdom
e-mail: [email protected]
Telephone: [phone]
For Customer Service details, please see the website.
www.breville.co.uk
© 2014 Jarden Consumer Solutions (Europe) Limited
All rights reserved. Imported and distributed by Jarden Consumer Solutions (Europe) Limited,
Cheadle Royal Business Park, Cheadle, SK8 3GQ, United Kingdom.
The product supplied may differ slightly from the one illustrated due to continuing product development.
Printed in China
®