Brew Express BEC-110 User manual

model no. BEC-110
BREW EXPRESS®
SET UP / OPERATION GUIDE
IMPORTANT NOTE:
For more information see our instructional video online at www.BrewExpress.com.
Do not return this product to place of purchase without authorization.
For return authorization or service call 866.268.5953

CONTENTS
1. Safety 1-2
2. Specifications & Requirements 3
3. Hardware/Tools/Parts 4
4. Set Up 5 -6
5. Features 7
6. Control Functions 8
7. Start Up 9
8. Operation 10-11
9. Maintenance 12
10. Troubleshooting 13-14
11. Parts & Service 15
12. Warranty Information 16-17

1
SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all Instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. The voltage and frequency of the supply connections should conform to those of the rating label.
4. Close supervision is necessary when any appliance is used by or near children.
5. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
6. Do not operate any appliance after the appliance malfunctions, or has been damaged in any manner.
Call and discuss problem with customer service.
7. The use of accessory attachments not recommended by the appliance manufacturer may result in re,
electric shock or injury to persons.
8. Do not use outdoors.
9. Do not place on or near a hot gas or electric burner, or in a heated oven.
10. The appliance should be installed in a place not easily reached by children.
11. Do not use appliance for other than intended use.
12. To reduce the risk of shock, discontinue use of the appliance if water leakage occurs.
13. To reduce the risk of re, do not place any heating or cooking appliance beneath the appliance.
14. To reduce the risk of re, do not mount unit over or near any portion of a heating or cooking appliance.
15. To reduce the risk of electric shock, do not mount over a sink.
16. To reduce the risk of re, do not store anything directly on top of the appliance surface when the appliance
is in operation.
SAVE THESE INSTRUCTIONS

2
SAFETY
IMPORTANT:
Please read and follow instructions carefully before starting your BREW EXPRESS COFFEE SYSTEM.
The BREW EXPRESS dispenses extremely hot water. Hot liquids may cause severe burns if it contacts skin. Use
extreme caution when handling hot liquids dispensed by the BREW EXPRESS. KEEP HANDS AWAY FROM SPRAY
HEAD, BREW BASKET, CARAFE OR MUG DURING BREW CYCLE.
• DO NOT use carafe or mug that is cracked or damaged.
• DO NOT remove the brew basket while brewer is in operation.
• DO NOT place carafe in microwave or place on stove top.

3
SPECIFICATIONS AND REQUIREMENTS
BEC-110 SPECIFICATIONS:
Read and follow instructions carefully before installing your BREW EXPRESS in-the-wall
COFFEE SYSTEM. For best results, it is advised that you hire a qualified professional.
1. Overall Dimensions 12 1/4” X 13 1/2” X 7 3/4” (see below).
2. Electrical Requirements 120VAC, 60HZ. (1400 watts).
3. Water Requirements 1/4” OD water supply line (copper or poly) 30 psi to 90 psi. Potable COLD water is required.
NOTE: If water is not available, a 5 gallon dispensing jug can be used with a pump (not supplied).
Contact Brew Express for more information.
Please Note: A filter and shut off valve at water source is recommended. The filter, such as an ice maker type filter,
can easily be installed at the source. If water lines are not purged or clear of debris or a filter is NOT installed, foreign
particles (debris) in water may clog brewer system causing failure, and will void all warranties.

4
HARDWARE/TOOLS/PARTS
BREW EXPRESS comes with the following items to ensure a successful setup.
Check to be certain all items have been included with your brewer.
• Brewer
• Carafe and lid
• Brew baskets (1 basket style, 1 cone style)
• Setup/Operation guide
• Hardware kit (includes quick connector)
• 10’ water line
• Under sink faucet connection
• “T” connection for refrigerator
TOOLS
• tape measure
• wrench
• knife (for cutting polyethylene tubing)
• drill and 3/8” bit (optional)
PARTS RECOMMENDED / REQUIRED
• water lter (recommended)
HARDWARE NOTICE:
A lter is required for ALL hard water supplied sources. Filter must be suitable for calcium carbonate
and lime scale – most major brands for commercial coffee lter systems are available.

5
SET UP
IMPORTANT:
Read and follow instructions carefully before installing your BREW EXPRESS COFFEE SYSTEM.
1. Unpack Product
Carefully remove Brew Express from packaging.
Remove hardware kit from inside brew basket.
2. Select Location
Find a location with close proximity to a power outlet and water supply.
3. Connect water line to water source.
Water source options are typically the cold water tap under the sink or the water line connecting the
refrigerator ice maker.
NOTE – shut off water sources before removing or alternating existing lines.
!
!
water line to sink
¼” poly water line
to coffee maker
cold water
valve
angle stop
valve
adaptor
Option 1: Cold Water Tap
water line
to ice maker
¼” poly water line
to coffee maker
Option 2: Ice Maker Line
cold water line
!
!
• connection to water supply (supplied)
• remove water line from valve to facet
• add valve
• reconnect facet line to tee hardware
• connect new ¼” poly line to valve connection
• Valve connection included
• cut existing line
• add valve
• connect new ¼” poly line to tee

4. Run water line to brewer location.
A. Run water line behind cabinets through the wall to brewer area.
B. Run water line direct from source to counter top (for example along the side of the refrigerator).
5. Waterline connection to brewer
A. Cut waterline near nal location of brewer.
B. Attached water line to quick connector (supplied).
• place compression nut onto water line
• slide water line onto barbed feature
• tighten compression nut (with wrench)
• note - quick connector has built in valve, water can now be turned on
C. Turn on water supply and check for leaks.
D. Snap quick connector into mating connector on rear of brewer.
• to release connection, press gray tab on connector on brewer.
6. Connect Power
Plug the power cord into an outlet.
Excess cord can be stored in the recess on the back of the Brew Express.
recess tab
water line
compression nut
quick connector

cord recess

water filter recomended
(not included)
!
!
SET UP
6

FEATURES
7
Power Switch
Programmable
timer and clock.
Large, bright and easy
to read display.
Adjustable cup selector
for the exact amount of
perfect coffee.
Patented in-the-wall
design saves precious
counter space.
Handsome Euro design
compliments any decor.
Convenient and practical.
Brew Express™ is plumbed into
the wall and fills on command
so you never have to manually
fill with water.
Easy clean carafe is both
functional and beautiful,
keeping beverages hot.
The blue accent light
is an attractive addition
to any room and helpful
nightlight.
Exclusive Pause-N-Brew
detection sensor knows
when carafe is removed
and stops the brew cycle.
Carafe pad never gets
hot so it won't burn
fingers or scorch coffee.
Stylish and sturdy
construction designed
for years of use and
trouble-free maintenance.
Unique brew basket
allows for removal of
carafe without spilling.

8
CONTROL FUNCTIONS
Display Panel
Brew Button
Starts brew cycle. Brewing stops automatically or by pressing the brew button again.
Status Light
Green (steady) – wait mode
Red (steady) – brew mode
Red (slow blinking) – carafe or mug not detected
Red (fast blinking) – no water
Adjustable Cup Selector
Selects the amount of water to be used during brew cycle:
2 cup (8 oz), 1/2 carafe (23 oz), full carafe (50 oz)*
* volumes my vary slightly
Clock
Continuously displays current time and is used for setting automatic brew time.
PM Indicator
Indicates PM for clock.
Beeper On/Off Indicator Light
Indicates if brew complete beeper is on or off.
Auto Timer Switch & Indicator Light
Turns on automatic brew cycle at set time.
Accent Lighting Button
Turns on and off accent lighting located behind brew basket.
PROGRAM DISPLAY PANEL
BREW CUP SELECTOR
2
TIMER
AM
PM
LIGHT
Adjustable Cup Selector Clock PM Indicator Accent Lighting
Brew Button
& Status Light Beeper On/Off
Indicator Light
Auto Timer Button

START UP
9
IMPORTANT:
Please read and follow instructions carefully before starting your BREW EXPRESS COFFEE SYSTEM.
Did you purge water lines during installation to remove any foreign particles (debris) in lines?
Debris in water lines can clog brewer system causing failure, and VOID ALL WARRANTIES.
The BREW EXPRESS dispenses extremely hot water. Hot liquids may cause severe burns if it contacts skin. Use ex-
treme caution when handling hot liquids dispensed by the BREW EXPRESS. KEEP HANDS AWAY FROM SPRAY HEAD,
BREW BASKET, CARAFE OR MUG DURING BREW CYCLE.
1. Make sure water supply is turned on prior to starting BREW EXPRESS.
The BREW EXPRESS will not operate if there is no water.
2. Make sure power is supplied to the BREW EXPRESS.
3. Turn on power switch, depress button on top of unit. Brew button and LED display will illuminate.
4. Flush brewing system by running two cycles of water through the brewer. Place brew basket under spray head without coffee
or lter, place empty carafe under brew basket and press the brew cycle button. After brewing cycle is complete, empty carafe
and repeat.
5. Wash carafe and brew basket with warm soapy water.
IMPORTANT REMINDERS
• Always empty carafe prior to starting the unit, otherwise overlling can occur.
• Use appropriate brew basket with carafe and mug.

10
OPERATION
1. Power Switch
Switch located on top of brewer. Depress button to turn on power
2. Set Clock
The clock is preset to 12:00 noon when power is rst applied.
To set the time, follow these steps:
a. Press and hold the “Light” button for 5 seconds.
b. Press “Brew” button to toggle between 12 and 24 hour clock. AM/PM light is off for 24 hour clock.
c. Press the “Cup Selector” button to set hours. Note AM/PM indicator light. Holding down button advances hours.
d. Press the “Timer” button to set the minutes. Holding down button advances minutes.
e. Press “Light” button to nish time setting.
3. Set Up Brew Basket
For brewing into the carafe use the carafe brew basket (with stopper). For brewing into a mug use the single cup
brew basket (cone style). Select the appropriate lter and place into brew basket. Add desired amount of coffee
for taste preference (typically 1 tbsp per cup). Slide the brew basket into the brewer.
CAUTION – Ensure brew basket is completely inserted, otherwise problems may occur such as excessive
steam or overlling.
4. Coffee Filter Selection
10-12 cup at bottom lter for carafe, #4 cone lter for single cup brew basket. Filters vary in height. It is important
to select a lter that extends to the top of the brew basket, otherwise coffee grounds may overll the lter.
5. Position Carafe or Mug
Position an EMPTY carafe or mug in the BREW EXPRESS under the brew basket. The detection sensor
will not allow the brewer to operate unless the carafe or mug is positioned under the brew basket. The brew light
will blink if nothing is detected. When using a cup or mug, place it back far enough to activate sensor.
WARNING: ALWAYS EMPTY CARAFE OR MUG PRIOR TO STARTING THE UNIT OR OVERFILLING WILL OCCUR.
6. Cup Selection
Select the amount of water by pressing the “Cup Selector” button. The icons on the button will illuminate to indicate
selection. The volume of water for each setting is approximately 8 oz (2 cup), 23 oz (1/2 carafe) and 50 oz
(full carafe). The volume of water for each setting can be increased if desired. This is done by increasing the brew
time (see below).
To increase volume:
a. Select volume to change using the “Cup Selector” button.
b. Press and hold the “Cup Selector” button for 5 seconds.
c. The display now shows the current time duration (default: 2 cup = 70 sec,
1/2 carafe = 180 sec, full carafe = 350 sec).
d. Press the “Cup Selector” button to increase time and “Timer” button to decrease time (8 sec = ~ 1 oz).
e. Press “Light” button to nish changing the brew duration.
Single Cup
Brew Basket
(cone style)
Carafe
Brew Basket
BREW CUP SELECTOR
2
TIMER
AM
PM
LIGHT
Clock Set Mode
Hour
Clock Set Mode
Minute Set Clock

11
OPERATION
7. Manual Brew Cycle
To manually start a brew cycle press the “Brew” button. The brew light will turn red once the cycle has started. If brewer is cold,
the heater will preheat the water before starting the brew cycle. After the selected amount of water is
dispensed, the brew light will blink for 40 seconds. At that time the BREW EXPRESS will beep 4 times.
8. Automatic Brew Cycle
To automatically start a brew cycle press the “Timer” button. The button will illuminate and the start time will blink
5 times on the clock display.
To program the start time:
Press and hold the “Timer” button for 5 seconds.
Press the cup selector button to set hours. Note AM/PM indicator light. Holding down button advances hours.
Press the “Timer” button to set the minutes. Holding down button advances minutes.
Press “Light” button to nish time setting.
9. Pause-N-Brew Feature
The BREW EXPRESS carafe can be removed during brew cycle to pour a cup of coffee. The detection sensor will stop
the ow of water and the valve on the brew basket will prevent existing water from spilling. Once carafe is
returned, operation will continue. If carafe is missing for over 5 minutes, BREW EXPRESS will shut off automatically.
10. Accent Lights
To turn on and off the accent lights press the “Light” button. The accent lights are located behind the brew basket.
11. Sound Setting (Beeper On/Off)
At the end of a brew cycle a beeper is sounded 4 times.
To turn off the beeper:
Press and hold the “Brew” button for 5 seconds.
A single beep will indicate the sound is off. Also, the beeper indicator light will be off.
Two beeps will indicate the sound is on. Also, the beeper indicator light will be on.
12. Optional Carafe Lock
An optional carafe lock is available. This device prevents the carafe from moving in mobile applications (marine, recreational
vehicles), or it prevents accidental removal by children.
The carafe locks consists of a lock
lever and spring. It installs easily
by depressing the sides of the lock
lever until the pins slide into the
mounting holes on the brew basket.
The spring slides over a pin on the
back of the brew basket and into a
hole on the lock lever.
lock lever and spring
depress sides of lock
lever to install

12
MAINTENANCE
Cleaning
Carafe
Clean the carafe and lid after each use with warm water and a mild dish soap.
Brew Basket
The brew basket should also be cleaned after each use with mild dish soap and warm water.
The brew basket is dishwasher safe (top rack only).
Spray Head
It is recommended the spray head be cleaned occasionally with
mild soap and warm water depending on the amount of use.
When the unit is cool, remove the spray head by gently rotating it
by hand counter clockwise. After cleaning, reinstall the spray head and
hand tighten only. Be careful not to damage spray head.
Brewer Exterior
Clean the exterior of the brewer with a soft damp cloth and mild soap.
Avoid getting excessive water around buttons and detection sensors.
DO NOT use abrasive cleansers, they will damage the surface of the brewer.
Also, do not use ammonia (Windex), denatured alcohol or chlorinated based
cleaners. They will damage the plastic.

13
TROUBLESHOOTING
No power or display is not illuminated
• Press power button (on top of brewer).
• Conrm the power to the rough-in box is turned on (check circuit breaker).
• Conrm brewer is fully pressed into the rough-in box.
• Check the outlet inside rough-in box. Remove the brewer and check
outlet by plugging in another appliance (lamp, etc). If there is no power,
then turn off power to circuit and check wiring.
Water does not flow from spray head
• The BREW EXPRESS preheats the water before starting the brew cycle. You may be waiting for the preheat
cycle to end.
• Conrm the carafe or mug is centered under the brew basket. BREW EXPRESS will not start if the detection
sensor does not see a carafe or mug. Brew light will blink slowly. If using a mug, one may need to move it further
inside brewer.
• The BREW EXPRESS will not operate if there is no water. LED display will ash EEEE if there is no water.
• Conrm the water is connected to brewer and is turned on.
• Conrm the water line is properly connected inside the rough-in box. Remove the two mounting screws from behind
the brew basket and carafe and pull out brewer. The water line quick connectors must be pressed together rmly.
Also, check for a pinched or kinked water line.
• Check quick connections to insure they are snapped together and that water is on.
• Check the water lter (if present) at the supply. If lter is clogged replace lter.
• If problem persists, then brewer maybe clogged by debris. Call customer service.
• If outside air temp is below freezing then check to see if water line is frozen.
Water overflow from carafe
• Carafe was not emptied before brew cycle started (empty carafe).
• Flow rate too high, conrm by running 2-3 pots of water, if ow rate is still too high call for customer service.
Water volume in carafe is too low
• Increase brewing time. See procedure on page 6.
• Check spray head for blockage.

14
TROUBLESHOOTING
Excessive Steam
• Inlet water line connected to hot water supply (connect to cold water).
• Spray head is plugged (remove spray head and clean or replace).
• Water ow is too low, conrm by running a full carafe and checking volume. See page 10 to reset / increase volume.
Taste Not Acceptable
• Quality or quantity of coffee placed in brew basket is not sufcient (purchase better quality coffee).
• Adjust coarseness of coffee grind.
• Spray head is plugged and water is boring hole in grounds (clean or replace spray head).
• Check temperature inside of a full carafe of water. It is possible heating system is not working properly.
Coffee temperature cold or lukewarm
• Carafe not keeping coffee hot enough. If using 2 cup or 1/2 carafe setting, consider pre-heating it
with hot water before brewing.
• Water ow rate too high or heater failed, call customer service.
Cup or mug not detected (flashing brew light)
• Mug not close enough to detect sensor (move further into brewer).
Water dripping from spray head
• Normally some water will drip from the spray head shortly after brewing.
• Debris may be inside valve. Disconnect water and reconnect, then run 1-2 full cycles of water in carafe.
If problem persists, contact customer service.
Programmed start time not working properly
• Review instructions on page 6 (Automatic Brew Cycle).

15
PARTS & SERVICE
Spare parts are available from Brew Express [phone] or at [email protected].
Contact Brew Express for all service and warranty issues.
• Spray head
• Brew Baskets (at bottom and cone)
• Carafe and lid
• Mounting screws
• Auxiliary water pump (for installation in areas without water supply)

16
WARRANTY
1 YEAR LIMITED WARRANTY
This limited warranty is the only one that applies to this product, and sets forth all the responsibilities of Brew Express regarding
this product. There is no other warranty, other than that described herein.
BREW EXPRESS is warranted, to the original purchaser only, to be free of defects for parts and labor for a period of 1 year from
the date of purchase. This warranty does not extend to subsequent purchasers, or purchases through a
non-authorized dealer or auction site. Brew Express will not be held responsible for any amount of damage in excess of the
retail purchase price of the BREW EXPRESS coffee system under any circumstances. Incidental and consequential damages are
specically excluded from coverage from this warranty.
The BREW EXPRESS coffee system is not intended for commercial food service use. This warranty does not apply to accessories
or damage to unit from misuse or incorrect installation. It is further noted that using the brewer without a water lter or ltered
water system (entire house lter) may void the warranty. This applies to areas where the water is not treated for sediment, high
mineral content or hard-water characteristics.
RETURN/REPAIR POLICY: Any BREW EXPRESS unit found to be defective may be returned to Brew Express after proper
authorization. Defective units returned to Brew Express within 1 year from the original date of purchase will be replaced or
repaired. The repaired or replaced unit will then be warranted under the terms of the remainder of the warranty period. The
customer is responsible for all shipping charges of returned units. During the warranty period Brew Express will be responsible
for shipping charges back to the customer.
LIMITATIONS: This warranty does not cover accessories (brew baskets, carafes, etc) and defects resulting from normal everyday
use, such as but not limited to chips, scratches, abrasions, and discoloration. Also, this warranty does not cover defects
due to failure to follow installation or operation instructions, improper care, abuse, accidents, damage during shipping and
unauthorized repair or alterations. All or any acts of nature or abnormal conditions causing malfunction or product failure are
considered not to be the responsibility of Brew Express and this warranty. Any damage resulting from this condition will be
sustained solely by purchaser.
STATE LAW RIGHTS: This warranty gives you specic legal rights. Some states do not allow limitations on how long an implied
warranty lasts or the exclusions or limitations of incidental or consequential damages, so the inclusions or limitations stated
herein may not apply. This warranty gives the purchaser specic rights; other rights which vary from state to state may also apply.
REQUEST FOR WARRANTY SERVICE: Contact Brew Express technical support by telephone, fax or mail. We suggest that you keep
the original packaging in case it may be necessary to ship the unit. When returning the unit, include you name, address, phone
number, dated sales receipt (or copy) with product serial number, problem description and repair/return authorization form.
WARRANTY ACTIVATION: Register warranty by mail, see information on following page.

17
WARRANTY
Name:
Address:
Phone: Email (Optional):
Model #: BE-104R BE-104C BE-110 BEC-110 MBE-112
Serial #: Product #
see back of unit or box
Date Of Purchase: Place Of Purchase:
Application: Residential Rv Office Other
Installed By: Self Contractor Plumber Electrician Other
On a scale of 1-5 Satisfaction With Product: (1Disstatisfied - 5 Very Satisfied )
Suggestions:
Warranty Registration Card
Register for warranty Fill out the form below, cut out and send to: Brew Express PO Box 1726 Longview,
WA 98632 Please Register 30 days after purchase. Retain receipt for proof of purchase.

Printed in CHINA. BEC110 OG / 123108 © Brew Express 2011
www.brewexpress.com
for customer service or technical service please call (866)-268-5953