Brigade BL-270HM User manual

BL-270HM Manual
(Support CVBS/AHD 720P/AHD 1080P)
Please refer to https://brigade-electronics.com/product-support-area/ for more information and
technical documents

Kit Contents
BL-270HM
2 Channel Mirror Monitor
BL-270HM-BKT
Dash mount bracket
BL-270HM-RC
IR Remote control
BL-270HM-PC
2CH Video Input, 2 x alarm trigger inputs,
Power and GND

Mirror Monitor
1. Power
2. Up
3. Menu
4. Down
5. Channel 1/ Channel 2
6. IR
Monitor Specification:
. Screen size: 7-inch new TFT panel
. Aspect Ratio: 10:9 image
. Input: 2-channel video input with 2 trigger cable inputs
. System: PAL and NTSC auto switching
. Resolution: 1024 x R.G.B x 600
. Brightness: 450cd/m2
. Power supply: 12-24V DC
. Built-in speaker
. Operation Temperature: -30℃~+70℃
. Storage Temperature: -40℃~+80℃.

Cable
Note: Channel 1 video has priority over Channel 2 video if these are
triggered at the same time.
Usual manual：
1. Power connected, GND to Negative；12-24V to positive。
2. AV1 - AV2 connect to camera 1 and camera 2。
3. Trigger AV1 - Trigger AV2 cables to trigger the video AV1、AV2。

BL-270HM

Remote Control
Menu Tree
Slider control
Power
Video select & slider control
Left and volume down
Right and volume up
Menu
View
Brightness：0-100
Saturation：0-100
Contrast：0-100
Hue：0-100
System
Reversing Line ：MODE 1(2/3)
Astern Delay ：3s/6s/9s
Language：English/Japanese/Chinese
Rotate：LU/RD
Version：Shows installed O/S/ Firmware version
Resolution：720P/1080P/CVBS PAL/CVBS N
Audio Switch：OFF/ON
Backlight Mode：OFF/ON
Default Setting
Image Mirror
[e-mail] www.brigade-electronics.com