Brightlink BL-WL-EXT200 User manual

BRIGHTLINK 200M HDMI WIRELESS EXTENDER WITH IR
PASSBACK
Model: BL-WL-EXT200
Operating Instructions
BRIGHTLINKAV.COM

Thank you for purchasing this product. For optimum performance and safety, please read the
instructions carefully and keep the manual for future reference.
Important safety notice
Please read below safety instructions carefully before installation and operation:
Please pay attention to all the warnings and hints on this device.
Do not expose this unit to rain, moisture and liquid.
Do not put any stuff into the device.
Do not repaire the device or open the enclosure without professional person guidence to avoid electronic
shock.
Make sure good ventilation openings to avoid product overheating damage.
Shut off power and make sure environment is safe before installation.
Do not plug-in/out the network cables and IR cables when it is in using to avoid cables damage.
Use DC5V only. Make sure the specification matched if using 3rd party DC adapters.
1.Introduction
This transmitter extends HDMI signal wirelessly from source device to display device up to 200meters with
the advanced application of HDBitT transport protocol and wireless technology. It requires no cables between
sender (TX) and receiver (RX) which makes the installation easy and clean.
Note:
1) Transmission distance will be different due to the environment.
2) Wall, brick or glass will shorten the signal cover range or cause big signal loss.
2.Features
1) Transmit HDMI signal from source device to display device up to 200meters wirelessly.
2) Support IR remote control function to control source device content from long distance.
3) No cable between sender(TX) and receiver(RX)
4) Easy and clean installation

3.Package contents
HDMI extender TX sender*1pcs HDMI extender RX receiver*1pcs DC5V3A power adapter*2pcs
IR blaster extension cable*1pcs IR receiver extension cable*1pcs User manual*1pcs
4.Installation Requirement
1. HDMI source device (DVD, PS3, Set top box, PC etc)
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
5.Panel description
1.HDMI Extender TX sender
1 Power led It lights when power is on
2 Data transmission led Led blinks slowly when it is building connection.
Led blinks fast when it is successfully connected and transmitting data.
3 Connection led It lights when wireless signal is well connected.
4 Power input Connect with DC5V3A power adapter
5 Reset Press reset button to restart the device
6 HDMI input Connect with HDMI source device
7IR blaster extension cable Connect with IR blaster extension cable. Please put the IR blaster close

interface to source device to best transmit the IR signal from receiver.
８Antenna Launch wireless signal
2.HDMI extender RX receiver
1 Power led It lights when power is on
2 Data transmission led Led blinks slowly when it is building connection.
Led blinks fast when it is successfully connected and transmitting data.
3 Connection led It lights when wireless signal is well connected.
4 Power input Connect with DC5V3A power adapter
5 Reset Press reset button to restart the device
6 HDMI output Connect with HDMI display device
7IR receiver extension
cable interface
Connect with IR receiver extension cable. Please make sure the remote
control is within the required range of IR receiver.
８Antenna Launch wireless signal
6.Connection
1). Connect HDMI input with HDMI source device and connect IR blaster extension cable with IR OUT interface of the
sender (TX).
2). Connect HDMI output with HDMI display device and connect IR receiver extension cable with IR IN interface..
3) Power on the device (power led lights) and it works.

Note:
When the wireless signal transmits through wall, glass or other obstacles, it will cause signal loss. Suggest
installing this device in good environment with few obstacles.
The external environment wireless signal interfere the transmission, such as micro waver, wireless mouse and
keyboard etc.
7.FAQ
Q: TV display “waiting for connection...” on the bottom right corner?
A: Please check if the power supply of TX (sender) and RX(receiver) is well connected and the power indicator led lights
on.
Q: TV display “Please check the TX input signal”?
A:1)please check if there is an HDMI signal input of sender TX
2) Try to connect the signal source directly to display device to see if there is signal output from source device or change
the signal source, HDMI cables and try again.
Q: Display not fluent and stable
A: 1) Please move the position of sender (TX) and receiver (RX) and make sure the device is within the required signal
range.
2) Click “reset” button on the RX/RX panel, reset and reconnect.
3) Remove other wireless signal disturbance and reduce the obstacles on the way.
8.Specification
Items Specification
HDMI signal Full compatible with HDCP
Transport protocol HDbitT
Support resolution 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@50/60Hz
IR remote control Support 20~60kHz IR remote device
Transmit distance 200m at 1080p@60Hz
Working temperature 0℃～60℃
Power supply DC5V/3A
Power consumption TX<8.5W RX<5.5 W
Enclosure material Metal
Product dimension 195.4(W)x137.5(D) x 30.8 (H) mm *2pcs
Weight TX：531g RX:528g
Color Black
Disclaimer
The product name and brand name may be registered trademark of related manufacturers.TM and ® may be

omitted on the user manual. The pictures on the user manual are just for reference, and there may be some
slight difference with the real products.
We reserve the rights to make changes without further notice to a product or system described herein to
improve reliability, function or design.