Brillian Technology 3080 User manual

www.brilliantechnology.com
1
Document Camera
USER MANUAL
Please read this manual carefully before operating the document camera and keep it for reference

www.brilliantechnology.com
2
PRECAUTIONS
NOTICES: PLEASE READ CAREFULLY BEFORE USE
Use the document camera under the rated electrical conditions.
Do not place the document camera on any unstable surface. It may fall and cause injures
or damages.
Do not place this device directly under sunlight or near heaters.
Do not place this device near water.
Keep the camera away from acid or alkali gas.
Do not place this document camera in humid, dusty, windy or vibrant locations.
The recommended operating environment is:
Temperature: 0ºC--45ºC (32ºF-114ºF)
Humidity: less than 75%
Always unplug BEFORE cleaning the device. Use a damp soft-cloth for cleaning. Do not
use volatile solvent.
When this equipment functions abnormally, such as smoke, smell, noise, immediately
unplug and call for professional assistance.
Unplug the document camera or shut off the power when not in use.

www.brilliantechnology.com
3
USER MANUAL.......................................................................................1
1. PARTS IDENTIFICATION.................................................................4
2. CONTROLPANEL..............................................................................5
3. INPUTS AND OUTPUTS ....................................................................6
4. REMOTE CONTROL .........................................................................7
5. CONNECTIONS...................................................................................9
5.1. COMPUTER CONNECTION ...........................................................................................9
5.2. VGA OUTPUT CONNECTION......................................................................................10
5.3. C-VIDEO OUTPUT CONNECTION..............................................................................10
5.4. S-VIDEO OUTPUT CONNECTION .............................................................................. 11
6. COMMUNICATE WITH COMPUTER..........................................11
6.1. CONTROL VIA RS232 ................................................................................................... 11
6.2 USB CAMERA.................................................................................................................15
7. FEATURES .........................................................................................19
LIGHT.....................................................................................................................................19
ZOOM IN AND ZOOM OUT ................................................................................................20
FOCUS ADJUSTMENT.........................................................................................................20
BRIGHTNESS ADJUSTMENT .............................................................................................20
WHITE BALANCE ADJUSTMENT .....................................................................................20
TEXT/PICTURE MODE........................................................................................................20
IMAGE FREEZE....................................................................................................................21
IMAGE MIRROR...................................................................................................................21
SPLIT SCREEN......................................................................................................................21
IMAGE SAVE.........................................................................................................................21
IMAGE RECALL ...................................................................................................................21
MULTIPLE INPUTS AND OUTPUTS ..................................................................................21
USB 2.0 PORT........................................................................................................................21
USB IMAGE CAPTURE AND VIDEO RECORDING.........................................................22
RS232 CONTROL..................................................................................................................22
8. SPECIFICATIONS.............................................................................22
9. TROUBLE-SHOOTING: ..................................................................23
10. PACKING LIST................................................................................24
11. TECHNICAL SUPPORT.................................................................24

www.brilliantechnology.com
4
1. PARTS IDENTIFICATION
1. Remote control IR receiver
2. Camera
3. LED light box
4. Upper mechanical arm
5. Main mechanical arm
6. Side panel
7. Back panel
8. Base unit
9. Control panel

www.brilliantechnology.com
5
2. CONTROL PANEL
1. POWER: Turn on/off the power.
2. HOME: Display the i-3080’s image via the VGA output.
3. LAMP: Turn on/off the LED light.
4. FREEZE: Freeze/unfreeze the image.
5.T/P: Switch the output image between the text mode and the picture mode.
6. SPLIT: Split screen, enable the comparison between the frozen image and the live image.
7. COMPUTER: Display the connected computer image.
8. VIDEO: Display the i-3080’s image via the C-Video or S-Video output.
9. BRIGHT+/-: Image brightness control.
10.PAGE DOWN: Saved image page down when the image recall mode is enabled.
11. AUTO: Carry out auto focus, color adjustment and white balance.
12. SAVE: Capture and save the current image.
13. RECAL: Image recall mode enabled, display the saved images.
14. FOCUS+/-: Adjust focus manually, focus far and focus near.
15. ZOOM+/-: Image zoom in and zoom out control.
In image recall mode:
1: Display the first image.
2: Display the second image.
3: Display the third image.
4: Display the fourth image.

www.brilliantechnology.com
6
3. INPUTS AND OUTPUTS
1. DC 12V: Power input.
2. RS 232: Serial port, to control the document camera by computer via this port.
3. AUDIO OUT: Audio output.
4. VGA OUT: VGA(RGB) signal output(15 pin D-SUB).
5. C-VIDEO: Composite video output.
6. S-VIDEO: S-Video output.
7. VGA IN: VGA (RGB) signal input(15 pin D-SUB).
8. AUDIO IN: Audio input.
9. USB: Capture image into a connected computer via the provided software.

www.brilliantechnology.com
7
4. REMOTE CONTROL
1. Save: Capture the image in display.
2. Recall: Image recall mode enabled, display the saved images.
3. Lamp: Turn on/off the LED light.
4. Split: Split screen, enable the comparison between the frozen image and the live image.
5. Page down: Saved image page down when the image recall mode is enabled.
6. Mirror: Display the vertically reversed image.
7. Freeze: Freeze/unfreeze the image.
8. T/P: Switch the output image between the text mode and the picture mode.
9. Red+/-:Image chroma control (red).
10. Blue+/-: Image chroma control (blue).

www.brilliantechnology.com
8
11. SXGA/XGA: Switch the output signal between the XGA and the SXGA resolution.
12. Home: Display the image via VGA output.
13. Sharp+/-:Image the sharpness control.
14. Auto: Carry out auto focus, color adjustment and white balance.
15. Computer: Activate the VGA input.
16. Video: Display the image via C-Video or S-Video output.
17. Zoom+/-: Image zoom in and zoom out control.
18. Focus+/-: Adjust focus manually, focus far and focus near.
19. Bright+/-: Image brightness control.
In image recall mode:
1: Display the first image.
2: Display the second image.
3: Display the third image.
4: Display the fourth image.

www.brilliantechnology.com
9
5. CONNECTIONS
5.1. COMPUTER CONNECTION

www.brilliantechnology.com
10
5.2. VGAOUTPUT CONNECTION
To RGB Input
To Audio Input
5.3. C-VIDEO OUTPUT CONNECTION
Audio Cable
Video Cable
To Audio Input
To Video Input

www.brilliantechnology.com
11
5.4. S-VIDEO OUTPUT CONNECTION
S-Video Cable
Audio Calbe
To Audio input
To S-Video in
6. COMMUNICATE WITH COMPUTER
6.1. CONTROLVIARS232
The i3080 can be controlled from a computer via the RS232 interface.
1. Create a folder on the hard drive, name it i-3080. Then copy the RS232 application that is on the
provided CD into this folder.
2. Connect the computer and the i-3080 with a RS232 cable, and then turn on the power of i-3080.
3. Open the RS232 folder and double click the RS232 software to run the install shield wizard.

www.brilliantechnology.com
12
Then you will see the software setup window:
Click Next>, you will see:

www.brilliantechnology.com
13
Select I accept the terms in the license agreement, click Next>, you will see:
Type the User name and Organization, click Next you will see:
Click Install, then you will see:

www.brilliantechnology.com
14
Click Finish to finish the installation.
4. Double click or click start->All Programs->Portable Series->Portable Series.exe to run
the RS232 software, you will see a tool bar:
The definition of each button is Zoom in, Zoom out,Auto focus, Functions, Minimize, Close.
Click Functions, you will see the following control panel.

www.brilliantechnology.com
15
6.2 USB CAMERA
You can capture images and videos on the i-3080 from a computer via a connected USB cable.
1. Connect the computer and the i-3080 with a USB cable and turn on the power of the i-3080.
2. Open My Computer and you will see a USB Video Device:
3. Double click USB Video Device, you will see the following image capture window:
To capture the video, please see the following steps:
1. Copy the USB software that is on the provided CD into the folder i-3080.
2. Open the USB folder and double click to run the USB capture application:

www.brilliantechnology.com
16
You will see the following window:
2. Please make sure the software is in the proper setting.
Make sure to click Devices->USB video device and Options->Preview.

www.brilliantechnology.com
17
3. Click File->Set Capture File, to set the captured file.
A. Set the location and the file name.
B. Set the file size.

www.brilliantechnology.com
18
4. Click OK to finish the setup, and then click Capture->Start capture to capture video.
4. You will see the following window, Click OK to start capture.

www.brilliantechnology.com
19
6. Click Capture->Stop Capture to stop
7. FEATURES
LIGHT
The i-3080 is an environmentally friendly product. It is RoHS compliant, which means it meets

www.brilliantechnology.com
20
the rigorous European Union’s requirements for restriction of the use of certain hazardous
substances in electrical and electronic equipment. The lighting box of i-3080 adopts eco-friendly,
low power consumption and long lasting LED lamps, which is cool to the touch and mercury
content free.
ZOOM IN AND ZOOM OUT
9x optical zoom combined with 8x seamless digital zoom, the i-3080 enables you to view the
finest details of any objects that are impossible to see with your naked eyes. The i-3080’s
advanced optical system features high speed auto focus capability that ensures instant auto focus
when you quickly zoom in and out of any object. You can also manually adjust focus to satisfy
any special viewing needs by pressing "ZOOM+"or "ZOOM－".
FOCUS ADJUSTMENT
When the i-3080 is turned on the focus automatically adjusts to the stage, it is not necessary to
readjust the focus if you are only working with flat materials (text, photos, etc.). Only 3D
objects require a focus adjustment. Press the “AUTO” button to auto focus. Press the "FOCUS+"
or "FOCUS-"button once to focus manually.
BRIGHTNESS ADJUSTMENT
If the image effect is not satisfactory, you can adjust the brightness to get a better image effect.
Use the “BRIGHT +” or “BRIGHT -” button to adjust the brightness. To increase the brightness,
press the “BRIGHT +” button. To decrease it, press the “BRIGHT -” button.
WHITE BALANCE ADJUSTMENT
Each time the lighting condition changes, the user should adjust the white balance of the CMOS.
Press the “AUTO” button to adjust the white balance automatically.
TEXT/PICTURE MODE
The text enhancement feature provides the option to improve the readability of the text by
improving the contrast of the text image via pressing the “T/P” button.