Bristan Kingsbury Wiring diagram

Installation Instructions & User Guide
Installation Instructions & User GuideInstallation Instructions & User Guide
Installation Instructions & User Guide
Kingsbury Monobloc Sink Mixer
Kingsbury Monobloc Sink Mixer Kingsbury Monobloc Sink Mixer
Kingsbury Monobloc Sink Mixer
Please keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement partsPlease keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement parts

ontents
ontents ontents
ontents Page
PagePage
Page
1. Introduction 03
2. Safety Note 03
3. Specification 03
4. Installation 04
5. Cleaning & Maintenance 05
6. Notes 06
. Bristan Guarantee 0
02

3. Specification
3. Specification3. Specification
3. Specification
Min. Max.
Operating pressure range (bar) 0.2 8.0
NOTE:- Nominally equal (balanced) inlet supply pressures are recommended for optimum performance.
1. Introduction
1. Introduction1. Introduction
1. Introduction
Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with
your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting
instructions have been created to give you all of the information you need and, if you need any further help, please
do not hesitate to give us a call on 0844 01 62 3.
2. Safety Note
2. Safety Note2. Safety Note
2. Safety Note
Please read these instruction thoroughly and retain for future use. All products manufactured and supplied by
Bristan are safe provided they are installed correctly, used correctly and receive regular maintenance in
accordance with these instructions.
These fittings need to be installed in accordance with and meet the requirements of the Water Supply (Water
Fittings) Regulations 1999 and Scottish Byelaws 2004.
Designed to comply with BS EN 200 for single taps/ combination taps for water systems of type 1 and 2 general
technical specifications and to be used within systems designed to BS 6 00.
BS 6 00 recommends the temperature of stored water should never exceed 65°C. A stored water temperature of
60°C is considered sufficient to meet all nominal requirements and will minimise the build up of lime scale in hard
water areas.
This mixer is suitable for use at all supply pressures.
If the fitting is installed at low pressure (tank fed), then the
minimum height from the outlet of the nozzle to the
underside of the cold water tank should be at least at least
2 metres to ensure adequate performance.
This mixer should be in stalled in compliance with the
Water regulations, where the supplies are unbalanced
i.e hot water from a cylinder tank and cold from the
mains. Approved check valves must be fitted in the
supply pipes, for further details contact your Local
Water Authority.
03

4. Installation
4. Installation4. Installation
4. Installation
1. Identify all the parts are present and correct before commencing installation.
2. Fit the mixer to the sink using the C plate fixing kit. The full rubber washer goes between the fitting and the
sink, the C shaped rubber and metal washer on the underside of the sink.
3. Fit the flexible inlet connections by HAND ONLY (DO NOT OVERTIGHTEN) to the fitting and connect the
hot and cold supplies.
3. Fully open both valves, letting them run for a few minutes to flush the system through.
5. Check all joints and connections for leaks
6. See page 6 for aftercare instructions.
Full Rubber Washer
Rubber Plate
Metal Plate
Fixing Nut
04

5. leaning & Maintenance
5. leaning & Maintenance5. leaning & Maintenance
5. leaning & Maintenance
Your fitting has a high quality finish and should be treated with care to preserve the visible surfaces.
All finishes will wear if not cleaned correctly. The only safe way to clean your product is to wipe with a soft damp
cloth. Stains can be removed using washing up liquid. All bathroom cleaning product (powders and liquids) will
damage the surface of your fitting, even the non-scratch cleaners.
NOTE:- Never use abrasive detergents or disinfectants or those containing alcohol, hydrochloric or phosphoric
acid.
We advise that your fitting is regularly serviced, particularly in hard water areas.
If the fitting begins to drip:
1. Turn off both water supplies.
2. Remove fitting head and valve.
3. Carefully clean the seating and rubber washer.
4. Replace the valve and then turn on the water supplies.
5.
If problem persists contact our helpline quoting the product code overleaf.
5.
If problem persists contact our helpline quoting the product code overleaf.
Bristan recommend E- loth for cleaning all of our bathroom & kitchen products.
Using just water, E-cloth gives a smear free, deep clean by breaking up and
holding dirt, which normal cloths leave behind. Order through your Bristan
stockist.
(ORDER ODE: E LOTH)
05

6. Notes
6. Notes6. Notes
6. Notes
Please use this space to add any comments you or your installer may have regarding the plumbing
system/installation of this product.
06

7. Bristan Guarantee
7. Bristan Guarantee7. Bristan Guarantee
7. Bristan Guarantee
Bristan offers solid guarantees to provide you with complete peace of mind.
Taps and Mixers
Taps and MixersTaps and Mixers
Taps and Mixers
5 year parts and 1 year labour*. Gold, painted and special finishes 3 years parts only.
All subject to proof of purchase.
Mixer Shower Valves
Mixer Shower ValvesMixer Shower Valves
Mixer Shower Valves
5 year parts. 5 year labour* (subject to registration), or 1 year with proof of purchase.
Gold, painted and special finishes 3 years parts only.
Pumps and Power Showers
Pumps and Power Showers Pumps and Power Showers
Pumps and Power Showers
2 year parts. 1 year labour* (subject to registration).
Electric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water HeatersElectric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water Heaters
2 year parts. 1 year labour* (subject to registration).
Accessories
AccessoriesAccessories
Accessories
5 year parts only. Includes bathrooms accessories, shower accessories (e.g. hoses, handsets and poles), wastes, WC levers and
light pulls. Gold, painted and special finishes 3 years parts only.
Sanitaryware
SanitarywareSanitaryware
Sanitaryware
5 year parts only. Subject to proof of purchase.
Shower Enclosures and Shower Trays
Shower Enclosures and Shower Trays Shower Enclosures and Shower Trays
Shower Enclosures and Shower Trays
10 year parts (subject to registration), or 2 years with proof of purchase. 1 year labour* (subject to registration), or 1 year with
proof of purchase.
Heated Towel Rails
Heated Towel RailsHeated Towel Rails
Heated Towel Rails
5 year parts only. Gold, painted and special finishes 3 years parts only. All subject to proof of purchase.
*Labour provided by an approved Bristan engineer. Guarantee only applies to products with a manufacturing fault. A deferred
payment will be necessary in order to secure any visits by our engineers which will be charged if the problem is found not
notnot
not to be a
manufacturing fault. If the fault is found to be down to a manufacturing error, the payment will be released and not charged
.
manufacturing fault. If the fault is found to be down to a manufacturing error, the payment will be released and not charged
.
This guarantee applies to products purchased within the United Kingdom or Republic of Ireland, but does not apply to products
used commercially.
The guarantee is only available to original purchasers who have proof of purchase.
The installation must allow ready access to all products for the purpose of inspection, maintenance or replacement.
Any part found to be defective during the above guarantee period will be replaced without charge, providing that the product has
been installed in accordance with the instructions, used as intended, and regularly serviced.
Servicing should be carried out at regular intervals of no more than 12 months and more frequently in hard water areas (heavy
lime scale) areas.
In the unlikely event that any problems are encountered with the product’s performance on installation, you must obtain
guidance/authorisation from our Customer Service Department, and be able to supply proof and date of purchase, before any
remedial action is taken.
The guarantee excludes general wear and tear and damage caused by accident, misuse or neglect, and does not cover the
following:
. Components that are subject to general wear and tear such as filters, seals, ‘O’ rings and washers etc.
· Damage caused by faulty installation
· Damage caused by lime scale or any waterborne debris
· Damage caused by inappropriate cleaning products (see user instructions)
· Damage caused by the use of non-Bristan parts
· The product being used for a purpose other than intended by the manufacturer.
In the interests of continuous product improvement Bristan reserves the right to alter specification as necessary.
If your product is out of its guarantee period, or you would like to extend the guarantee, then please see our extended warranty
offer.
07

This booklet covers product code
KG SNK , KG SNK G
Helpline
HelplineHelpline
Helpline
0844 701 6273
0844 701 62730844 701 6273
0844 701 6273
0844 701 6273
0844 701 62730844 701 6273
0844 701 6273
Bristan Group Limited
Birch oppice Business Park, Dordon, Tamworth, Staffordshire B78 1SG
A Masco ompany
Website: www.bristan.com
Telephone: [phone] Facsimile: 0844 701 6275
Email: [e-mail]
FI (KG SNK) – REV. D5