Broadata Communications Link Bridge LBC-24PI User manual

LBC-24PI
BCI reserves the right to make changes to the products described herein without
prior notice or consent. No liability is assumed as a result of their use or
application. All rights reserved.
©2017 Broadata Communications, Inc.
Link Bridge 24V HDBaseT
Power Inserter
TM


SAFETY INSTRUCTIONS AND
COMPLIANCE DECLARATIONS
PLEASE OBSERVE THE FOLLOWING SAFETY
PRECAUTIONS
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may
be damaged by electrical spikes, surges, electric shock, lightning
strikes, etc. Use of surge protection systems is highly recommended
in order to protect and extend the life of your equipment.
LBC-24PI User’s Manual
Link Bridge 24V HDBaseT Power Inserter
TM

TABLE OF CONTENTS
1.0 PRODUCT DESCRIPTION............................................................... 5
2.0 OPERATION CONTROLS AND FUNCTIONS................................... 6
2.1 FRONT PANEL.................................................................................. 6
2.2 REAR PANEL .......................................................................... 7
3.0 SPECIFICATIONS ............................................................................ 8
4.0 SERVICE PROCEDURE....................................................................9
4.1 REPLACEMENT POLICY ................................................................9
4.2 RETURN & REPAIR SERVICE............................................................9
5.0 LIMITED WARRANTY.......................................................................10
TM
LBC-24PI User’s Manual
Link Bridge 24V HDBaseT Power Inserter

FEATURES
•Insert24VpowerintoHDBaseTlink
•SupportsHDBaseTsignalbypass
•SupportsPowercascading
1.0 PRODUCT DESCRIPTION
LBC-24PI User’s Manual
Link Bridge 24V HDBaseT Power Inserter
TM

1.CAT5e/6/7 IN: Connect CAT5e/6/7 cable from a compatible
Transmitter.
2. DC 24V IN: Connect 24V DC power supply into the unit
with 3.5mm 2-pole Terminal Block connector and connect
the adaptor to an AC outlet.
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Front Panel
TM
LBC-24PI User’s Manual
Link Bridge 24V HDBaseT Power Inserter

1. POWER LED: This LED will illuminate when the power is
connected to power supply.
2. DC 24V OUT: Connect this slot to another compatible
Receiver for power cascading.
3. CAT5e/6/7 OUT: Connect CAT5e/6/7 cable from a compatible
Receiver.
2.2 Rear Panel
LBC-24PI User’s Manual
Link Bridge 24V HDBaseT Power Inserter
TM

3.0 SPECIFICATIONS
Power Inserter
Input One (1) HDBaseT Input port, RJ45
One (1) 24V Power Input port, terminal
block
Output One (1) HDBaseT Output port, RJ45
One (1) 24V Power Output port,
terminal block
Video Resolution 480i/576i/480P/576P/720P/1080i/108OP,
and 4Kx2K@60Hz, YUV 4:2:0
Physical
Dimension (W x D x H) 1.97” x 2.84” x 0.91”
Operating Temperature 0°C to 40°C
Storage Temperature -20°C to 60°C
TM
LBC-24PI User’s Manual
Link Bridge 24V HDBaseT Power Inserter

4.1 REPLACEMENT POLICY
Standard products found defective on arrival (DOA) will be
replaced, based on availability, within 24 to 48 hours anywhere
in the U.S. Please call Customer Service at 800-214-0222 for
information.
4.2 RETURN/REPAIR SERVICE
The LBC-24PI System contains no user serviceable components.
If you have a problem with your unit, please contact the Customer
Service Department. To facilitate our return/ repair processing
please contact Broadata Communications, Inc. to obtain a
Return Material Authorization (RMA). Please include the
following information:
• Productmodelnumber
• SerialNumber
• Completedescriptionofproblem
• Hardwareinstallationdescription
Broadata Communications, Inc.
2545 West 237th Street, Suite K
Torrance, CA 90505
1-800-214-0222
(310) 530-1416
(310) 530-5958 (Facsimile)
e-mail: [email protected]
Website: www.broadatacom.com
4.0 SERVICE PROCEDURE
LBC-24PI User’s Manual
Link Bridge 24V HDBaseT Power Inserter
TM

5.0 LIMITED WARRANTY
Broadata Communications, Inc. (BCI) warrants, for a period of one
year from date of shipment, each product sold shall be free from defects in
material and workmanship. BCI will correct, either by repair, or at BCI’s
election, by replacement, any said products that in our sole discretion
prove to be defective and are returned to the manufacturing location
within 30 days after such defect is ascertained. All warranties are limited
to defects arising under normal use and do not include malfunctions
or failure resulting from misuse, abuse, neglect, alterations, electrical
power problems, usage not in accordance with product instructions,
improper installation, or damage determined by BCI to have been
caused by the Buyer or repair made by a third party. Limited warranties
granted onproducts are to the initial customer end-user and are not
transferable.
OUR LIABILITY UNDER THIS WARRANTY SHALL IN ANY CASE BE
LIMITED TO THE INVOICE VALUE OF THE PRODUCT SOLD AND
BCI SHALL NOT BE LIABLE TO ANYONE FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES ARISING FROM THE USE OF ITS
PRODUCTS OR THE SALE THEREOF. We make NO WARRANTY AS
TO THE MERCHANTABILITY OF ANY GOODS, OR THAT THEY ARE
FIT FOR ANY PARTICULAR PURPOSE OR END APPLICATION NOR DO
WE MAKE ANY WARRANTY, EXPRESSED OR IMPLIED OTHER THAN
AS STATED ABOVE.
TM
LBC-24PI User’s Manual
Link Bridge 24V HDBaseT Power Inserter

LBC-24PI User’s Manual
Link Bridge 24V HDBaseT Power Inserter
TM

Broadata Communications, Inc.
2545 West 237th Street, Suite K
Torrance, CA 90505
1-800-214-0222
(310) 530-1416
(310) 530-5958 (Facsimile)
e-mail: [email protected]
Website: www.broadatacom.com
LBC-24PI
Table of contents
Popular Power Supply manuals by other brands

Norden
Norden NVS-AC10003BC user manual

StarTech.com
StarTech.com ATXPOW250PRO Instruction guide

Agilent Technologies
Agilent Technologies HP8648A Operating and service manual

Emcore
Emcore 10901G Operator's manual

Thorn
Thorn SENSALINK SENLPS LT Installation and commissioning instructions

GMI
GMI D5015SS instruction manual