Brocade Communications Systems ICX 7450 series Manual

53-1003899-02
8 April 2016
Brocade ICX 7450 Switch Hardware
Installation Guide
Supporting FastIron Software Release 8.0.40a
HARDWARE INSTALLATION GUIDE

Copyright © 2016, Brocade Communications Systems, Inc. All Rights Reserved.
Brocade, Brocade Assurance, the B-wing symbol, ClearLink, DCX, Fabric OS, HyperEdge, ICX, MLX, MyBrocade, OpenScript, VCS, VDX, Vplane, and
Vyatta are registered trademarks, and Fabric Vision is a trademark of Brocade Communications Systems, Inc., in the United States and/or in other
countries. Other brands, products, or service names mentioned may be trademarks of others.
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment
feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without notice, and
assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade sales office
for information on feature and product availability. Export of technical data contained in this document may require an export license from the United States
government.
The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the accuracy of this
document or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that accompany it.
The product described by this document may contain open source software covered by the GNU General Public License or other open source license
agreements. To find out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, and
obtain a copy of the programming source code, please visit http://www.brocade.com/support/oscd.

Brocade ICX 7450 Switch Hardware Installation Guide iii
53-1003899-02
Contents
Preface
Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Text formatting conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Command syntax conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Notes, cautions, and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Brocade resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Contacting Brocade Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
Brocade customers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Brocade OEM customers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Document feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
About This Document
Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Brocade ICX 7450 Overview
Brocade ICX 7450 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Brocade ICX 7450 customizable switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Views of the Brocade ICX 7450 switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Brocade ICX 7450 slot and Ethernet port numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Supported expansion modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Supported transceivers and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
QSFP+ 40GBase-SR-BD support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the Brocade ICX 7450
Unpacking the device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Installation and safety considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Electrical considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Environmental considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Location considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cabinet considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Recommendations for cable management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Installation tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installation precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
General precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Lifting precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Power precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DC-DC power source cautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installing the device on a desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installing the device in a rack or cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2-post rack mount installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4-post rack mount installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

iv Brocade ICX 7450 Switch Hardware Installation Guide
53-1003899-02
Connecting devices in a stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Stacking ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Stacking configuration requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Stacking cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Stack size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Stacking topologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Grounding the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Powering on the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Power supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Power supply usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using a second power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Installing and replacing a power supply unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installing an AC power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installing a DC power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Attaching a PC or terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connecting to the management port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Installing an SFP or SFP+ transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connecting network devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting a network device to a copper port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting a network device to a fiber port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Brocade ICX 7450 Operation
LED activity interpretation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Brocade ICX 7450 front-panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Brocade ICX 7450 rear-panel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
LED patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Diagnostic tests and monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Managing the Brocade ICX 7450
Temperature threshold levels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Hardware maintenance schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Replacing a fiber-optic transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Removing a fiber-optic transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cabling a fiber-optic transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the fiber-optic connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
FRU removal and replacement procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Replacing a power supply unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Determining the need to replace a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Time and items required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Replacing a power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Replacing fan trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Determining the need to replace a fan tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Time and items required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Installing or replacing the fan assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Replacing an expansion module or service module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Time and items required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Installing or replacing an expansion module or service module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Brocade ICX 7450 Switch Hardware Installation Guide v
53-1003899-02
Brocade ICX 7450 Specifications
System specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Weight and physical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Power supply specifications (per PSU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Power consumption (typical configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Power consumption (maximum configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Power consumption (modules) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Data port specifications (Ethernet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Serial port specifications (pinout - mini-USB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Serial port specifications (pinout RJ-45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Serial port specifications (protocol) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Memory specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Regulatory compliance (EMC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Regulatory compliance (safety) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Regulatory compliance (environmental) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Brocade ICX 7450 Regulatory Statements
USA (FCC CFR 47 Part 15 Warning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Industry Canada statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Europe and Australia (CISPR 22 Class A Warning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Germany (Noise Warning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Japan (VCCI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Korea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
China . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
BSMI statement (Taiwan). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Brocade ICX 7450 Cautions and Danger Notices
Cautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Danger notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

vi Brocade ICX 7450 Switch Hardware Installation Guide
53-1003899-02

Brocade ICX 7450 Switch Hardware Installation Guide vii
53-1003899-02
Preface
•Document conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
•Brocade resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
•Contacting Brocade Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
•Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Document conventions
The document conventions describe text formatting conventions, command syntax conventions, and important notice formats used in
Brocade technical documentation.
Text formatting conventions
Text formatting conventions such as boldface, italic, or Courier font may be used in the flow of the text to highlight specific words or
phrases.
Command syntax conventions
Bold and italic text identify command syntax components. Delimiters and operators define groupings of parameters and their logical
relationships.
Format Description
bold text Identifies command names
Identifies keywords and operands
Identifies the names of user-manipulated GUI elements
Identifies text to enter at the GUI
italic text Identifies emphasis
Identifies variables
Identifies document titles
Courier font Identifies CLI output
Identifies command syntax examples
Convention Description
bold text Identifies command names, keywords, and command options.
italic text Identifies a variable.
value In Fibre Channel products, a fixed value provided as input to a command option is
printed in plain text, for example, --show WWN.
[ ] Syntax components displayed within square brackets are optional.
Default responses to system prompts are enclosed in square brackets.

viii Brocade ICX 7450 Switch Hardware Installation Guide
53-1003899-02
Brocade resources
Notes, cautions, and warnings
Notes, cautions, and warning statements may be used in this document. They are listed in the order of increasing severity of potential
hazards.
NOTE
A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related information.
Brocade resources
Visit the Brocade website to locate related documentation for your product and additional Brocade resources.
You can download additional publications supporting your product at www.brocade.com. Select the Brocade Products tab to locate your
product, then click the Brocade product name or image to open the individual product page. The user manuals are available in the
resources module at the bottom of the page under the Documentation category.
To get up-to-the-minute information on Brocade products and resources, go to MyBrocade. You can register at no cost to obtain a user
ID and password.
Release notes are available on MyBrocade under Product Downloads.
White papers, online demonstrations, and data sheets are available through the Brocade website.
Contacting Brocade Technical Support
As a Brocade customer, you can contact Brocade Technical Support 24x7 online, by telephone, or by e-mail. Brocade OEM customers
contact their OEM/Solutions provider.
{ x| y| z} A choice of required parameters is enclosed in curly brackets separated by
vertical bars. You must select one of the options.
In Fibre Channel products, square brackets may be used instead for this purpose.
x| yA vertical bar separates mutually exclusive elements.
< > Nonprinting characters, for example, passwords, are enclosed in angle brackets.
... Repeat the previous element, for example, member[member...].
\ Indicates a “soft” line break in command examples. If a backslash separates two
lines of a command input, enter the entire command at the prompt without the
backslash.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to hardware, firmware,
software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to you. Safety
labels are also attached directly to products to warn of these conditions or situations.

Brocade ICX 7450 Switch Hardware Installation Guide ix
53-1003899-02
Document feedback
Brocade customers
For product support information and the latest information on contacting the Technical Assistance Center, go to
http://www.brocade.com/services-support/index.html.
If you have purchased Brocade product support directly from Brocade, use one of the following methods to contact the Brocade
Technical Assistance Center 24x7.
Brocade OEM customers
If you have purchased Brocade product support from a Brocade OEM/Solution Provider, contact your OEM/Solution Provider for all of
your product support needs.
•OEM/Solution Providers are trained and certified by Brocade to support Brocade® products.
•Brocade provides backline support for issues that cannot be resolved by the OEM/Solution Provider.
•Brocade Supplemental Support augments your existing OEM support contract, providing direct access to Brocade expertise.
For more information, contact Brocade or your OEM.
•For questions regarding service levels and response times, contact your OEM/Solution Provider.
Document feedback
To send feedback and report errors in the documentation you can use the feedback form posted with the document or you can e-mail the
documentation team.
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and completeness of this document.
However, if you find an error or an omission, or you think that a topic needs further development, we want to hear from you. You can
provide feedback in two ways:
•Through the online feedback form in the HTML documents posted on www.brocade.com.
•By sending your feedback to [email protected]om.
Provide the publication title, part number, and as much detail as possible, including the topic heading and page number if applicable, as
well as your suggestions for improvement.
Online Telephone E-mail
Preferred method of contact for nonurgent
issues:
•My Cases through MyBrocade
•Software downloads and licensing tools
•Knowledge Base
Required for Sev 1-Critical and Sev
2-High issues:
•Continental US: 1-800-752-8061
•Europe, Middle East, Africa, and Asia Pacific:
+800-AT FIBREE ([phone])
•For areas unable to access toll free number:
[phone]
•Toll-free numbers are available in many countries.
[email protected]
Please include:
•Problem summary
•Serial number
•Installation details
•Environment description

xBrocade ICX 7450 Switch Hardware Installation Guide
53-1003899-02
Document feedback

Brocade ICX 7450 Switch Hardware Installation Guide 1
53-1003899-02
About This Document
•Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
•What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Supported hardware and software
This document is specific to the Brocade ICX 7450 running FastIron release 8.0.40a.
What’s new in this document
The following table describes information added to this guide for FastIron software releases 8.0.40a.
TABLE 1 Summary of enhancements in FastIron release 8.0.40a
Feature Description Location
BiDi QSFP+ Added BiDi QSFP+ transceiver support. “QSFP+ 40GBase-SR-BD support” on page 11
Temperature threshold levels Added text on temperature threshold levels. “Temperature threshold levels” on page 45
Regulatory compliance Updated regulatory compliance information. “Regulatory compliance (safety)” on page 61
“Regulatory compliance (environmental)” on
page 61

2Brocade ICX 7450 Switch Hardware Installation Guide
53-1003899-02
What’s new in this document

Brocade ICX 7450 Switch Hardware Installation Guide 3
53-1003899-02
Brocade ICX 7450 Overview
•Brocade ICX 7450 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
•Views of the Brocade ICX 7450 switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
•Brocade ICX 7450 slot and Ethernet port numbering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
•Supported expansion modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
•Supported transceivers and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Brocade ICX 7450 features
The Brocade ICX 7450 is a high-density aggregation switch that offers 10/100 Mbps Ethernet, 1/10 Gigabit Ethernet (GbE), and 10/40
GbE line rates, low latency cut-through switching, and up to 336 Gbps throughput for campus LAN and classic Ethernet data center
environments.
The Brocade ICX 7450 switch features:
•Comprehensive support for a range of 1 GbE, 10 GbE, and 40 GbE optics (refer to the latest Brocade Optics Family Data Sheet)
•Dual redundant, hot-swappable power supplies available with intake or exhaust airflow
(250 W AC or 510 W DC for non-PoE switches, and 1000 W AC or 510 W DC for PoE switches)
•ICX 7450-24P and ICX 7450-48P copper ports support PoE, PoE+, High PoE, and PoH
•ICX 7450-48F SFP ports support 1 GbE transceivers
•ICX 7450-32ZP copper ports support PoE, PoE+, High PoE, and PoH
•1 GbE SFP module with four 10M/100M/1 GbE SFP ports
•10 GbE SFP+ module with four 1/10 GbE SFP+ ports
•10 GbE copper module with four 1/10 GbE RJ-45 ports
•Two 40 GbE QSFP+ or four 10 GbE SFP+ stacking ports (supporting stacking for up to twelve switches)
•Dual redundant, hot-swappable fan trays available with intake or exhaust airflow.
•One Gigabit Ethernet port (RJ-45) and one serial management port (mini-USB) to configure and manage the switch through the
CLI
•One USB port for the transfer of software and configuration files from an external disk drive
Brocade ICX 7450 customizable switches
The Brocade ICX 7450 base systems do not ship with power supplies, fans, stacking modules, or media expansion modules. Fans, power
supplies, and expansion modules are ordered separately to allow for building the system that meets your network needs. Table 1 lists the
available power supplies, fans, and expansion modules.
TABLE 1 SKUs for creating custom Brocade ICX 7450 switches
Part Description
ICX7400-4X1GF Brocade ICX 7450 4-port 10M/100M/1 Gbe SFP expansion module
ICX7400-4X10GF Brocade ICX 7450 4-port 1/10 GbE SFP+ uplink / stacking expansion module
ICX7400-4X10GC Brocade ICX 7450 4-port 1/10 GbE copper expansion module

4Brocade ICX 7450 Switch Hardware Installation Guide
53-1003899-02
Views of the Brocade ICX 7450 switch
Views of the Brocade ICX 7450 switch
Figure 1 shows the front view of the Brocade ICX 7450-24 switch.
FIGURE 1 Front view of the Brocade ICX 7450-24
ICX7400-1X40GQ Brocade ICX 7450 1-port 40 GbE QSFP+ data uplink / stacking module
RPS15-E Brocade ICX non-PoE 250 W AC PSU, power-supply-side exhaust (port-side intake) airflow
RPS15-I Brocade ICX non-PoE 250 W AC PSU, power-supply-side intake (port-side exhaust) airflow
RPS16-E Brocade ICX PoE+ 1000 W AC PSU, power-supply-side exhaust (port-side intake) airflow
RPS16-I Brocade ICX PoE+ 1000 W AC PSU, power-supply-side intake (port-side exhaust) airflow
RPS16DC-E Brocade ICX 510 W DC PSU, power-supply-side exhaust (port-side intake) airflow
RPS16DC-I Brocade ICX 510 W DC PSU, power-supply-side intake (port-side exhaust) airflow
ICX-FAN10-E Brocade ICX 7450 power-supply-side exhaust airflow fan (two fans required with two power supplies)
ICX-FAN10-I Brocade ICX 7450 power-supply-side intake airflow fan (two fans required with two power supplies)
CC-MINIUSB-RJ45 Console cable, male mini-USB to male RJ-45
ICX7450-RMK FRU, Rack mount kit, 2-post, ICX 7450
XBR-R000295 FRU, Universal rack mount kit, 4-post 24-32-inch depth rack, DX6740T/VDX6740T-1G
PCEURO Power Cord for RPS15/16, European version
PCUK Power Cord for RPS15/16, United Kingdom version
PCAUS Power Cord for use in Australia
PCJAPAN Power Cord for RPS15/16, Japan version
PCCHINA2-IEC309 Power Cord, China, IEC309 TO C13, 10A, 250V
PCSWISS-C1312G-HF Power Cord, Swiss, SEV1011 TO C13, 10A, 250V, halogen free
PCINDIA 6-foot AC power cord for India
1 System LEDs 2 Mini-USB console port
3 Media/Stacking module LEDs 4 Reset button
5 Stack unit ID display 6 10/100/1000Base-T RJ-45 ports 1/1/1 - 1/1/24
7 Management port (RJ-45) 8 SFP/SFP+ (1/2/1 - 1/2/4) & QSFP+ (1/2/1)
9 USB port (for flash drive)
TABLE 1 SKUs for creating custom Brocade ICX 7450 switches (Continued)
Part Description

Brocade ICX 7450 Switch Hardware Installation Guide 5
53-1003899-02
Views of the Brocade ICX 7450 switch
Figure 2 shows the front view of the Brocade ICX 7450-24P switch.
NOTE
PoE/PoE+ power is available to ports 1-24. High PoE/PoH is limited to ports 1-8.
FIGURE 2 Front view of the Brocade ICX 7450-24P
Figure 3 shows the front view of the Brocade ICX 7450-32ZP switch.
NOTE
PoE/PoE+ power is available to ports 1-32. High PoE/PoH is limited to ports 1-8.
FIGURE 3 Front view of the Brocade ICX 7450-32ZP
1 System LEDs 2 Mini-USB console port
3 Media/Stacking module LEDs 4 Reset button
5 Stack unit ID display 6 10/100/1000Base-T RJ-45 ports 1/1/1 - 1/1/24
7 Management port (RJ-45) 8 SFP/SFP+ (1/2/1 - 1/2/4) & QSFP+ (1/2/1)
9 USB port (for flash drive)
1 System LEDs 2 Mini-USB console port
3 Media/Stacking module LEDs 4 Reset button
5 Stack unit ID display 6 10/100/1000Base-T RJ-45 ports 1/1/1 - 1/1/24
7 Management port (RJ-45) 8 100M/1G/2.5GBase-T RJ-45 ports 1/1/25 - 1/1/32
9 USB port (for flash drive) 10 SFP+ ports 1/2/1 - 1/2/4

6Brocade ICX 7450 Switch Hardware Installation Guide
53-1003899-02
Views of the Brocade ICX 7450 switch
Figure 4 shows the front view of the Brocade ICX 7450-48 switch.
FIGURE 4 Front view of the Brocade ICX 7450-48
Figure 5 shows the front view of the Brocade ICX 7450-48P switch.
NOTE
PoE/PoE+ power is available to ports 1-48. High PoE/PoH is limited to ports 1-8.
FIGURE 5 Front view of the Brocade ICX 7450-48P
1 System LEDs 2 Mini-USB console port
3 Media/Stacking module LEDs 4 Reset button
5 Stack unit ID display 6 10/100/1000Base-T RJ-45 ports 1/1/1 - 1/1/48
7 Management port (RJ-45) 8 SFP+ ports 1/2/1 - 1/2/4
9 USB port (for flash drive)
1 System LEDs 2 Mini-USB console port
3 Media/Stacking module LEDs 4 Reset button
5 Stack unit ID display 6 10/100/1000Base-T RJ-45 ports 1/1/1 - 1/1/48
7 Management port (RJ-45) 8 SFP+ ports 1/2/1 - 1/2/4
9 USB port (for flash drive)

Brocade ICX 7450 Switch Hardware Installation Guide 7
53-1003899-02
Brocade ICX 7450 slot and Ethernet port numbering
Figure 6 shows the front view of the Brocade ICX 7450-48F switch.
FIGURE 6 Front view of the Brocade ICX 7450-48F
Figure 7 shows the rear view of the Brocade ICX 7450 switch.
FIGURE 7 Rear view of the Brocade ICX 7450
Brocade ICX 7450 slot and Ethernet port numbering
Many CLI commands require users to enter port numbers as part of the command syntax, and many show command outputs display
port numbers. The port numbers are entered and displayed in stack-unit/slot number/port number format.
1 System LEDs 2 Mini-USB console port
3 Media/Stacking module LEDs 4 Reset button
5 Stack unit ID display 6 SFP port LEDs 1/1/1 - 1/1/48
7 Management port (RJ-45) 8 SFP+ ports 1/2/1 - 1/2/4
9 USB port (for flash drive)
1 Grounding terminal 2 Fan tray 1
3 Fan tray 2 4 Power supply unit 2
5 Uplink / Stacking module 4 6 Power supply unit 1
7 Uplink / Stacking module 3

8Brocade ICX 7450 Switch Hardware Installation Guide
53-1003899-02
Brocade ICX 7450 slot and Ethernet port numbering
The Brocade ICX 7450 contains the following slots and Ethernet ports:
•Slot 1 and Slot 2 are located on the front of the Brocade ICX 7450-24 and ICX 7450-24P devices. Slot 1 contains 1 GbE RJ-45
ports 1/1/1 through 1/1/24, with odd port numbers on the top row and port 1/1/1 on the left. Slot 2 contains 1/10 GbE SFP+ ports
1/2/1 and 1/2/3 on the top row (left to right), and ports 1/2/2 and 1/2/4 on the bottom row (left to right). Refer to the following
figure.
FIGURE 8 Brocade ICX 7450-24 and ICX 7450-24P slot numbering
•Slot 1 and Slot 2 are located on the front of the Brocade ICX 7450-32ZP devices. Slot 1 contains 1 GbE RJ-45 ports 1/1/1 through
1/1/24 and 2.5 GbE RJ-45 ports 1/1/25 through 1/1/32, with odd port numbers on the top row and port 1/1/1 on the left. Slot 2
contains 1/10 GbE SFP+ ports 1/2/1 and 1/2/3 on the top row (left to right), and ports 1/2/2 and 1/2/4 on the bottom row (left to
right). Refer to the following figure.
FIGURE 9 Brocade ICX 7450-32ZP slot numbering
•Slot 1 and Slot 2 are located on the front of the Brocade ICX 7450-48 and ICX 7450-48P devices. Slot 1 contains 1 GbE RJ-45
ports 1/1/1 through 1/1/48, with odd port numbers on the top row and port 1/1/1 on the left. Slot 2 contains 1/10 GbE SFP+ ports
1/2/1 and 1/2/3 on the top row (left to right), and ports 1/2/2 and 1/2/4 on the bottom row (left to right). Refer to the following
figure.
FIGURE 10 Brocade ICX 7450-48 and ICX 7450-48P slot numbering
1 Slot 1 – 1GBase-T RJ-45 ports 1/1/1 - 1/1/24 2 Slot 2 – SFP+ ports 1/2/1 - 1/2/4
1 Slot 1 – 1GBase-T RJ-45 ports 1/1/1 - 1/1/32 2 Slot 2 – SFP+ ports 1/2/1 - 1/2/4
1 Slot 1 – 1GBase-T RJ-45 ports 1/1/1 - 1/1/48 2 Slot 2 – SFP+ ports 1/2/1 - 1/2/4

Brocade ICX 7450 Switch Hardware Installation Guide 9
53-1003899-02
Supported expansion modules
•Slot 1 and Slot 2 are located on the front of the Brocade ICX 7450-48F device. Slot 1 contains 1 GbE SFP ports 1/1/1 through
1/1/48, with odd port numbers on the top row and port 1/1/1 on the left. Slot 2 contains 1/10 GbE SFP+ ports 1/2/1 and 1/2/3 on
the top row (left to right), and ports 1/2/2 and 1/2/4 on the bottom row (left to right). Refer to the following figure.
FIGURE 11 Brocade ICX 7450-48F slot numbering
•Slot 3 is located on the rear of the Brocade ICX 7450 switch and with a single-port module installed contains 40 GbE QSFP+
stacking/data port 1/3/1. With a 4-port module installed, Slot 3 contains 1/10 GbE SFP+ ports 1/3/1 and 1/3/3 on the top row (left
to right), and ports 1/3/2 and 1/3/4 on the bottom row (left to right). Refer to Figure 12.
•Slot 4 is also located on the rear of the Brocade ICX 7450 switch and with a single-port module installed contains 40 GbE
QSFP+ stacking/data port 1/4/1. With a 4-port module installed, Slot 4 contains 1/10 GbE SFP+ ports 1/4/1 and 1/4/3 on the top
row (left to right), and ports 1/4/2 and 1/4/4 on the bottom row (left to right). Refer to Figure 12.
FIGURE 12 Brocade ICX 7450 rear slot numbering
Supported expansion modules
A 4-port 1 GbE SFP expansion module can be installed in the slots shown in Table 2 on page 10 and Table 4 on page 10. The expansion
module supports 1 GbE optics (refer to the Brocade Optics Family Data Sheet).
A 4-port 1/10 GbE SFP+ expansion module can be purchased and installed in the slots shown in Table 2 on page 10 and Table 4 on
page 10. The expansion module supports 1 GbE and 10 GbE optics (refer to the Brocade Optics Family Data Sheet).
A 4-port 1/10 GbE copper expansion module can be installed in the slots shown in Table 2 on page 10 and Table 4 on page 10. The
expansion module supports 1 GbE and 10 GbE copper wired connections.
A 1-port 40 GbE QSFP+ expansion module can be installed in the slots shown in Table 2 on page 10 and Table 4 on page 10. The
expansion module supports 40 GbE optics. This module can be used for data uplink or stacking.
Modules are supported in slots where “Yes” is indicated.
1 Slot 1 – SFP ports 1/1/1 - 1/1/48 2 Slot 2 – SFP+ ports 1/2/1 - 1/2/4
1 Slot 3 – 40 GbE QSFP+ stacking/data port 1/3/1
or 1/10 GbE SFP+ data ports 1/3/1 - 1/3/4
2 Slot 4 – 40 GbE QSFP+ stacking/data port 1/4/1
or 1/10 GbE SFP+ data ports 1/4/1 - 1/4/4

10 Brocade ICX 7450 Switch Hardware Installation Guide
53-1003899-02
Supported expansion modules
Instructions for installing or replacing an expansion module or service module are described in “Replacing an expansion module or service
module” on page 50.
TABLE 2 Brocade ICX 7450-24 and 24P expansion slots and supported media modules
Module Slot 2 Slot 3 Slot 4
ICX7400-4X1GF 4X1G 4X10M/100M 4X1G 4X100M 4X1G 4X100M
Yes Yes No No No No
ICX7400-4X10GF 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G
Yes Yes Yes Yes Yes Yes
ICX7400-4X10GC 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G
Yes Yes Yes Yes Yes Yes
ICX7400-1X40GQ 40G 4X10G 40G 4X10G 40G 4X10G
Yes No Yes No Yes No
TABLE 3 Brocade ICX 7450-32ZP expansion slots and supported media modules
Module Slot 2 Slot 3 Slot 4
ICX7400-4X10GF 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G
Yes Yes Yes Yes Yes Yes
ICX7400-4X10GC 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G
Yes Yes Yes Yes Yes Yes
ICX7400-1X40GQ 40G 4X10G 40G 4X10G 40G 4X10G
No No Yes No Yes No
TABLE 4 Brocade ICX 7450-48, 48P and 48F expansion slots and supported media modules
Module Slot 2 Slot 3 Slot 4
ICX7400-4X1GF 4X1G 4X10M/100M 4X1G 4X100M 4X1G 4X100M
Yes Yes No No No No
ICX7400-4X10GF 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G
Yes Yes Yes Yes Yes Yes
ICX7400-4X10GC 4X10G 4X1G 4X10G 4X1G 4X10G 4X1G
Yes Yes Yes Yes Yes Yes
ICX7400-1X40GQ 40G 4X10G 40G 4X10G 40G 4X10G
No No Yes No Yes No