Brocade Communications Systems SilkWorm 24000 User manual

The Brocade SilkWorm 24000 Director provides
a highly reliable and intelligent solution for
enterprise-class Storage Area Networks (SANs)
in mission-critical environments.
With state-of-the-art performance
and enhanced scalability for both
open system and IBM zSeries server
enterprise SAN environments, the
Brocade®SilkWorm®24000 Director
provides unique capabilities to meet
demanding mission-critical require-
ments. It scales non-disruptively
from 32 to as many as 128 concur-
rently active 2 Gbit/sec full-duplex
ports in a single domain or two
domains of up to 64 ports each. In
addition, it offers improved perform-
ance and the potential to upgrade to
higher-speed connectivity in the
future.The SilkWorm 24000 also
leads the industry in power and
cooling efficiency, helping to reduce
total cost of ownership.
With its intelligent fourth-generation
ASIC, the SilkWorm 24000 provides
a reliable foundation for core-to-edge
SANs, enabling fabrics capable of
supporting thousands of hosts and
storage devices (see Figure 1).Whether
used as a core building block for an
enterprise fabric or as a standalone
director, the SilkWorm 24000 is a
reliable, high-availability solution.These
capabilities make it ideal for enterprise
management and high-volume trans-
action processing applications such as
ERP and data warehousing, as well
as data backup, remote mirroring,
and high-availability clustering.
The SilkWorm 24000 is designed to
integrate with heterogeneous envi-
ronments that include IBM zSeries
server and open platforms with
multiple operating systems such as
Microsoft Windows, Linux, Solaris,
HP-UX, AIX, and i5/OS. As a result,
Brocade-based SANs can help serve
as the foundation for implementing
utility computing and Information
Lifecycle Management (ILM).
A High-Port-Density, Multiprotocol
Director for Enterprise SANs
Highlights
• Delivers up to 128 ports in a single
domain and a 14U enclosure with up
to 384 ports in a single rack, facilitat-
ing more easily managed SAN fab-
rics with thousands of ports
• Meets ultra-high-availability require-
ments with redundant, hot-pluggable
components, no single points of
failure, non-disruptive software
upgrades, and hot code activation
• Provides FICON®support for IBM
zSeries server environments, includ-
ing intermix mode on a port-by-port
basis, cascaded FICON fabrics,
1 and 2 Gbit/sec FICON speeds,
and CUP support
• Increases performance through reduced
latency and Brocade Inter-Switch Link
(ISL) Trunking
• Leverages intelligent Brocade SAN
management and security tools to
increase operational efficiency and
maximize SAN investments
• Protects investments by enabling
upgrade paths to future technologies,
increased port speeds, IP connectivity,
and more
SILKWORM 24000 DIRECTOR
SILKWORM SWITCH FAMILY

ULTRA-HIGH AVAILABILITY THROUGHOUT
THE FABRIC
The core-to-edge SAN model features
redundancy within the director as well as
a high-availability network approach for
the entire fabric.The ultra-high-availability
features of Brocade Fabric OS®help provide
a SAN infrastructure capable of delivering
continuous overall system availability with
features that include:
• Non-disruptive software upgrades and
hot code activation
• Dual-redundant control processors with
stateful failover
• Redundant, hot-swappable components and
redundant power and cooling subsystems
• Continuous monitoring of environmental
components
• Power-On Self-Test (POST), online/offline
diagnostics, and per-port statistics
• Error detection and fault isolation facilities
• Call-home capabilities to provide remote
notification of system events
A NEW LEVEL OF SAN SECURITY
To help protect valuable information, the
SilkWorm 24000 supports Brocade Secure
Fabric OS®, the most comprehensive fabric-
based security platform available. Based on
the latest networking security technology,
Secure Fabric OS addresses a wide variety
of vulnerabilities within the SAN fabric and
helps prevent downtime due to human error.
INDUSTRY-LEADING PERFORMANCE
With a fully non-blocked architecture
supporting 128 ports concurrently active
at 2 Gbit/sec full-duplex, the SilkWorm
24000 supports the most demanding SAN
applications at the core of large SANs. It
employs a multistage shared memory
architecture that reduces latency in port-to-
port transfers to 2.1 microseconds or less.
To provide even higher performance,
Brocade ISL Trunking with 2 Gbit/sec
blades combines up to four ISLs between
a pair of switches into a single, logical
high-speed trunk running at up to
8 Gbit/sec.With 4 Gbit/sec blades, an
ISL trunk can include up to eight ports for
as much as 32 Gbit/sec of data throughput.
SILKWORM 24000 DIRECTOR
OS/400
i5/OS
Data
Storage
Entry-level
Storage
Data
Storage
Midrange
Storage
Data
Storage
SilkWorm 24000
Directors
SilkWorm Edge
Fabric Switches
High-end
Storage
HP-UX
AIX
Linux
Windows
Server
Solaris
High-end
Storage
z/OS
Four 2 Gbit/sec links form a
single 8 Gbit/sec trunk group
Figure 1. A SilkWorm 24000
core fabric surrounded by
SilkWorm edge switches enables
cost-effective, highly scalable
enterprise SANs.

In addition, exchange-based Dynamic
Path Selection (DPS) optimizes fabric-
wide performance and load balancing
by automatically routing data to the
most efficient available path in the
fabric. DPS augments ISL Trunking to
provide more effective load balancing
in certain configurations, such as routing
data between multiple trunk groups
for higher availability.
To support disaster recovery and busi-
ness continuance operations, the
SilkWorm 24000 with new 4 Gbit/sec
blades enables unprecedented distances
between servers and storage devices.
Support for distances up to 500 kilo-
meters at 1 Gbit/sec and 100 kilome-
ters at 4 Gbit/sec at full bandwidth
facilitates high-performance, long-
distance SAN solutions for data
replication and business continuance.
INTELLIGENT SAN MANAGEMENT
AND MONITORING
The SilkWorm 24000 leverages Fabric
OS, the embedded operating system,
to centralize SAN management for
greater efficiency.This approach enables
heterogeneous device connectivity, auto-
matic data routing, self-healing capabili-
ties, and scalable connectivity options.
To simplify daily SAN management,
organizations can utilize a command line
interface for automated scripting or the
GUI-based Brocade Web Tools utility.
Organizations can also use Brocade
Advanced Performance Monitoring to
improve SAN performance tuning,
resource optimization, and administrator
productivity. Moreover, the Brocade
Fabric Access API integrates with
popular third-party storage management
applications, enabling organizations to
continue using their storage manage-
ment tools of choice.
FICON SUPPORT FOR IBM ZSERIES
SERVER ENVIRONMENTS
The SilkWorm 24000 supports the
FICON protocol for IBM zSeries server
environments, enabling organizations
to run both open systems Fibre Channel
and FICON traffic in intermix mode
on a port-by-port basis within a single
director.The Brocade FICON imple-
mentation also supports cascaded
FICON fabrics and both 1 and 2
Gbit/sec FICON speeds, as well as the
CUP in-band management protocol
for use with SA/390, DCM, or RMF
monitoring platforms.
UPGRADE PATHS FOR
INVESTMENT PROTECTION
To help protect existing technology
investments, the SilkWorm 24000 pro-
vides backward and forward compati-
bility with SilkWorm entry, midrange,
and director offerings. Organizations
can upgrade existing SilkWorm 12000
directors by replacing the port cards
and control processors, and can intermix
SilkWorm 12000 and SilkWorm 24000
blades in supported configurations.
In addition, the SilkWorm 24000 is
designed to support non-disruptive
addition of 4 Gbit/sec Fibre Channel
blades for performance and distance
benefits. These capabilities help
“future-proof ” the SilkWorm 24000
for years to come. (For specific
SilkWorm 24000 upgrade options,
contact an authorized Brocade Partner
or visit www.brocade.com.)
MAXIMIZING SAN INVESTMENTS
Brocade and its partners offer complete
SAN solutions to meet a wide range of
technology and business requirements.
These solutions include education and
training, support, service, and profes-
sional services to help optimize SAN
investments. For more information,
contact an authorized Brocade sales
partner or visit www.brocade.com.
SILKWORM SWITCH FAMILY
SILKWORM 24000 DIRECTOR SPECIFICATIONS
Systems Architecture
Fibre Channel ports 128 ports, universal (E, F, and FL); one domain per
chassis at up to 128 ports or two domains per chassis
at up to 64 ports each; up to eight 16-port Fibre
Channel modules; up to 384 ports per 42U rack
Control processor Redundant (active/standby) control processor modules
Scalability Full fabric architecture 239 switches maximum
Certified maximum Combination of 56 switches, 19 hops; larger fabrics
certified as required; consult Brocade or OEM SAN
design documents for configuration details
Interoperability Any SilkWorm 2000 family switch, SilkWorm 3000
family switch, SilkWorm 4000 family switch, SilkWorm
200E, SilkWorm 12000, and SilkWorm 48000
Performance 2 Gbit/sec blades: 1.063 Gbit/sec line speed (full
duplex); 2.125 Gbit/sec line speed (full duplex);
auto-sensing of 1 and 2 Gbit/sec port speeds;
optionally programmable to fixed port speed;
speed-matching between 1 and 2 Gbit/sec ports
4 Gbit/sec blades: 1.063 Gbit/sec line speed (full
duplex); 2.125 Gbit/sec line speed (full duplex);
4.25 Gbit/sec line speed (full duplex); auto-sensing
of 1, 2, and 4 Gbit/sec port speeds; optionally
programmable to fixed port speed; speed-matching
between 1, 2, and 4 Gbit/sec ports
ISL Trunking 2 Gbit/sec blades: Up to four 2.125 Gbit/sec ports
per ISL trunk; up to 8.5 Gbit/sec per ISL trunk
4 Gbit/sec blades: Up to eight 4.25 Gbit/sec ports
per ISL trunk; up to 32 Gbit/sec per ISL trunk

© 2005 Brocade Communications Systems, Inc.All Rights Reserved. 5/05 GA-DS-659-02
Brocade, the Brocade B weave logo, Fabric OS, Secure Fabric OS, and SilkWorm are registered trademarks of Brocade Communications Systems, Inc., in the United States
and/or in other countries. FICON is a registered trademark of IBM Corporation in the U.S. and other countries.All other brands, products, or service names are or may
be trademarks or service marks of, and are used to identify, products or services of their respective owners.
Notice:This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment, equipment feature, or
service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without notice, and assumes no responsibility for its
use.This informational document describes features that may not be currently available. Contact a Brocade sales office for information on feature and product availability.
Export of technical data contained in this document may require an export license from the United States government.
Systems Architecture (continued)
Aggregate bandwidth 512 Gbit/sec end to end
Switch latency <2.1 µsec any port to any port at 2 Gbit/sec,
cut-through routing
Maximum frame size 2112-byte payload
Frame buffers 2 Gbit/sec blades: 108 per 4-port group, dynamically
allocated
4 Gbit/sec blades: 1024 per blade, dynamically
allocated up to 255 per port
Classes of service Class 2, Class 3, Class F (inter-switch frames)
Port types FL_Port, F_Port, and E_Port; self-discovery based
on switch type (U_Port); optional port type control
Data traffic types Fabric switches supporting unicast, multicast
(255 groups), and broadcast
Media types Small Form-factor Pluggable (SFP) media; short-wave
up to 500 meters (1640 feet); long-wave up to 10
kilometers (6.2 miles); extended long-wave up to
100 km (62.1 mi); distance depends on fiber optic
cable and port speed
Fabric services Simple Name Server; Registered State Change
Notification (RSCN); Alias Server (multicast);
Brocade Advanced Zoning, FICON Control Unit Port
(CUP), Web Tools, Fabric Watch, Extended Fabrics,
Remote Switch, ISL Trunking, and Advanced
Performance Monitoring
High Availability
Chassis power Two AC-DC power supply modules, 2N redundancy
Cooling Three blower assembly modules (two operational required)
Management
Management software Telnet; RADIUS; SNMP (FE MIB, FC Management MIB);
supported Web Tools; Fabric Watch; third-party applications
utilizing Brocade Fabric Access API
Management access 10/100 Ethernet (RJ-45), in-band over Fibre Channel
(requires fabric); two serial ports (DB-9) per control
processor module
Diagnostics POST and embedded online/offline diagnostics
Mechanical Specifications
Enclosure Rear panel-to-door airflow
Width 43.74 cm (17.22 in)
Height 61.24 cm (24.11 in) for 14U
Depth 70.90 cm (27.90 in) without door
74.20 cm (29.20 in) with door
System weight 88 to 96 kg (193 to 212 lb)
Environment
Temperature Operating: 0° C to 40° C (50° F to 104° F)
Non-operating: -25° C to 70° C (-13° F to 158° F)
Humidity Operating: 5% to 85% non-condensing at 40° C (104° F)
Altitude Up to 3000 meters (9800 feet)
Shock Operating: 20G, 6 ms duration, half-sine
Vibration Operating: 0.5G p-p, 5–500 Hz
Non-operating: 2.0G, 5–500 Hz
Heat dissipation 740 W, 2525 BTU/hr fully loaded
Power
Supported power range Nominal: 200 to 240 VAC nominal, 5.0 A, single phase
Operating: 180 to 264 VAC auto-sensing
Maximum 2300 Volt-Amps
Maximum 12 Amps
In-rush current 40 Amps maximum, peak
Frequency 47 to 63 Hz
Regulatory Compliance
Country/Region Safety EMI/EMC
Canada CSA 60950 ICES 003 Class A
United States UL 60950 FCC Part 15 Class A
Japan IEC60950 VCCI Class A ITE
European Community EN60950 EN55022 Level A
TUV, NEMKO EN55024
Australia/New Zealand AS/NZS 3548 Class A
International IEC 60950 CISPR 22 Class A
SILKWORM 24000 DIRECTOR
Corporate Headquarters
San Jose, CA USA
T: [phone]
[e-mail]
European and Latin American
Headquarters
Geneva, Switzerland
T: [phone]
[e-mail]
Asia Pacific Headquarters
Singapore
T: [phone]
[e-mail]
SILKWORM 24000 DIRECTOR SPECIFICATIONS (CONTINUED)
For information about supported SAN standards, visit
www.brocade.com/sanstandards