Broil King KEG 911050 Series User manual

1
MODEL: 911050 / 2000 SERIES
READ ME FIRST
UNPACKING & ASSEMBLY INSTRUCTIONS
911050 / 2000 Series
Tools Required
• Phillips head screw driver
Approximate Assembly Time
20 minutes

2
MODEL: 911050 / 2000 SERIES
PARTS INVENTORY FOR YOUR BROIL KING KEG®
2
3
4
5
5
5
6
7
8
9
9
10
10
11
12
1
13
15
14
16
5415 16
14
ACTUAL SIZE
M5 x 55
(Qty:10)
M5 x 38
(Qty:2)
M8 x 20
(Qty:8) M6 x 15
(Qty:8) Washer
(Qty:8)
The only tools you will need:
• Phillips head screw driver
• ½inch or 13mm wrench
LINE ITEM QTY PART NAME
1 1 Grill Body
2 1 Temperature Gauge
3 1 Lid Handle
4 2 Handle Screws M5 x 38
5 10 Handle Screws M5 x 55
6 1 Cast Iron Cooking Grate
7 1 Charcoal Grate
8 1 Fire Bowl
9 2 Side Handles
10 2 Handle Gaskets
11 4 Legs
12 1 Hoop
13 4 Hoop Brackets
14 8 Leg Screws
15 8 Bracket Screws
16 8 Leg Washer

3
MODEL: 911050 / 2000 SERIES
BROIL KING KEG®ASSEMBLY INSTRUCTIONS
M5 x 38
(top screws)
M5 x 55
(bottom screws)
bottle opener
tabs
Handle
gasket
FRONT HANDLE SIDE HANDLE
M5 x 55
Proper assembly of your new BROIL KING KEG®will only require a Phillips head screw driver, a ½ inch or 13mm wrench and a buddy (for lifting). Follow
the steps outlined below and it should take approximately 20 minutes to complete. Refer to illustration on page 2 for part(s) identification and placement
positions.
NOTE: Hand tighten all screws during placement and securely tighten with screwdriver when all parts of that assembly are in place.
STEP 1: Unlock clasp and open the Keg’s lid. Remove
and unpack all contents and check against parts
inventory list.
STEP 2: Attachfront handlewithPhillips headscrewdriver.
M5 x 55 screws go in the bottom holes with the bottle
opener tabs. M5 x 38 screws go in the top holes. Silicone
gaskets install behind handle (two places).
STEP 3: Attach side handles (2) using 4 (M5 x 55)
screws. Use Phillips head screwdriver. Note the
“Bottom”written on the handle and orient down.
NOTE: With all handle screws in place, securely tighten
with screwdriver.
STEP 4a: With everything out of the grill, re-lock clasp
on the Keg’s lid.
STEP 4b: With your buddy’s help, flip the grill upside
down and place back into the styrofoam, on its lid.
STEP 5: Screw the legs into the threaded inserts in the
bottom of the grill using the leg washer and M8x20
screws, (hand tighten only).
STEP 6: Assemble the Hoop to the legs using the Hoop
Brackets and the M6x15 screws as shown. Tighten all
leg and hoop bracket screws with a screwdriver.
STEP 7: With your buddy’s help, flip the grill right side
up on to the floor.
M8x20
M6x15

4
MODEL: 911050 / 2000 SERIES
BROIL KING KEG®ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 9: Align the notches in the fire bowl with the fire
bowl supports inside the grill (as illustrated).
STEP 10: Install the Cast Iron Cooking Grate.
STEP 8: Now that the grill is securely on the
stand, open the lid and put the following
parts in place starting at the bottom of the
BROIL KING KEG®:
• Fire bowl
• Charcoal grate
Now you’re ready to season the grill
and start cooking!
Please read the BROIL KING KEG®
Operation Handbook for complete
information about safe and proper
use of this product.
ONWARD MANUFACTURING COMPANY LTD.
585 Kumpf Drive • Waterloo, Ontario, Canada • N2V 1K3
[email protected] • Phone: [phone] • Fax: [phone]
North America Customer Service: 1.800.265.2150
For more information and our complete line of accessories visit us at
www.broilkingbbq.com