Brother NC-series User manual

Brother Multi-Protocol Print Server
NC-series
USER’S GUIDE

Trademarks
Brother is a registered trademark of Brother Industries, Ltd.
HP, HP/UX,JetDirect and JetAdmin are trademarks of Hewllet-Packard
Company.
DEC, DEC server, VMS, LAT, and ULTRIX are trademarks of Digital
Equipment Corporation.
UNIX is a trademarks of UNIX Systems Laboratories.
Ethernet is trademark of Xerox Corporation.
Postscript is trademark of Adobe Systems Incorporated.
Netware is a trademark of Novell, Inc.
Apple, Macintosh, LaserWriter, and AppleTalk are trademarks of Apple
Computer, Inc.
IBM, LAN Server, and AIX are trademarks of International Business Machines
Corporation.
LAN Manager, Windows, and MS-DOS are trademarks of Microsoft Corporation.
VINES is a trademark of Banyan Systems Inc.
NC-2010h, NC-2010p, NC-2100h and BRAdmin are trademarks of Brother
Industries.,Ltd.
All other brand and product names mentioned in this user’s guide are registered
trademarks or trademarks of respective companies.
Compilation and Publication
Under the supervision of Brother Industries Ltd., this manual has been compiled
and published, covering the latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to
change without notice.
Brother reserves the right to make changes without notice in the specifications
and materials contained herein and shall not be responsible for any damages
(including consequential) caused by reliance on the materials presented, including
but not limited to typographical and other errors relating to the publication.
©1997, 1998 Brother Industries Ltd.
Shipment of the print server
If for any reason you must ship your print server, carefully package the print server to
avoid any damage during transit. It is recommended that you save and use the original
packaging. The print server should also be adequately insured with the carrier.
WARNING
When shipping the print server, put it into the unti-static bag to avoid a damage.

TABLE OF CONTENTS
i
TABLE OF CONTENTS
IMPORTANT INFORMATION: REGULATIONS vii
CHAPTER 1
NOVELL NETWARE CONFIGURATION 1-1
General Information 1-1
Creating a Print Queue Using BRAdmin or BRAdmin32 1-2
Installing the BRAdmin software 1-2
Configuring the Brother Print Server (Queue Server Mode in Bindery emulation mode)
1-3
Configuring the Brother Print Server (Queue Server Mode in NDS mode) using
BRAdmin32 1-4
Configuring the Brother Print Server (Queue Server Mode in NDS mode) using Novell
NWADMIN and BRAdmin/BRAdmin32 1-5
Configuring the Brother Print Server (Remote Server Mode in NDS mode) using
Novell NWAdmin and BRAdmin/BRAdmin32 1-7
Configuring the Brother Print Server (Queue Server Mode in Bindery emulation mode)
using PCONSOLE and BRCONFIG 1-8
Configuring the Brother Print Server (Queue Server Mode in NDS mode) using
PCONSOLE and BRCONFIG 1-10
Configuring the Brother Print Server (Remote Printer Mode using PCONSOLE and
BRCONFIG 1-13
The following steps apply to configuring a remote printer with NDS support on
NetWare 4.1x systems: 1-13
The following steps apply to configuring a remote printer on NetWare 3.xx
systems: 1-14
Assigning the Remote printer name and number using BRAdmin/BRAdmin32 1-15
Assigning the Remote printer name and number using BRCONFIG 1-15
Testing the Print Queue 1-16
CHAPTER 2
UNIX NETWORK CONFIGURATION (TCP/IP) 2-1
TCP/IP 2-1
TCP/IP UNIX Host Configuration 2-1
HP/UX Configuration 2-4
IBM RS/6000 AIX Configuration 2-4
Sun Solaris 2.x Configuration 2-5

USER’S GUIDE
ii
SCO UNIX Configuration 2-5
Other Non-Standard Configurations 2-6
IP Address Configuration 2-7
Using the printer front panel to allocate an IP address (printers with LCD panels only)
2-8
Changing the IP Address using the BRAdmin32 application 2-8
Using DHCP to Configure the IP address 2-10
Using arp to Configure the Print Server IP Address 2-11
Using rarp to Configure the IP Address 2-11
Using BOOTP to Configure the IP Address 2-12
Configuring the IP Address with NCP or BRCONFIG 2-13
Before attempting to print 2-15
IP Security 2-16
Raw TCP ports 2-16
CHAPTER 3
WINDOWS NT AND LAN SERVER NETWORK CONFIGURATION
(TCP/IP) 3-1
Windows NT(TCP/IP) Configuration 3-1
Configuring an IP address for the Print Server 3-3
Changing the IP Address using the BRAdmin32 application 3-3
Changing the IP Address using the ARP command 3-5
Windows NT Print Queue Configuration 3-6
Windows NT 4.0 Print Queue Configuration (Printer Driver already installed) 3-6
Windows NT 4.0 Print Queue Configuration (Printer Driver not installed) 3-7
Windows NT 3.5x Print Queue Configuration 3-8
LAN Server / Warp Server Configuration 3-10
Server Configuration 3-10
Programming an IP address for the printer 3-10
Configuration Server 3-12
CHAPTER 4
WINDOWS 95/98 PEER-TO-PEER CONFIGURATION 4-1
LPR method 4-1
Changing the IP Address using the BRAdmin32 application 4-1
Installing the Brother Network Direct Print Software 4-3
Associating to the printer 4-4
Adding a Second Network Direct Print Port 4-5
HP’s JetAdmin compatible method 4-6

TABLE OF CONTENTS
iii
CHAPTER 5
NetBIOS CONFIGURATION (NetBEUI/TCP/IP) 5-1
Introduction 5-1
Print Server Configuration 5-2
Changing the domain name using TELNET or BRCONFIG 5-3
NetBIOS Port Monitor for Windows 95/98, NT4.0 5-4
Installing the Brother Peer to Peer Print Software (NetBIOS) 5-4
Associating to the printer 5-5
Adding a second Network Direct Print Port 5-7
LAN Server/Warp Server Configuration 5-8
Server Configuration 5-8
Workstation Configuration 5-8
CHAPTER 6
APPLETALK NETWORK CONFIGURATION 6-1
AppleTalk 6-1
Macintosh Configuration 6-2
Operation 6-2
How to Select the Print Server 6-2
Printing Binary Graphics 6-3
Changing the Configuration 6-4
CHAPTER 7
WINDOWS NT (DLC/LLC) CONFIGURATION 7-1
Configuring DLC on Windows NT 7-1
Windows NT 4.0 Printer Setup 7-2
Windows NT 3.5x Printer Setup 7-3
Configuring DLC on Other Systems 7-4

USER’S GUIDE
iv
CHAPTER 8
LAT NETWORK CONFIGURATION 8-1
LAT Concepts 8-1
VMS LAT Host Configuration 8-1
Eliminating Blank Pages 8-4
PATHWORKS for DOS Configuration 8-4
PATHWORKS for Windows 95/98/NT4.0 8-5
PATHWORKS for Macintosh Configuration 8-6
DECprint Supervisor Configuration Notes 8-6
ULTRIX Configuration 8-7
Installation on Other Host Computers 8-9
Changing the Configuration 8-9
CHAPTER 9
BANYAN VINES NETWORK CONFIGURATION 9-1
Necessary items to use an Brother print server on a VINES network 9-1
A. File Server User Console 9-1
B. File Server Queue Configuration 9-3
C. Print Server Configuration Using BRAdmin 9-5
D. Print Server Configuration Using the Print Server Console 9-6
E. Testing the print queue 9-7

TABLE OF CONTENTS
v
CHAPTER 10
WEB FUNCTION 10-1
Overview 10-1
How to connect to your printer using a Browser 10-1
Web Function Page 10-2
Log Management Function 10-4
Overview 10-4
How to use this function 10-5
CHAPTER 11
BROTHER INTERNET PRINT (BIP) 11-1
BIP Remote Internet Printing Installation 11-1
General Information 11-1
What this Chapter Covers 11-2
Installing the BIP Software on a Windows 95/98/NT4.0 11-2
Adding a Second Brother Internet Port 11-5
Configuring the Remote Print Server 11-5
Print Server Configuration Checklist 11-5
Using BRAdmin or BRAdmin32 to Configure the Print Server 11-6
Using a Web Browser to Configure the Print Server 11-7
Using the Console to Configure the Print Server 11-7
CHAPTER 12
TROUBLESHOOTING 12-1
Overview 12-1
Installation problems 12-1
Intermittent Problems 12-4

USER’S GUIDE
vi
Novell NetWare Troubleshooting 12-5
TCP/IP Troubleshooting 12-6
Windows NT/LAN Server Troubleshooting 12-7
Brother Peer to Peer Print (LPR) Troubleshooting 12-8
Windows 95/98 (or later) Peer-to-Peer Troubleshooting 12-8
AppleTalk Troubleshooting 12-8
DLC/LLC Troubleshooting 12-9
LAT Troubleshooting 12-10
Banyan VINES Troubleshooting 12-12
Internet Print Troubleshooting 12-12
Web Browser Troubleshooting 12-13
APPENDIX
Appendix A
Command Summary A-1
General Commands A-1
General Server Commands A-3
LAT Commands A-6
TCP/IP Commands A-6
NetWare Commands A-7
AppleTalk Commands A-8
Banyan VINES Commands A-8
NetBIOS/NetBEUI Commands A-9
Internet Print Commands A-9
DLC commands A-9
Appendix B
Using Services (lpd-Plus) A-10
Appendix C
Reloading the Print Server Firmware A-13
General A-13
Downloading from BRAdmin32 on the Windows 95/98/NT4 A-13
Downloading from a UNIX Host Computer using TFTP A-16
Downloading from a UNIX Host Computer using BOOTP A-17
Downloading from a NetWare Server A-18
Downloading from a DEC VMS Host Computer A-19
Downloading from a VINES Server A-20
Obtaining Firmware Updates A-20

REGULATIONS
vii
IMPORTANT INFORMATION: REGULATIONS
Federal Communications Commission Compliance Notice
(For U.S.A. only)
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1)This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
Important
Changes or modifications not expressly approved by Brother Industries,
Ltd. could void the user’s authority to operate the equipment.
Industry Canada Compliance Statement (For Canada only)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme a la norme NMB-003
du Canada.

USER’S GUIDE
viii
DECLARATION OF CONFORMITY (EUROPE)
We, Brother International Europe Ltd.,
Brother House 1 Tame Street, Guide Bridge,
Audenshaw, Manchester M34 5JE, UK.
declare that this product is in conformity with the following normative
documents:
Safety: EN 60950,
EMC: EN 55022 Class A, EN 50082-1
following the provisions of the Low Voltage Directive 73/23/EEC and the
Electromagnetic Compatibility Directive 89/336/EEC (as amended by
91/263/EEC and 92/31/EEC).
Issued by:
Brother International Europe Ltd.
European Technical Services Division
EMC Notice
Warning
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

REGULATIONS
ix
INTRODUCTION
Overview
Brother print servers allow multiple host computers to share a Brother
printer on an 10Mbit or 100Mbit Ethernet network. Any user can print their
job as if the printer was directly connected to their computer. No special
software is required on the host computers and application programs run
without any modification. Because the Brother print servers provides multi-
protocol capabilities, users on DEC, UNIX, Novell, AppleTalk, LAN
Server/Warp Server, Windows NT, Windows 95/98, NetBIOS and Banyan
VINES computers can simultaneously access the same printer.
Features
The Brother print servers offers the widest range of features in the industry,
including:
• LAT, TCP/IP, Netware, AppleTalk, NetBIOS, Banyan VINES and
DLC/LLC protocols
• Network Operating System compatibility:
-Digital Equipment Corporation networks, including
PATHWORKS and DECprint Server
-UNIX systems that support either the Berkeley lpr/lpd printing
protocol, printing to a raw TCP port
-Novell Netware V2.15 or above, V3.xx, or V4.xx, including
support for NetWare Directory Services (NDS)
- AppleTalk Phase 2
-Windows NT4.0 and NT3.5x
-IBM LAN Server V4.0 or above, or any earlier version that has
IBM TCP/IP V2.xx.
-Windows 95/98 (Peer-to-Peer or client mode)
• Very high performance
• Superior network and printer management:
-BRAdmin and BRAdmin32 Windows-based Management utilities.
-SNMP MIB I and MIB II also including printer MIB over IP or IPX
-Remote console management via DEC NCP, TELNET, NetWare, or
NC-2010h/NC-2100h serial port
-HTTP web browser management capability
• lpd-Plus feature for providing multiple services with custom setup and
reset strings plus text-to-PostScript conversion
• Flash memory for easy updating of firmware

CHAPTER 1 NOVELL NETWARE CONFIGURATION
1-1
CHAPTER 1
NOVELL NETWARE CONFIGURATION
Brother print servers allow NetWare client PCs to print jobs on the same
printer as DEC, TCP/IP, AppleTalk, NetBIOS and Banyan users. All
NetWare jobs are spooled through the Novell server.
General Information
In order to use Brother print servers on a NetWare network, one or more
file servers must be configured with a print queue that the print server can
service. Users send their print requests to the file server’s print queue, and
the jobs are then spooled (either directly, or in the case of remote printer
mode, via an intermediate print server) to the appropriate Brother print
server.
Brother’s original BRAdmin application has now been replaced with the
BRAdmin32 application. This offers enhanced Netware support. The
system administrator can now create both Bindery and NDS based queues
in a single environment without having to switch between applications. The
BRAdmin32 application has been designed to run on Windows 95/98 and
NT 4.0. You must install the Novell 32-bit client if you wish to create
queue information on your Netware servers.
✒Note
Brother print servers can service up to 16 file servers and 32 queues.

USER’S GUIDE
1-2
Creating a Print Queue Using BRAdmin or BRAdmin32
Brothers BRAdmin utilities are Windows-based applications that provide
similar functionality to the Netware PCONSOLE utility (or the NWADMIN
utility in Netware 4.1x). To use the BRAdmin programs to configure a
Brother print server under NetWare, make sure that you are logged in as
SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.1x) and
perform the following steps:
Alternatively, Brother print servers can be configured with the NetWare
PCONSOLE or NWADMIN utilities in conjunction with Brothers DOS
BRCONFIG utility.
Installing the BRAdmin software
<For Windows 3.1 users>
✒Note
The BRAdmin32 application will not run on Windows 3.x systems.
1. Insert the “Print Server Configuration Utility for Windows 3.1” diskette
into your disk drive.
2. Choose Run from the File menu in the Program Manager.
3. Type the drive name where you inserted the supplied disk and “SETUP”
in the box: for example, A:\SETUP. Choose the OK button or press the
Enter key.
4. The installer starts running. Follow the instruction on the computer
screen.
<For Windows 95/98/NT 4.0 users>
1. Insert the “Print Server Configuration Utility BRAdmin32” diskette into
your disk drive.
2. Click the Start button and choose Run.
3. Type A:\SETUP. Choose the OK button or press the Enter key.
4. The installer will now start.

CHAPTER 1 NOVELL NETWARE CONFIGURATION
1-3
Configuring the Brother Print Server (Queue Server Mode in
Bindery emulation mode)
1. Start the appropriate BRAdmin program.
2. One or more print server will appear in the list (the default node names
are BRO_xxxxxx_P1orBRO_xxxxxx, where "xxxxxx" is the last six digits
of the Ethernet address).
3. Select the print server that you wish to configure and double click it.
You will be asked for a password. The default password is "access".
4. Select the Netware tab.
✒Note
If necessary change the “Print Server Name”, the default Netware print
server name will be BRO_xxxxxx_P1 where xxxxxx is the Ethernet
address of the print server. Be careful! Changing the name may impact the
configuration of other protocols because the print server service names
will be altered.
a. If it is not already selected, select Queue Server mode.
b. Click on the Add Queue button. (BRAdmin32 users click the
Change Bindery Queues button.
<BRAdmin users>
Click on Create to create a new queue and type in the desired queue
name on the desired file server (or you may select an existing
queue). BRAdmin should automatically find all Netware file servers
in your network and display their names in the “File Server” box.
You must have supervisory access rights to create a queue on the
Netware server you wish to configure. Click OK, Yes, and then OK
again to add this queue. Click on Close, OK, and then select Yes to
save the changes, then click OK.
<BRAdmin32 users>
Select the Netware server which you wish to configure. Then select
the New Queue button. Type in the queue name that you wish to
create. Once you have done that highlight the queue name you
created an then click on the Add button. The queue name you create
will then move to the Service Print Queues box. Click on Close and
then OK
Now exit the BRAdmin application.

USER’S GUIDE
1-4
Configuring the Brother Print Server (Queue Server Mode in
NDS mode) using BRAdmin32
1. Make sure that you logged in as SUPERVISOR (Netware 2.xx or 3.xx)
or ADMIN (Netware 4.xx).
2. Start the BRAdmin32 program.
3. One or more print server services will appear in the list of printers (the
default node names are BRO_xxxxxx_P1orBRO_xxxxxx, where "xxxxxx"
is the last six digits of the Ethernet address).
4. Select the printer that you wish to configure and double click it. You
will be asked for a password. The default password is "access".
5. Select the Netware tab.
✒Note
If necessary change the “Print Server Name”, the default Netware print
server name will be BRO_xxxxxx_P1 where xxxxxx is the Ethernet
address of the print server. Be careful! Changing the name may impact the
configuration of other protocols because the print server service names
will be altered.
a. If it is not already selected, select Queue Server mode.
b. Select the correct NDS tree and NDS context (you can manually
enter this information, or by clicking on the down arrow by the
side of NDS tree and the Change button by the side of NDS
Context, you can let BRAdmin32 display your choices
automatically. Once you have specified this information, click
on the Change NDS queues button.
c. In the Netware Print Queues screen select the appropriate TREE
and Context and then Click the New Queue button.
d. Enter the queue name and specify the volume name. If you do
not know the volume name, select the Browse button to browse
the Netware volumes. When the information is entered correctly,
select the OK button.
e. Your queue name will appear in the TREE and Context that you
specified. Select the queue and click on Add. The queue name
will then be transferred to the Service Print Queues Window.
You will be able to see the TREE and Context information along
with the queue name information in this Window.
f. Click on the Close button. Your Brother print server will now
log into the appropriate Netware server.
Now exit the BRAdmin32 application.

USER’S GUIDE
1-5
Configuring the Brother Print Server (Queue Server Mode in
NDS mode) using Novell NWADMIN and BRAdmin/BRAdmin32
1.Make sure that you are logged in as ADMIN in NDS mode on the
NetWare 4.1x file server and start the NWADMIN application.
2.Select desired Context that will contain the Printer and then click on
Object from the menu bar and then Create. When you get the New
Object menu, select Printer and then OK.
3.Enter the name of the printer and select Create.
4.Select the desired Context that will contain the default print queue, and
then click on Object and Create to get New Object menu.
5.Select Print Queue and then OK. Make sure that Directory Service
Queue is selected and then type in a name for the default print queue.
6.Click on the button to select the print queue volume. Change the
directory context if necessary, then select the desired volume (from
Available Objects) and click OK. Click Create to create the print
queue.
7.Change context if required and then double click the name of the printer
you created in step 3.
8.Click Assignments and then Add..
9.Change context if necessary and select the print queue you created in
step 5.
10.Click Configuration and set the Printer type to Other/Unknown.
Click OK and then OK again.
11.Change the context if required, select Object from the menu bar and
then Create. When you get the New Object menu, select Print Server
and then OK.
12.Enter the name of the print server and select Create.
✒Note
Enter the Netware print server name of the print server exactlyas it
appeared in the Netware tab of the BRAdmin application (this will
generallybe the BRO_xxxxxx_P1 default service name, unless you
changed the name).
Important:
Do not assign a password to the print server or it will not log in.

CHAPTER 1 NOVELL NETWARE CONFIGURATION
1-6
13.Double click on the name of your print server. Click on Assignments
and then Add...
14.If necessary, change the directory context. Select the printer you created
in step 3 and click OK and then OK again.
15.Exit NWADMIN.
16.Start the appropriate BRAdmin application, and select the correct print
server from the list (by default, the node name is BRO_xxxxxx_P1 or
BRO_xxxxxx, where “xxxxxx” is the last six digits of the Ethernet
address).
17. Double click the appropriate Brother print server. You will be prompted
for a password, the default password is “access”. Now select the
NetWare tab.
18. Select Queue Serveras the operating mode.
✒Note
The same service assigned byNetware server name cannot be used for
both queue server mode and remote printer mode.
✒Note
If you want to enable queue server capabilities on services other than the
default NetWare services, you must define newservices that are enabled
for NetWare and for the desired port. Refer to Appendix B in this manual
for information on howto do this.
19. Enter the NDS tree name (note that a print server can service both NDS
and bindery queues).
20. Type in the name of the context where the print server resides.
21. Exit the BRAdmin application making sure that you save the changes
that you have made.

USER’S GUIDE
1-7
Configuring the Brother Print Server (Remote Server Mode in
NDS mode) using Novell NWAdmin and BRAdmin/BRAdmin32
To configure a Brother print server for remote printer mode with
NWADMIN (NetWare Administrator utility) and BRAdmin or
BRAdmin32, you will need to perform the following steps:
1.Make sure that the PSERVER NLM (NetWare Loadable Module) is
loaded on your file server and that you are logged in as ADMIN in
NDS mode on the NetWare 4.1x file server.
2.Start NWADMIN by double clicking on the icon. Select the desired
Context that will contain the new printer.
3.Select Object from the menu bar and then Create. When you get the
New Object menu, select Printer and then OK.
4.Enter the name of the printer and select Create.
5.Double click on the print server name of your PSERVER NLM. Click
on Assignments and then Add...
6.If necessary, change the directory context. Select the printer you
created and click OK. Note the number of the printer, as you will use
this later, then click OK.
7.Select the desired Context that will contain the default print queue,
and then click on Object and Create to get New Object menu.
8.Select Print Queue and then OK. Make sure that Directory Service
Queue is selected, and then type in a name for the default print queue.
9.Click on the button to select the print queue volume. Change the
directory context if necessary, then select the desired volume
(Objects) and click OK. Click Create to create the print queue.
10.Change context if required and then double click the name of the
printer you created previously.
11.Click Assignments and then Add..
12.Change context if necessary and select the print queue you created.
Click OK and then OK again, and then exit NWADMIN.
13. Start the appropriate BRAdmin application, and select the correct
print server you wish to configure (by default, the node names will
begin with BRO_xxxxxx_P1, BRO_xxxxxx).

CHAPTER 1 NOVELL NETWARE CONFIGURATION
1-8
14. Double click the appropriate print server. You will be prompted for a
password, the default password is “access”.
15. Now select the NetWare tab.
16. Select Remote Printeras the Operating Mode, select the name of
your PSERVER NLM as the Print Server Name and select the
number of the printer from step 6 as the Printer Number.
✒Note
The same service assigned by Netware print server cannot be used for
both queue server mode and remote printer mode.If you want to
enable remote printer capabilities on a service other than the default
NetWare service, you must define newservices that are enabled for
NetWare and for the desired port. Refer to Appendix B in this manual
for information on howto do this.
17. Click OK. And exit BRAdmin.
You must now unload the PSERVER NLM from your NetWare file server
console and then reload it in order for the changes to take effect.
Configuring the Brother Print Server (Queue Server Mode in
Bindery emulation mode) using PCONSOLE and BRCONFIG
As an alternative to Brother’s BRAdmin applications or the Novell
NWADMIN (Netware 4.1x systems only), you can use the standard Novell
PCONSOLE utility in conjunction with Brother's BRCONFIG program to
set up your print queues. Note that if desired, you may use a WWW
browser, TELNET, the DEC NCP utility, or the serial port – if your print
server is supplied with a serial interface - instead of the BRCONFIG
utility). The procedure is as follows:
1.Login as Supervisor (NetWare 3.xx) or ADMIN (NetWare 4.1x; be
sure to specify the /b option for bindery mode).
2.Insert the “Print Server Configuration Utility diskette in drive A: and
type the following at the DOS prompt:
A:BRCONFIG or A:BRCONFIG PrintServerName
Where PrintServerName is the Netware print server name of the
Brother print server (the default name is BRO_xxxxxx_P1, where
“xxxxxx” is the last six digits of the Ethernet address).

USER’S GUIDE
1-9
3.If you did not specify the print server name in the BRCONFIG
command, select the corresponding server name from the list of print
servers.
4.When you get the message that the print server is connected, type the
default password “access” in response to the "#" prompt (the
password will not echo), and then press the ENTER key in response
to the Enter Username> prompt.
5.When you get the Local> prompt, type:
SET NETWARE SERVER servername ENABLED
Where servername is the name of the file server on which the print
queue will reside. If there is more than one file server that you wish to
print from, repeat this command as many times as necessary.
6.Type EXIT to exit the BRCONFIG remote console program and save
the changes and start the Novell PCONSOLE utility.
7.Select Print Server Information (NetWare 3.xx) or Print Servers
(NetWare 4.1x; ignore the warning message) from the Available
Options menu.
8.You will be shown a list of current print servers. Press the INSERT
key to create a new entry, type in the Netware print server name
(BRO_xxxxxx_P1 by default, where "xxxxxx" is the last six digits of
the Ethernet address) and press ENTER. Return to the main
Available Options menu by pressing ESCAPE.
9.Select the Print Queue Information (NetWare 3.xx) or Print
Queues (NetWare 4.1x) menu option to see list of configured print
queues.
10.Press INSERT to create a new queue on the file server, type the new
queue name and press ENTER. The name does not have to be related
to the name of the print server resources, but should be short and
convenient for users to remember.
11.Make sure that the new queue name is highlighted, and then press
ENTER to configure the queue.
12.Select Queue Servers(in NetWare 4.1x, this item is called Print
Servers) and press ENTER to specify which network print servers
can print jobs from this print queue. The list will be empty, since none
have been selected yet if this is a new queue.
13.Press INSERT to get a list of the queue server candidates and select
the print server service name from step 8, Press ENTER.