Broyhill Legacy Castle Pines KVS9432 User manual

Need help? We are here for you! 1 (877) 539 – 7436 • Toll Free
ASSEMBLY INSTRUCTION
ITEM#: KVS9432
SKU#: 810487340
CASTLE PINES 2 PERSON
LOVESEAT
[email protected] • Email Address

Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and ttings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Loveseat is for sitting purposes only. Standing on or misuse of loveseat may result in damage or injury.
Not intended for commercial use. Weight limit is 500 lbs (227 kg).
Read all instructions before starting
Clear a at covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Retain these assembly instructions for future reference
PAGE 1 OF 4
Regularly check hardware and tighten if necessary
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming
upholstery cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and
safety of your chair.
In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected
area during o season periods.

PAGE 2 OF 4E-320
PARTS LIST
500 10 20 30 40 60 70 80 90
mm 100
Ⅰ
Ⅱ
Tools
Ⅳ
2
1 1
1
2
37
6
8
10
9
3
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
BACK ASSEMBLY
SEAT ASSEMBLY
ARM
RIGHT BACK CUSHION
LEFT BACK CUSHION
BOLT M6*35
SEAT CUSHION
KVS9432-CS03-1
KVS9432-CS02-1
KVS9432-CS04-3
17D03A030301-YX
61K9432X00001BA
61K9432X50001BA
1
1
JAM NUT M6*1.0
14
17FA05040301-YX
5 3
17C33A0716001YX
4
WASHER d6.5*D13*1.0
BOLT M6*45
61K9432Y00001BA 2
8
17C33A0712001YX
STEP 1
PARTS REQUIRED: 1, 3, 4, & 6
Keep the bolts loose.
x4 x4
4 6
1
3
34
6
4
6

PAGE 3 OF 4E-320
STEP 3
PARTS REQUIRED: 1, 2, 5, 6, & 7
Tighten all bolts by using the supplied Hex key.
5
667
12
x3
x3
x6
5
7
6
STEP 2
PARTS REQUIRED: 2, 3, 4 & 6
Keep the bolts loose.
x4 x4
4 6
2
3
3
4
4
6
6

PAGE 4 OF 4E-320
STEP 4
PARTS REQUIRED: 8, 9, & 10
Warranty
• One–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer’s responsibility for freight and packing charges to and from the service center.
8
9
10
10