
3
VENTILATOR ACCESSORY NUMBER NOMENCLATURE
123456789101112
KVBCN0101BBS
Product Control Description
KV -- Ventilator Accessory Kit BBS -- Bryant Basic Control
BLC -- Bryant Latent Control
Series BLT -- Bryant OneTouch Control
A -- Original Series BST -- Bryant Standard Control
B -- Second Series Accessory Description
HCO -- Concentric Intake/Exhaust Hood
Type HOD -- Intake Hood
AC01 -- Accessory KIT -- Airflow Measuring Kit
CN01 -- Control Timer Description
TM01 -- Timer 20C -- 20 Minute Timer Kit
60M -- 60 Minute Timer Kit
Package Quantity
01 -- Single Pack
KIT NUMBER DESCRIPTION WHERE USED
KVAAC0101HOD Exterior Intake and Exhaust Hood 2Required
KVAAC0101HCO Concentric Intake and Exhaust Hood Used as a single intake/exhaust for SVB1100, SHB1100 models only
KVBCN0101CBS Basic HRV Control Used with all HRVs
KVBCN0101CLC Latent Control Used with ERVs only
KVBCN0101CLT Bryant OneTouch Control Used with all ERVs and HRVs as a main wall control
KVBCN0101CST Standard HRV Control Used with all HRVs
KVATM010120C 20 Minute Push Button Timer Used with all HRVs when 20 minute manual operation is required
KVATM010160M 60 Minute Timer Used with all HRVs, time is adjustable between 10 and 60 minutes
KVBAC0101KIT Airflow Measuring Kit Used with all ERVs and HRVs to balance intake/exhaust airflow
CONTROL
DESCRIPTION
FAN SPEED
CONTROL
HUMIDISTAT
CONTROL
DEHUMIDISTAT
CONTROL
CONTINUOUS
MODE
INTERMITTENT
MODE
Latent Yes Yes No Yes Yes
OneTouch Yes No No Yes Yes
Basic Yes No No Yes No
Standard Yes Yes Yes Yes Yes
Control features
Basic Control:
Allows the user to manually set fan speed to low or high as
required to maximize comfort.
Standard Control:
Offers automatic dehumidistat control and the option to select
continuous or intermittent fan operation. Setting the wall control to
low will activate the continuous mode.
OneTouch Control:
Allows control of ventilator with the touch of a button. This
control will operate as a main wall control. The OneTouch will
operate the unit in Intermittent Mode (20 minutes per hour),
continuous low speed, continuous high speed, and off.
Latent Control (ERVs only):
Low Exchange Mode—If the relative humidity inside the building
is lower than selected, air exchange would occur with the outside at
high speed. If the relative humidity inside the building is higher
than selected, air exchange would occur with the outside at low
speed. This ensures continuous air exchange for constant air
quality.
Intermittent Mode—If the relative humidity inside the building is
higher than selected, no air exchange would occur and the system
would turn off. If the relative humidity inside the building is lower
than selected, air exchange would occur with the outside at high
speed. This mode is ideal for maintaining the proper humidity level
when the continuous mode cannot.
Automatic Defrost Cycle Features
All models offer a non--electric defrost cycle feature which
prevents frost and ice buildup within the heat recovery core. When
the outside air temperature falls below 23_F(--5_C) it is
electronically sensed and the dampers close the outside air ports.
This allows warm indoor air to recirculate within the heat recovery
core. The frequency of this cycle increases as the outside air
temperature decreases.
ERV / HRV