BSD Networks bsg-0800t User manual

5/8 PortGiga EthernetSwitch UserManual
2
Certification
FCC CE
FCC Statement
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,
pursuanttopart15oftheFCC rules.Theselimitsaredesignedtoprovidereasonableprotection
againstharmfulinterference inaresidential installation.Thisequipmentgenerates, usesandcan
radiate radiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,
maycauseharmfulinterferencetoradiocommunications. However,thereisnoguarantee that
interference will notoccurinaparticularinstallation.Ifthisequipmentdoescauseharmful
interferencetoradioortelevision reception, whichcanbedeterminedbyturning theequipmentoff
and on,theuserisencouragedtotrytocorrect theinterferenceby oneormoreofthefollowing
measures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparation betweentheequipmentand receiver.
-Connect theequipmentintoanoutlet on acircuit differentfromthattowhichthereceiveris
connected.
-Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Toassurecontinuedcompliance,any changesormodificationsnotexpresslyapprovedbythe
partyresponsibleforcompliance couldvoidtheuser’sauthoritytooperatethisequipment.
(Example-useonlyshieldedinterface cables whenconnecting tocomputerorperipheraldevices)
FCC RadiationExposureStatement
ThisequipmentcomplieswithFCC RFradiationexposurelimitssetforthforanuncontrolled
environment.Thistransmittermustnotbeco-locatedoroperatinginconjunctionwithany other
antennaortransmitter.
ThisequipmentcomplieswithPart15 oftheFCC Rules.Operationissubjecttothefollowingtwo
conditions:
(1)Thisdevice maynotcauseharmfulinterference, and
(2)Thisdevice mustacceptany interference received,includinginterferencethat maycause
undesiredoperation.
Caution!
ThemanufacturerisnotresponsibleforanyradioorTVinterferencecausedbyunauthorized
modificationstothisequipment.Suchmodificationscouldvoidtheuserauthoritytooperatethe
equipment

5/8 PortGiga EthernetSwitch UserManual
3
PackageContents
Thefollowingitemsshouldbefoundinyour package:
5/8PortGigabitEthernet Switch
PowerAdapter
User Manual
Makesurethat thepackagecontainsaboveitems.Ifany oftheaboveitemsismissingor
damaged, pleasecontact thestoreyouboughtthisproduct from.

5/8 PortGiga EthernetSwitch UserManual
4
Contents
1.INTRODUCTION.......................................................................................................................5
1.1.PRODUCT OVERVIEW.....................................................................................................................5
1.2.MAIN FEATURES ...........................................................................................................................5
1.3.STANDARDS .................................................................................................................................5
1.4.WORKING ENVIRONMENT ..............................................................................................................6
2.INSTALLATION..........................................................................................................................7
2.1.BEFORE INSTALLATION ...................................................................................................................7
2.2.CONNECTINGTHE 5/8PORT GIGABIT ETHERNET SWITCHTO YOUR NETWORK ...........................................7
2.3.LEDINDICATORS...........................................................................................................................7
3.TROUBLESHOOTING.................................................................................................................8

5/8 PortGiga EthernetSwitch UserManual
5
1.Introduction
1.1.ProductOverview
The 5/8PortGigabitEthernet switch providesnon-blocking,wirespeedswitchingforyour10,
100,and1000 megabitnetworkclients.Dropthisswitchinplace ofyourcurrentworkgroup
hubor switch, andyoucanupgradeyourhigh-requirementworkstationstofull Gigabitspeeds
asnecessary,while continuingtoserviceotherclientsat theircurrentspeeds,orbuildyour
networkfromthegroundup,withappropriatelink speedsforeachuser’s requirements.Either
way,it’sperfect for graphicsprojects,multimedia,andotherapplicationsthatneedtomove
largefilesacross thenetworkquickly.Withthe 5/8PortGigabit Ethernet switch,youcan
connect yourexisting10/100 EthernetnetworktoaGigabit serverbackbonewithoutany
additional equipment.All portshaveautomatic MDI/MDIXdetection,soinstallationisworry
free.Eachportindependentlyand automaticallynegotiatesforbestspeedandwhethertorun
inhalf or full-duplexmode.
1.2.MainFeatures
CompliantwithIEEE802.310Base-TEthernet,IEEE802.3u100Base-TX,IEEE802.3ab
1000Base-T
5/810/100/1000Mbps Ethernetports
Eachportsupportsfull duplex10/100/1000Mconnectivity(halfduplexonlysupportedin
10/100MMode)
IEEE802.3xstandardflowcontrolforfull-duplex,optionalbackpressurefunctionfor
half-duplexoperation
10/16Gbps switchingfabriccapacity
Supports 9216bytes jumbopacket lengthforwarding at wiredspeed
8KMAC address table
PowerEfficient
LEDindicators forsimplediagnostics
Plug andPlay
1.3.Standards
IEEE 802.310Base-T
IEEE 802.3u 100Base-TX
IEEE802.3ab1000Base-T
IEEE 802.3xFlowControl

5/8 PortGiga EthernetSwitch UserManual
6
1.4.Working Environment
Temperature
0°to40°C(operating)
-40°to70°C(storage)
Humidity
10%to90 %non-condensing(operating)
5%to90%non-condensing (storage)
Power
DC9V

5/8 PortGiga EthernetSwitch UserManual
7
2.Installation
2.1.BeforeInstallation
Takenote ofthefollowing conditionsbeforeusingyour switch:
Install the5/8PortGigabitEthernet Switchinafairlycoolanddry place.See Working
Environment for theacceptable operatingtemperatureandhumidityranges
InstalltheSwitchinasitefree fromstrongelectromagnetic sources,vibration,dust,and
direct sunlight.
Leaveat least10cmof spacetoboththeleftand rightof theswitchfor ventilation.
Visuallyinspect theDCpowerjackandmakesurethepoweradaptercordissecurely
connected.
Donotplace itemsontop ofswitch
2.2.Connecting the5/8PortGigabitEthernetSwitchto
YourNetwork
Description Function
PWR Connecttopoweradapterprovidedwithunit.Don’tuseother
poweradaptersas yourswitchcouldbedamaged.
LAN1-5/8
Theseportssupportnetworkspeedsof10Mbps, 100Mbpsor
1000Mbps,andcanoperate inhalfandfull-duplextransfermodes.
TheseportsalsosupportautomaticMDI/MDIXdetection,which
givestheSwitchtrue‘plug andplay’capabilities. Justconnect any
networkcable fromadevicetotheswitch,andtheswitchwill
automaticallydetectthesettingsofthedevice andadjustitself
accordingly.
2.3.LEDIndicators
TheLEDIndicatorswillallowyoutomonitor,diagnoseandtroubleshootanypotentialproblem
withtheswitch, connection orattacheddevices.
LED Function
PWR OnPoweron
OffPoweroff
1-5/8
OnCorrespondingportconnectionnormal
FlashingDatatransmitting
OffCorrespondingportconnectionabnormal/notconnected

5/8 PortGiga EthernetSwitch UserManual
8
3.Troubleshooting
1.The PowerLEDis notlit
CheckiftheACpowercordiswell connected.Try tounplugandplugbackinthepower
cord totheLAN Switchor tryanotherpower outlet.
2.The Link LEDis notlit
Makesurethenetworkconfigurationofconnecting deviceiscorrect,andnetworkcardand
driversareinstalledcorrectly.
Checkthecableconnections.
Makesurethecable distance betweentheSwitchandotherIEEE802.3compatible
networkdevice doesnotexceed100meters.
3. Performanceis bad
CheckthestatusofEthernet switching.IfEthernet switching isset tofull-duplexon one
device butapartneris set tohalf-duplex,thenperformancewillbepoor.
Makesurethecablebetweentheswitchand otherIEEE802.3compatible networkdevice is
Category5UTPorbetter.
4. Some devicescan’t talk tootherdevicesonthenetwork
Checkstatusof theLinkLEDstomakesuredevicesarelinked.
Makesurethat thedevices'networkconfigurationsarecorrect.
Resettheswitchifneeded.