BSi MINI iAXIS User manual

1
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
MINI iAXIS INSTALLATION GUIDE
PRODUCT FEATURES:
RECOMMENDATIONS FOR THE USER:
1)Before the installation, make sure that there is no voltage.
2)Do not touch the fitting when it is working on / switched on
3)Do not look at the fitting directly or from a short distance.
4)Disconnect / switch off the fitting before changing the lamps
NOTES:
-Technical amendments are reserved.
-CE – Conformity mark
-The manufacturer is then discharged from liability when damage is caused by improper
use or installation.
-Clean luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use
high pressure cleaners.

2
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
1) With raised mounting bracket;
- Drill holes on the mounting surface and hammer the bolts to be equal to the mounting holes on the brackets.
- The product is screwed onto the mounting floor.
Mounting surface; Suitable for floor, wall and ceiling.
MINI iAXIS INSTALLATION GUIDE
Mounting Surface Mounting Surface
SetScrew
Note: - The bracket can be moved back and forth by loosening the setscrew on the mounting part.

3
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
2) With short and long adjustable mounting bracket;
- Make holes on the wall equal to mounting apparatus and fix the plugs.
- Screw the luminaire to the wall and adjust the angle.
Mounting surface; Suitable for floor, wall and ceiling.
MINI iAXIS INSTALLATION GUIDE
Mounting Surface
Mounting Surface
M4 Screw
* In order to adjust the luminaire the M4 screw on the mounting bracket is loosened and retightened
after bringing it to the desired angle.
M4 Screw

4
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
MINI iAXIS INSTALLATION GUIDE
- Mini iAxis Mono Electrical Connection
IP 68 Terminal
Block
*Page 5
IP 68 Plug
Connector
*Page 6
or or
IP 68 Socket
The incoming
power line.
When connecting the
luminaires, make sure that the
same color cables are
matching. (+) Brown
(-) Blue
- Mini iAxis Mono Multi Electrical Connection
The incoming power line.
IP 68 Terminal
Block
*Page 5
Ip68 Junction Box
*Page 7
When connecting the
luminaires, make sure that the
same color cables are
matching. (+) Brown
(-) Blue

5
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
MINI iAXIS INSTALLATION GUIDE

6
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
MINI iAXIS INSTALLATION GUIDE

7
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
MINI iAXIS INSTALLATION GUIDE

8
Headquarters : Konutkent Mah. 3029 Cad. No:3/91 06810 Çankaya Ankara/TURKEY Phone : [phone] Fax : [phone] Email : [email protected]
MINI iAXIS INSTALLATION GUIDE
Considerations
- Do not cut-off or damage the cables of the products supplied as sockets.
Otherwise, water may enter to the luminaire through cable and damage the electronic
parts inside.
- If you make the electrical connection, except for IP.68 Terminal Block - IP.68 Plug connector
- IP.68 socket; the connections must be under IP protection. Otherwise, water may enter to the
luminaire through cable and damage the electronic parts inside.
- The IP68 Connecting kits must be assembled in accordance with the installation instructions.
Otherwise, water may enter to the luminaire through cable and damage the electronic parts inside.
- The luminaire should not be opened and screws should not be loosened. If you want to open the
luminaire, please contact our company.
Out of Warranty Situations
- Opening the product or loosening the screws.
- Product last output cable is not protected IP67-IP68.
- Faulty electrical connection.
- Wrong IP68 socket-terminal block- plug connector connection.
(Wrong opening of the cable length, fauly tightening the screws etc.)
- If the IP68 Connecting kits are under water.