Light Sky Tornado Series User manual

Please read these user manual carefully before use
USER MANUAL
FLY DRAGON LIGHTING EQUIPMENT CO., LTD
www.lightsky.com.cn
www.lightsky-china.com
Tornado Series
S600 SPOT

www.lightsky.com.cn
www.lightsky-china.com FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
LIGHT SKY PROFESSIONAL SHOW LIGHTING
Congratulations on choosing our company product! We thank you for your custom.
◆Please note that this product, as all the others in the rich my company range, has
been designed and made with total quality to ensure excellent performance and
best meet your expectations and requirements.
◆Carefully read this user manual in its entirety and keep it safe for future reference.
It is essential to know the information and comply with the instructions given in this
manual to ensure the fitting is installed, used and serviced correctly and safely.
◆My company disclaims all liability for damage to the fitting or to other property or
persons deriving from installation, use and maintenance that have not been carried
out in conformity with this user manual, which must always accompany the fitting.
◆My company reserves the right to modify the characteristics stated in this user
manual at any time and without prior notice.
Contents
1. Safety information....................................................................................................2
2.Technical information...............................................................................................3
3.Attachment ........................................................................................5 and body size
4.Installation and connecting.......................................................................................6
5. Control panel............................................................................................................7
6. Menu setting.............................................................................................................8
7.Channel function.....................................................................................................10
8. .....................................................................................15Circuit connecting diagram
9.Cleaning and maintenances.....................................................................................16
10.Troubeshooting....................................................................................................16
11. ...........................................................17Duty exonerative and copyright protection
12. Company information...........................................................................................18
1

• Installation
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
The safety chain must be properly hooked onto the fitting and secured to the framework, so that,
if the primary support system fails,the fitting falls as little as possible.
If the safety chain gets used, it needs to be replaced with a genuine spare.
• Minimum distance from flammable materials
The projector must be positIoned so that any flammable materials are at least 0.2 metres from
every point on the surface of the fitting.
• Mounting surfaces
It is permissible to mount the fitting on normally flammable surfaces.
• Maximum ambient temperature
Do not operate the fixture if the ambient temperature (Ta) exceeds 38℃.
•Protection against electrical shock
Connection must be made to a power supply system fitted with efficient earthing (Class I appliance
according to standard EN 60598-1).
It is,moreover, recommended to protect the supply lines of the projectors from indirect contact and/or
shorting to earth by using appropriately sized residual current devices.
• Connection to mains supply
Connection to the electricity mains must be carried out by a qualified electrical installer.
Check that the mains frequency and voltage correspond to those for which the projector is designed
as given on the electrical data label.
This label also gives the input power to which you need to refer to evaluate the maximum number
of fittings to connect to the electricity line, in order to avoid overloading.
Don't use the power cable when the insulation is damaged.
It must be the manufacturer or distributor or the professional person to change the damaged power
cable in order to avoid any dangerous.
• Temperature of the external surface
The maximum temperature that can be reached on the external surface of the fitting, in a thermally
steady state, is 100℃.
• Maintenance
Before starting any maintenance work or cleaning the projector, cut off power from the mains supply.
After switching off, do not remove any parts of the fitting, to avoid getting burnt for at least 30 minutes.
After this time the likelihood of the lamp exploding is virtually nill.
The fitting is designed to hold in any splinters produced by a lamp exploding. The lenses must be
mounted and, if visibly Damaged, they have to be replaced with genuine spares.
• Lamp
The fitting mounts a high-pressure lamp that needs an external igniter. This igniter is fitted onto the
apparatus.
-Carefully read the "operating instructions" provided by the lamp manufacturer.
-Immediately replace the lamp if damaged or deformed by heat.
• Battery
This product contains a rechargeable lead-acid battery. To preserve the environment, please dispose
the battery at the end of its life according to the regulation in force.
SAFETY INFORMATION
The products referred to in this manual conform to the European Community Directives to which
they are subject:
•Low Voltage 2006/95/CE
•Electromagnetic Compatibility 2004/108/CE
Pb
t 100℃
c
2
t 38℃
a
www.lightsky.com.cn
www.lightsky-china.com
LIGHT SKY

3
●Power supplies available
AC90-240V/50-60Hz
●Power
600W(220V/50Hz)
●Lamp
- Brand:SIRIUS HRI 440W 60x1(OEM) 41mm
- Power:440W
- Colour temperature:7600K
- Average life 1200h
●Motors
18PCS mute sound motor,2PCS three phase motor,
16bit driver.
●Channels
Max 25 control channels.
●Beam angle
Parallel beam angle 4-25°
●Inputs
DMX 512/WIRELESS DMX 512(Apolegamic)
●Strobe
Double lens strobe(0.5-14 times/second)
●Dimmer
0-100% linear adjustment
●Prism
3+8 rotation prism
●Lens
High precision optical lens
●Wash effect
Adjustable wash effects angle
●Travel
- PAN = 540°
- TILT = 239°
●Maximum speeds
- PAN = 2.9s/540°
- TILT = 1.5s/239°
●Resolution
- PAN = 2.11°
- PAN FINE = 0.008°
- TILT = 0.94°
- TILT FINE = 0.004°
TECHNICAL INFORMATION
●IP set
Automatic charging battery,IP could be set
without electricity.
●Features
Remote control lamp’s switch function,
display light and lamp’s using time,
automaticallay adjust cooling-fan’s speed,
Drop 50W power when strobe lens.
●IP20 protection rating
- Protected against the entry of solid bodies
larger than 12mm.
- No protection against the entry of liquids.
●Safety Devices
- Bipolar circuit breaker with thermal protection.
- Automatic break in power supply in case of
overheating or failed operation of cooling
system.
●Cooling
Forced ventilation with axial fans.
●Structure
Heat-proof plastic+module pressing alloy materials.
●CE Marking
- In conformity with the European Union Low Voltage.
- Directive 2006/95/CE and Electromagnetic
compatibility Directive 2004/108/CE.
●Two side handles for transportation.
●Device locking PAN and TILT mechanisms for
transportation and maintenance.
●Weights and size
Box Size:
450x430x730(mm)
N.W.:22.5kg G.W.:27.5kg
Flycase Size:
2PCS:920x690x785(mm)
N.W.:45kg G.W.:96kg
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
PROFESSIONAL SHOW LIGHTING

Rotation gobo wheel(1 white+8 rotation gobo)
(please refer to the actual material)
4
Fixgobo wheel(1 white+12 fixgobo)
White
Red
Green
Blue
Orange
Yellow
Magenta
Color wheel(please refer to the actual material)
(please refer to the actual material)
Gobo size:outside15.9mm/inside10mm
www.lightsky.com.cn
www.lightsky-china.com
LIGHT SKY
White
4°margin brightness
Distance,spot diameter and illumination diagram
4°center brightness
25°Highlights
6
4
Lux(fc)
16300(1515)
25°
8
10
8000(743) 4020(374) 1880(175) 1040(97)
Lamp Total Output:24000 lumens
With zoom(4°- 25°)
11400(10 59) 5200(483) 2720(253) 1300(121) 735(68)
750(70) 400(37.2) 170(15.8) 75(7) 45(4.2)
12
36000(3346)
24000(2230)
1430(133)
Distance m（ft in）
4°Dimeter m（ft in）
25°Dimeter m（ft in）
0
2
4
6
2
10
8
0
4°
10(32´10 ") 15(49´3 ") 20(65´7 ") 30(98´5 ") 40(131´3 ") 50(164´)
0.78(2´7 ")
4.35(14´3 ")
1.17(3´10 ")
6.5(21´4 ")
1.57(5´2 ")
8.7(28´7 ") 13.0(42´8 ") 17.4(57´1 ")
3.67(12´)
21.8(71´6 ")
4.23(13´11 ")
580(54)
398(37)
30(2.8)
12
2.38(7´10 ")
7(23´)
0.55(1´10 ")
3.12(10´3 ")
White
1
2
3
4
56

Attachmentcontents- Fig. 1
2
Body Size---Fig 2
ATTACHMENT AND BODY SIZE
LAMP
1
SAFETY CORD
DMX CABLE
WARRANTY CARD
USER MANUAL
BRACKET
(fitted into projector)
5
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
PROFESSIONAL SHOW LIGHTING

Installing the projector- Fig. 3
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING:with the exception of when the projector is positioned on the floor, the safety cable must be fitted.
This must be securely fixed to the support structure of the projector and then connected to the fixing point at
the centre of the base.
3
Mains
4
Connecting to the mains suppply ---Fig 4
INSTALLATION AND CONNECTING
L
N
6
www.lightsky.com.cn
www.lightsky-china.com
LIGHT SKY

SCREEN
1
3
2
DMX 512
3 PIN
SIGNAL
SIGNAL
Connecting to the control signal line (DMX) - Fig. 5
◎ Please use the round 3 or 5-pin XLR plugs &sockets offered by menu facture to connect the first
projector's output to the second projector' input and connect the second projector's output to the
third projector's input. And in the same way for the rest,eventually connect the last projector's
output,all the projectors are together.
◎The projectors's control signal output or input by using the 3 or 5-pin XLR pug and socket.If need to
lengthen the communication cable,please make sure the both side of 3 or 5-pin plug is one to one .
(one to one,two to two,three to three).Otherwise,the communication cable will be interrupted.The
communicate cable is 2-cord screened cable 75Ω resistance with each core is at least a 0.5mm
diameter.(Caution:All the inside leading wire of 3 or 5-pin XLR plug couldn't touch each other or
plinth).
◎Recommend to use the DMX signal terminator for the installation to avoid the electronic noise dama
-ge the digital control signal.Simply speaking,DMX terminator is an XLR connector with a 120Ω 1/2W
resistor connected across pin 2 and 3.Which is then plugged into the output socket on the last projec
-tor in the chain.Refer to the connection.
CONTROL PANEL
SIGNAL
SCREEN
DMX512
5 PIN
1
2
3
4
5
SIGNAL
UP ARROWHEAD:Page up or increase；
DOWN ARROWHEAD:Page down or reduce；
ENTER:OK Function
RETURE:Exit (In the choice screen)
Press the switch. The projector starts resetting the effects. At the same time, the following
information scrolls on the display:
DMX 512
5
7
6
EN TE R
WA RNI NG:HOT!
Maxim um am bi ent t emper atu re t =3 8℃.
a
Alway s dis co nne ct from m ain s be for e repla cin g th e lam p.
Cauti on: Ho t lam p. Allow t o coo l fo r 30 mi nutes
befor e ope ni ng.
Exter ior s ur fac e tempe rat ur e und er
stead y sta te c ond ition = 100 .℃
Prolo nge d ex pos ure to
unshi eld ed l amp c an
cause e ye an d sk in bu rns.
EN TE R
Maxim um ambie nt temper ature t =38℃.
a
Alway s discon nect from m ains before
repla cing the l amp.
Cauti on:Hot l amp. Allow to c ool for 30
minut es befor e openin g.
Exter ior surf ace tempe rature under
stead y state co ndition = 100 .℃
Prolo nged exp osure to u nshield ed lamp
can cau se eye and s kin burn s.
WA RNING :H OT !
W
I
R
E
L
E
S
S
ON O FF
FU NCTIO N
POWER
SI GNA L
Wireless version
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
PROFESSIONAL SHOW LIGHTING

8
MENU SETTING(V1.0)
www.lightsky.com.cn
www.lightsky-china.com
LIGHT SKY
Setup DMX
Address
Option
Information
Manual
Control
Factory
default
12
Option
Display Reversal
BackLight
Off
On
Open
Auto
Close(15S)
Invert Invert Pan Off
On
Off
On
Invert Tilt
return
(ESC)
return
(ESC)
return
(ESC)
return
return
(ESC)
(ESC)
System
Version
Information
3
XY:V
MCU1:V
MCU2:V
MCU3:V
Fixture
Hours
Lamp
Hours
Total: (hrs)
Total: (hrs)
Cur: (hrs)
Cur: (hrs)
Fans Fan1: RPM
Monitor
Fan2: RPM
Fan3: RPM
Fan4: RPM
DMX
Monitor Cyan( )
Magenta( )
return
(ESC)
Color( )
Dimmer( )
S.Gobo( )
R.Gobo( )
AnimaRot( )
GoboRota( )
IRIS( )
Anima( )
Prism( )
Zoom( )
Yellow( )
CMY Macro( )
Strobe( )
Tilt( )
TiltFine( )
Function( )
P/T Time( )
Pan( )
PanFine( )
PrismRot( )
Focus( )
Frost( )
Lamp( )
Time
Clear Clear PWRON Time
return
(ESC)
Clear LAMP Time
Reset
LampOnPowerOn Off
On

9
4
Lamp
Manual
Control Off
On
return
(ESC)
6
Factory
default
Password Input:
2222
Password Input:
1111
Color Adjust Value:000-255
Value:000-255
Value:000-255
Value:000-255
Value:000-255
Value:000-255
R.Gobo Adjust
S.Gobo Adjust
Shutter Adjust
Pan Adjust
Tilt Adjust
return
(ESC)
return
(ESC)
5
Pan/Tilt Reset
SystemReset
Reset
Effect Reset
return
(ESC)
7050
FanSP Shut
FanSP-1Color
FanSP-2Color
When the dmx signal is fine, it shows " DMX Input OK".
When no dmx signal, it shows " DMX Input Fail".
1.
2.
Restore the factory parameters
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
PROFESSIONAL SHOW LIGHTING
8130
8610

CHANNEL FUNCTION
CHANNEL CHANNEL MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
21
17
22
18
23
19
24
20
25
CHANNEL
10
CYAN
MAGENTA
YELLOW
CMY MACRO
COLOR
DIMMER
S.GOBO 1
R.GOBO 2
R.GOBO 2 ROTATION
IRIS
ANIMA
FROST
TILT
ANIMA ROTATION
ZOOM
TILTFINE
PRISM
FOCUS
FUNCTION
PRISM ROTATION
PANFINE
PAN
LAMP
XY SPEED
STROBE
www.lightsky.com.cn
www.lightsky-china.com
LIGHT SKY

11
255
0
1 2 3
196-255
4-195
0-3
CMY macros from slow to fast
C-M-Y-C Color gradual
Unused range
175-255
35-174
30-34
25-29
20-24
15-19
10-14
5-9
0-4
250-255
210-249
206-209
156-205
152-155
102-151
98-101
8-97
4-7
0-3
255
0
1
248-255
240-247
232-239
224-231
216-223
208-215
200-207
192-199
184-191
176-183
168-175
160-167
152-159
144-151
102-143
52-101
48-51
44-47
40-43
36-39
32-35
28-31
24-27
20-23
16-19
12-15
8-11
4-7
0-3
•channel 1、2、3
CYAN MAGENTA YELLOW
BIT EFFECT
BIT EFFECT
BIT EFFECT
BIT EFFECT
BIT EFFECT
BIT EFFECT
• CMY MACRO- channel 4
COLOR- channel 5
STROBE- channel 6
DIMMER- channel 7
From dark to
light dimmer
Dark
From slow to fast rainbow
White,red...magenta,white color gradual
magenta
Yellow
Orange
Blue
Green
Red
White
Strobe open
Random strobe slow - fast
Strobe open
Closing strobe pulse slow - fast
Strobe open
Opening strobe pulse slow - fast
Strobe open
Strobe slow-fast
Strobe open
Strobe closed
MACRO
• S.GOBO 1- channel 8
MACRO
White
Gobo 12 shake slow-fast
Gobo 11 shake slow-fast
Gobo 10 shake slow-fast
Gobo 9 shake slow-fast
Gobo 8 shake slow-fast
Gobo 7 shake slow-fast
Gobo 6 shake slow-fast
Gobo 5 shake slow-fast
Gobo 4 shake slow-fast
Gobo 3 shake slow-fast
Gobo 2 shake slow-fast
Gobo 1 shake slow-fast
White
Running water slow-fast
Running water fast-slow
Gobo 12
Gobo 11
Gobo 10
Gobo 9
Gobo 8
Gobo 7
Gobo 6
Gobo 5
Gobo 4
Gobo 3
Gobo 2
Gobo 1
White
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
PROFESSIONAL SHOW LIGHTING
White

12
240-255
224-239
208-223
192-207
176-191
160-175
144-159
128-143
72-127
64-71
56-63
48-55
40-47
32-39
24-31
16-23
8-15
0-7
240-255
224-239
208-223
192-207
128-191
64-127
0-63
248-255
208-247
168-207
128-167
88-127
0-87
255
0
240-255
224-239
208-223
192-207
98-191
4-97
0-3
170-255
85-169
0-84
240-255
224-239
208-223
192-207
129-191
127-128
64-126
1-63
0
180°
0°
• R.GOBO 2- channel 9
MACRO
BIT EFFECT
Gobo 8 shake slow-fast
Gobo 7 shake slow-fast
Gobo 6 shake slow-fast
Gobo 5 shake slow-fast
Gobo 4 shake slow-fast
Gobo 3 shake slow-fast
Gobo 2 shake slow-fast
Gobo 1 shake slow-fast
Rotation slow-fast
Gobo 8
Gobo 7
Gobo 6
Gobo 5
Gobo 4
Gobo 3
Gobo 2
Gobo 1
White
• GOBO 2 ROTATION- channel 10
IRIS- channel 11
BIT EFFECT
BIT EFFECT
BIT EFFECT
EFFECT
EFFECT
BIT
BIT
ANIMA- channel 12
ANIMA ROTATION- channel 13
PRISM- channel 14
PRISM ROTATION- channel 15
STOP
Swing slow-fast (360°
Swing slow-fast (270°
Swing slow-fast (180°
Swing slow-fast (90°
Forwards rotation slow-fast
Backwards rotation fast-slow
Gobo angle adjustment
)
)
)
)
BIT EFFECT
Swing slow-fast (57.6°
Swing slow-fast (28.8°
Swing slow-fast (7.2°
Swing slow-fast (1.8°
Backwards rotation slow-fast
Forwards rotation fast-slow
Unused range
)
)
)
)
Fire panel entry
3-PRISM
8-PRISM
Unused range
Swing slow-fast (360°
Swing slow-fast (270°
Swing slow-fast (180°
Swing slow-fast (90°
Forwards rotation slow-fast
Stop
Backwardsrotation fast-slow
0-90° angle adjustment
Unused range
)
)
)
)
Min.iris
Slow-fast, open fast and close
Slow to iris close
Slow-fast, open slow and close
fast to iris close
Slow-fast zoom - closed light - open
Slow-fast zoom - open
Min.-max.adjustable iris
www.lightsky.com.cn
www.lightsky-china.com
LIGHT SKY
White

13
128-255
255
0-127
0
255
0
0-540°
2.11°
255
0
255
0
0-239°
FROST- channel 16
BIT EFFECT
Frost
ZOOM- channel 17
BIT EFFECT
BIT EFFECT
FOCUS- channel 18
Max.-min.
adjustable
beam
Near
Distant
255
0
• PAN -channel 19
BIT EFFECT
• PAN FINE-channel 20
BIT EFFECT
• TILT- channel 21
BIT EFFECT
Unused range
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
PROFESSIONAL SHOW LIGHTING

14
255
0
0.94°
241-255
234-240
227-233
220-226
213-219
206-212
199-205
192-198
185-191
178-184
171-177
164-170
157-163
146-156
135-145
124-134
113-123
102-112
91-101
80-90
69-79
58-68
47-57
36-46
25-35
14-24
7-13
0-6
224-255
192-223
160-191
64-159
32-63
0-31
2-255
0-1
ON
ON
OFF
OFF
• TILT FINE- channel 22
EFFECT
BIT
• FUNCTION- channel 23
EFFECT
BIT
• LAMP- channel 24
• XY SPEED- channel 25
EFFECT
BIT
Unused range
XY motor reset(5s)
All motors of head reset(5s)
Frost motor reset(5s)
Zoom motor reset(5s)
Prism motor reset(5s)
Iris motor reset(5s)
Strobe motor reset(5s)
Anima motor reset(5s)
CMY motor reset(5s)
Colour motor reset(5s)
S.gobo motor reset(5s)
R.gobo motor reset(5s)
Complete reset(5s)
LCD positive(5s)
LCD reverse(5s)
LCD turn off(5s)
LCD turn on(5s)
Gobo,colour,prism,frost head
Function changing blackout
XY,gobo, colour,prism,frost
changing blackout
Unused range
Frost selecting blackout
Prism selecting blackout
Colour changing blackout
Gobo and iris changing blackout
XY move blackout
5 seconds delay,maximum fan speed
5 seconds delay, fan speed switch to
menu the set value
Lamp on(5s)
Unused range
Lamp off(5s)
Unused range
Lamp reduced power( 50W )
Unused range
Fast - slow
The speed is controlled by
the controller
BIT EFFECT
www.lightsky.com.cn
www.lightsky-china.com
LIGHT SKY

Circuit connecting diagram
15
J4
GNDGNDVCC VCC
J1
28V G ND
GND 2 8V
J1
LN
LAMP
Power input
AC90~240V
50~60Hz
Fuse 5A
Switched power supply
Electronic ballast
X Y Drive board
Power
input
output
Power
input
output
Power input
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
PROFESSIONAL SHOW LIGHTING

CLEANING AND MAINTENANCES
●In order to ensure the projector could work normally.It should be kept clean always .It is recommended that the
fans and ventilation in let should be cleaned every 15 days.The lens and dichroic colour filters should also be reg
-ularly cleaned to maintain an optimum light output.Do not use any type of solvent on dichroic colour filters.It will
damage the projector.
●Suggestion:The continue usage of the light don't exceed 4 hours.Or it will shorter the usage of the lamp.Please
use the alternative operation to solve this problems.
●Please disconnect the power supply when begin to maintenaceor takedown the light.Please let the parts cool
down 10 minute at least then begin to install.If need to replace the lamp,please wait 10 minute again at least to
let the lamp cool down completely or which maybe burned down.
●Please inspect the lens or other moving parts timing and keep them clear and static.If find anything damaged or
losseness,must change a lamp or fix the lamp in order to avoid the accident.
●The light use the strong cool system. It is easy for the dirty to be collected .Please do clear the hot-sak one time
two week at least.
●After you use the light,please check the intake place whether there are some wastepaper,please clean it up,or
the windmill will break down and causing fire.
TROUBESHOOTING
It is recommended some solution for some normal trouble shooting.Any unsolutioned problems should always
be handle by the professional person.Disconnect the power supply before maintenance the light.
■Lamp off：
◎Please check if install the suitable lamp.
◎Please check the connection of the power supply or switch is ok.
◎Please check whether the lamp will reach the end of their life can explode ,please replace a same description
lamp.
◎Please measure if the power supply is enough.
◎Please check if the operation is correct.Please wait 30 minutes at least till the lamp cool down enough,then
could the connect the power supply,which could be normal work.
◎Please check whether the DMX 512 controller pass the "turn on" order.
◎Please check the connection of the trigger circuit is loose contact.
◎Please check whether the connected point of the trigger point is loose contact ,faster the connect cable .
◎Check menu INFORMATION FANS MONITOR FAN1,FAN2,FAN3 , Whether the fan speed in
500RPM above, below 500RPM the lamp does not light, replace with the specifications of the fan.
◎Please check if the switch of the temperature is damaged.
◎Check the bottom box driver board "WK" socket if the resistance 0 between the two line.
■The light beam is dark,not inhomogeneou:
◎When the lamp is to the usage life,the light is not enough,please change a new one for the same description .
◎Please check the reflector parts is dirty.Keep them clear.
◎Please measure if the power supply is enough.
◎Small adjusting is suitable for change height or screw system till get a ideal light beam.
◎TO enter the menu FANCTORY DEFAULT input 2222 enter the COLOR and GOBO regulation,
until the optical center.
16
www.lightsky.com.cn
www.lightsky-china.com
LIGHT SKY

■The light shadow is fogging:
◎Please check the data on the DMX 512 controller is suitable for the electric focus.
◎Please check the machenical parts is jamging.After cleaning,please add some temperature -durable juice.
■The light works interruptly:
◎Please check if the fan works normally or mote clogging.
◎Please check whether the abstract heat have the mote clogging.
◎Please check if the lamp is to the usage life.
◎Please check if the power supply is enough,the connection of the power supply or the circuit are good.
◎Please check if the switch of the sup-temperature is good.
■Though the light is lighting,but it couldn't accept the control order:
◎Please check the start code address and the function option are correct.
◎Please check whether the communicate control cable is ongood connection or the cable is too long or interrupt.
◎Please check the control system is not valid,check the singal amplifier of chain connected is valid.
◎Please check whether the communicate cable is too long or the other equipment is mutually conjugate.
◎Please arrange the wire well ,,Shorter the signal cable ,put the high voltage cable and low voltage cable separ
-ately .
◎Add the signal amplify isolator.
◎Signal cable is used the excellent screening doublet (Resistance 75 Ω ）
◎The end of the light end and the end resistance.
◎When the lamp don't cool down enough but do the incorrect operation will let the trigger up to super- high
voltage leak.It will damage the electric circuit and communicate IC or CPU .Under this condition,please
change the PCB board.
■the light can't move:
◎Please check if the power supply is suitable for the light voltage data.
◎Please check the fuse of input voltage is defective.
◎Please check the light if they are deformating,inside parts is broken,become wet...etc will lead the loose contact.
◎Please check if the inside lead wire and the connector is loose.
◎Please check the electric parts (such as the switch,transformer,ballast,electric capacity,piezoresistor, filter,
PCB board,controller to motor) is short-circuit or burn down.
■Part of the projector couldn't be responsled to the controlling order:
Please check the order is correct to the moving.◎
Please check the mechanicalpart is deformation or loose.◎
Please check the function to the motor socket is loose or drive chip is burn down.◎
Please check the wire of the motor is cut at zig point.◎
Please check these function to the motor is damaged.◎
On working,the pan &tilt couldn't work normally:■
Please check according to the above step by step.◎
Please check the belt of the X.Y is broken.◎
Please check the X/Y direction data to the receiver is damage.◎
◎Re-projector reset.
17
DUTY EXONERATIVE AND COPYRIGHT PROTECTION
◇The lamp belongs to consumption products that is not guarantee to keep it in good repair.
◇Any products broken that didn't according to the instruction is not guarantee to keep it in good repair.
◇The commentary for all the instruction belongs to the supplier in final.
◇No authorize can't copy.
◇The information in this manual may be changed in the future,the company reserve the right to change
the data without any advise.
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
PROFESSIONAL SHOW LIGHTING

18
Tel:[phone] Fax:[phone]
Web:www.lightsky.com.cn www.lightsky-china.com
E-mail:[e-mail] [e-mail]
[e-mail] [e-mail]
[e-mail] [e-mail]
[e-mail]
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
Add:No.51Yunfeng Rd,Xinhua Industrial Zone,Huadu District,
Guangzhou City,China.