Buderus Logamax plus GB162 User manual

Please read these instructions carefully before starting the operation
Installation instructions
Cascade frame for
Logamax plus
CAUTION!
Before putting the boiler into operation read this manual care-
fully.
WARNING!
Improper installation, adjustment, alteration, service or main-
tenance can cause injury, loss of life or property damage. Re-
fer to this manual. For assistance or additional information
consult a qualified installer, service agency or the gas suppli-
er.
CAUTION!
The operating manual is part of the documentation that is de-
livered to the installation's operator. Go through the informa-
tion in this manual with the owner/operator and make sure
that he or she is familiar with all the necessary operating in-
structions.
Notice:
This manual is available in the English and French
language.
This manual must be retained for future reference.
– Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
– What to do if you smell gas
• Do not try to light any boiler.
• Do not touch any electrical switch; do not use any
phone in your building.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
• If you cannot reach your gas supplier, call the fire
department.
– Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
Warning: If the information in these instructions
is not followed exactly, a fire or explosion may
result causing property damage, personal injury
or loss of life.
GB162-80 kW/100 kW
6720820106 (2017/05) US/CA

Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements!2
Overview Cascade frame for Logamax plus GB162-80 kW/100 kW
Fig. 1 Overview of cascade frame for Logamax plus GB162-80 kW/100 kW
1: Supports
2: Connecting frame
3: Supply and return header
4: Manual gas shutoff valve
5: Mounting bracket
6: Cascade connection set TL-inline
7: Cascade connection set TR-back-to-back
8: Pump group
9: Flange seals - gaskets
10: Low loss header
B2
B1
A1
A1
B1
B2
A2
A2
A1
A2
B1
B2
6
1
4
2
3
9
10
8
5
7
4
8

1General information
Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements! 3
Contents
1 General information . . . . . . . . . . . . . . . . . . .3
2 Items supplied with unit . . . . . . . . . . . . . . .3
2.1 Configurations . . . . . . . . . . . . . . . . . . . . . . . 4
3 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . .6
4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.1 Installing the Cascade frame . . . . . . . . . . . . 8
4.2 Installing the Boiler assembly and Pump
Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.3 Installing the insulation . . . . . . . . . . . . . . . . 9
1 General information
The installation instructions for cascade systems with
Logamax plus GB162 appliances are provided to
enable correct and easy installation.
For installation of cascade flue systems refer to the
Flue Cascade manual with number 6720646836
(EN/FR) at www.buderus.us.
The modular cascade frame consists of a number of
supports with connecting frames which are screwed
together during installation.
The compact dimensions of the individual cascade
frame parts enable simple and quick installation.
2 Items supplied with unit
Cascade frame (→fig. 2)
See also fig. 1 on page 2:
1. Pallet with cascade frame:
– supports
– connecting frame
– supply and return header
– flange seals - gaskets
– low loss header
– blank flanges
– rubber pump seals
– fixings
– fasteners
2. Box with cascade frame connection set TL-inline;
For a TL-inline configuration then 2 cascade
connection sets for the TL-inline are included.
NOTICE
Please refer to the Logamax plus
GB162-80kW/100kW Installation Instruc-
tion Manual for details on the installation,
start-up, maintenance and troubleshooting
of the boiler(s).
Fig. 2 Items supplied with the cascade frame
1
2
4
3

2Items supplied with unit
Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements!4
3. Box with cascade frame connection set TR-back-
to-back;
For a TR-back-to-back cascade connection set
then
1 TR-back-to-back cascade connection set is
included and one TL-inline cascade connection set
is included
4. Installation instructions.
Boiler (→fig. 3):
(to be ordered from your supplier)
1. Boiler with casing
2. Parallel flue adapter
3. Screws and plugs for wall bracket
4. Union nut for gas connection
5. Wall bracket
6. Condensate trap with hose
7. Supply and return union nuts with sealing rings
8. Technical documents set.
Pump group (→fig. 4):
(to be ordered from your supplier)
1. Installation instructions
2. Connection kit.
The connection kit consists of:
3. Maintenance valve(s) - fill and drain
4. Gas isolation valve
5. Flow check valve
6. Pump
7. Pressure gauge
8. Pressure relief valve.
2.1 Configurations
Buderus supplies cascade frame systems in TL and TR
configurations:
TL - Inline frame installation
All boiler assemblies are installed in one line, enabling
an easy-to-monitor installation in a narrow room.
Fig. 3 Items supplied with the boiler assembly
Fig. 4 Items supplied with pump group
1
6
2
8
3
45
7
1
7
6
2
4
3
3
85
System gross output Cascade frame
system options
TL = inline
TR = back-to-
back
Number
of boilers
GB162
Natural
gas LPG
kW
k.Btu/hr k.Btu/hr 80
kW
100
kW
290 270 80 Single installation 1 –
333 315 100 Single installation – 1
580 540 160 TL2 or TR2 2 –
623 585 180 TL2 or TR2 1 1
666 630 200 TL2 or TR2 – 2
870 810 240 TL3 or TR3 3 –
913 855 260 TL3 or TR3 2 1
956 900 280 TL3 or TR3 1 2
999 945 300 TL3 or TR3 – 3
1,203 1,125 340 TL4 or TR4 3 1
1,246 1,170 360 TL4 or TR4 2 2
1,289 1,215 380 TL4 or TR4 1 3
1,332 1,260 400 TL4 or TR4 – 4
1,536 1,440 440 TR5 3 2
1,579 1,485 460 TR5 2 3
1,622 1,530 480 TR5 1 4
1,665 1,575 500 TR5 – 5
1,826 1,710 520 TR6 4 2
1,869 1,755 540 TR6 3 3
1,912 1,800 560 TR6 2 4
1,955 1,845 580 TR6 1 5
1,998 1,890 600 TR6 – 6
2,159 2,025 620 TR7 4 3
2,202 2,070 640 TR7 3 4
2,245 2,115 660 TR7 2 5
2,288 2,160 680 TR7 1 6
2,331 2,205 700 TR7 – 7
2,492 2,340 720 TR8 4 4
2,535 2,385 740 TR8 3 5
2,578 2,430 760 TR8 2 6
2,621 2,475 780 TR8 1 7
2,664 2,520 800 TR8 – 8
Table 1 Cascade selection

2Items supplied with unit
Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements! 5
TR - Back-to-back frame installation
The boiler assemblies are installed back-to-back on
both sides of the frame, to create a compact installation
which ideally suits rectangular rooms and which
ensures the best possible access to all boilers.
The relevant configuration can be selected on the basis
of the performance required (→table 1).
Boiler assembly connection kit
The connection kit can be used both for the Logamax
plus GB162-80 kW and the GB162-100 kW boilers.
The connection kit includes a pressure relief valve, a
flow check valve, a pump and isolating valves.
The Logamax plus GB162 cascade frame and
hydraulic system can be installed in 2 different configu-
rations (→fig. 5).
The gas connection can be made to either side of the
boilers, independent of the supply- and return connec-
tions.
Low loss
header
TL- configuration
(inline)
TR- configuration
(back-to-back)
2½" TL2, TL3 TR2
3" TL4 TR3, TR4
4" 5 boilers and more
Table 2 Low loss header configuration
Fig. 5 Cascade system configuration varieties
12 12

3Dimensions
Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements!6
3 Dimensions
Fig. 6 Dimensions of cascade frame and hydraulic systems - 1
A: TL - Inline configuration
B: TR - Back-to-back configuration
1: Supply and return header
2: Low loss header
3: Enclosed welding flanges
X1 Y1
1 2 3
L1
1 2 3
1
2
3
4
0
F1
A
B
(525 mm)
20¾” (288 mm)
11¼”
32” (810 mm)
20” (510 mm)
22¾”
(575 mm)
20¾”
(525 mm)
26¾” (1722 mm)
6” (147 mm)
19½” (497 mm)
26½” (675 mm)
D1 D1
- Front view -
- Top view -

3Dimensions
Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements! 7
Fig. 7 Dimensions of cascade frame systems - 2
CAUTION
The dimensional tolerance is ± 5%.
39" (992 mm)
7" (180 mm)
67¼" (1710 mm)
9¾" (247 mm)
3½" (92 mm)
12¼" (310 mm)
- Side view -
Cascade
frame
system
Length
Width
X1 +Y1
TL2 43 3/8"
1,100 mm +1 3/8" 38 mm =44¾"
1,138 mm
22¾"
575 mm
TL3 64 1/8"
1,625 mm +1 3/8" 38 mm =65½"
1,663 mm
22¾"
575 mm
TL4 84 5/8"
2,150 mm +1 5/8" 42 mm =86¼"
2,192 mm
22¾"
575 mm
Table 3 TL-inline configurations
Cascade
frame
system
Length
Width
X1 +Y1
TR2 22 7/8"
575 mm +1 3/8" 38 mm =24¼"
613 mm
39"
992 mm
TR3, TR4 43 3/8"
1,100 mm +1 5/8" 42 mm =45"
1,142 mm
39"
992 mm
TR5, TR6 64"
1,625 mm +1¾" 45 mm =
65¾"
1,670 mm
39"
992 mm
TR7, TR8 84¾"
2,150 mm +1¾" 45 mm =86½"
2,195 mm
39"
992 mm
Table 4 TR-back-to-back configurations
Cascade frame system Header diameter D1 (inch) Length L1 (inch) F1 (flange dimension in mm)
TL2, TL3 2½ " 19" (482 mm) Blank flange C2631 37.2 NW 65/76.1 PN6
TL4, TR4 3 " 22¾" (571 mm) Blank flange C2631 37.2 NW 80/89 PN6
5 boilers and more 4 " 25½" (651 mm) Blank flange C2631 37.2 NW 100/114¼ PN6
Table 5 Header dimensions

4Installation
Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements!8
4 Installation
4.1 Installing the Cascade frame
Fix the supporting frame onto the first support of the
cascade unit with the M8 x 70 screws.
Fix the next support and continue the installation
until the cascade unit is complete.
Position the cascade frame in its final position.
Level the cascade frame both horizontally and verti-
cally by fitting additional washers below the support.
Secure the cascade frame to the floor. Make sure
that the bolts are aligned with the supports. Do not
bend or place the support under stress to make it fit.
Install the header pipe with the M8 x 70 screws.
Do not fully tighten the screws yet.
Fit the boiler mounting brackets on the top side of
the frame with M8 x 65 screws. Install the nuts at the
rear of the frame. The bottom side of the bracket
should be level with the bottom side of the frame.
4.2 Installing the Boiler assembly and
Pump Group
Hang the first boiler on the cascade frame as shown
in fig. 8 or fig. 9.
Put the boiler in the correct position and level it hori-
zontally and vertically. Use the set screws on the
lower rear of the boiler to adjust it.
Connect the pump group (see Pump group Installa-
tion instructions).
Remove the protective caps from the header.
Remove all red paint and unevenness from the
supply and return connections of the header.
Install the supply pipe(s) between the header and
the pump group.
Install the return pipe(s) between the header and the
pump group.
Repeat the above steps to install all boilers.
If required, seal off any unused connections of the
header.
Install the condensate drain pipe. Use the pre-
assembled mounting brackets on the supports for
this.
Install the low loss header with the corresponding
flange seals. Use the corresponding screws.
– 2½" low loss header M12 x 50
– 3" low loss header M16 x 55
– 4" low loss header M16 x 55.
Check the cascade system for leaks.
CAUTION
– Make sure that the cascade system is
installed on a flat surface.
– Make sure the cascade system is
installed level (use a spirit level).
– Check that the carpenters load-bearing
capacity of the floor is sufficient for the
weight of the installation (approx.
220 lbs [100 kg] for each boiler with
accessories).
NOTICE
Make sure that the slots for the boiler
mounting bracket are at the top side of the
frame.
NOTICE
For TR-back-to-back configurations, both
boiler mounting brackets are attached
simultaneously, using the M8 x 65 screws.
Fig. 8 Installation sequence for a TL-inline configuration
123
- Top view -
NOTICE
Observe the boiler installation sequence
indicated in fig. 8 and fig. 9.
Fig. 9 Installation sequence for TR-back-to-back
configuration
NOTICE
Pressure test all fittings prior to installing
covers.
13
24
- Top view -

4Installation
Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements! 9
4.3 Installing the insulation
Install the rear insulation over the header (→fig. 10,
[1]).
Install the rear insulation part over the low loss
header
(→fig. 10, [2]).
If required, trim the insulation so that it is straight
(→fig. 10, [3]).
For 2½" and 3" low loss header:
- install the inserts in the outer insulation.
For a 2½" low loss header:
- install the reducing inserts in the outer recesses
(→fig. 11, [2]).
For a 3" low loss header:
- install the reducing inserts in the inner groves
(→fig. 11, [1]).
Click the insulation together.
Install the front insulation of the low loss header.
If required, trim the insulation so that it is straight
(→fig. 10, [3]).
Install the end cover over the header (→fig. 10, [4]).
Fig. 10 Header
NOTICE
First start up the cascade system and test
the system for leaks. Then install the insu-
lation.
Fig. 11 Inner insulation
1
3
2
4
1
12
2

4Notes
Logamax plus GB162-80 kW/100 kW – Subject to modifications resulting from technical improvements!10