Buffalo AirStation WHR-600D User manual

www.bualotech.com
User Manual
AirStation
WHR-600D
AirStation
WHR-300HP2

- 1 -
Contents
Chapter 1 - Product Overview .........................................5
Package Contents ................................................................... 5
Hardware Overview ................................................................. 6
Front Panel LEDs ........................................................................... 6
Back Panel ..................................................................................... 8
Bottom ............................................................................................ 9
Chapter 2 - Installation .....................................................10
Initial Setup ............................................................................. 10
Appendix A - Specications .............................................13
WHR-600D .............................................................................. 13
WHR-300HP2 ......................................................................... 15
Appendix B - Environmental Information .......................17
Appendix C - GPL Information ........................................18

- 2 -

- 3 -

- 4 -

- 5 -
Chapter 1 - Product Overview
Package Contents
The following items are included in your AirStation package. If any of the items are missing, please
contact your vender.
• AirStation ....................................................................................................................................... 1
• AirStation Setup Card ................................................................................................................ 1
• AC adapter ..................................................................................................................................... 1
• Ethernet Cable .............................................................................................................................1
• Quick Setup Guide ...................................................................................................................... 1
• Warranty Statement ................................................................................................................... 1

1
2
3
5
4
- 6 -
Chapter 1 Product Overview
Hardware Overview
Front Panel LEDs
1AOSS button To initiate AOSS, hold down this button until the wireless LED  ashes
(about 1 second). Then, push or click the AOSS button on your wireless
client device to complete the connection. Both devices must be powered
on for this to work.
2Power/Diag LED (Green or Red)
On (Green): Power is on.
O : Power is o .
On (Green)*1: Booting.
2 blinks (Red)*2: Flash ROM error.
3 blinks (Red)*2: Wired Ethernet LAN error.
4 blinks (Red)*2: Wireless LAN error.
5 blinks (Red)*3: IP address setting error.
9 blinks (Red)*2: System error.

Chapter 1 Product Overview
- 7 -
Continuously blinking*1: Updating rmware, saving settings, or initializing settings.
*1 Never unplug the AC adapter while the Bualo LED is blinking continuously.
*2 Turn o AirStation rst, wait for a few seconds, then turn it back on.
*3 Because the network addresses of both the Internet port (WAN port) and the LAN port are the
same, it is not possible to establish communication. Change the LAN-side IP address of the
AirStation.
3Wireless LED (Green or Orange)
On: Wireless LAN is enabled.
Double blinks: AirStation is waiting for an AOSS or WPS security key.
Continuously blinking: AOSS/WPS error; failed to exchange security keys.
O: Wireless LAN is disabled.
Note:
Wireless LED is Green : Security settings have been made for the wireless LAN.
Wireless LED is Orange : Security settings have not been made for the wireless LAN.
4Internet access LED (Green)
On: Internet access is available.
O: Internet access is not available.
Router functionality is disabled.
5Router LED (Green)
On: Router functionality is enabled.
O: Router functionality is disabled.

8
10
7
6
9
- 8 -
Chapter 1 Product Overview
Back Panel
6Router Switch
On: Router functionality is enabled (router mode).
O : Router functionality is disabled (bridge/AP mode).
Auto: This switches between modes automatically based on whether or not
another router is detected on the Internet port. The default setting for
this switch is Auto.
7LAN Port Connect your computer, hub, or other Ethernet devices to these ports.
This switching hub supports 10 Mbps and 100 Mbps connections.
8Internet Port 10 Mbps and 100 Mbps connections are supported.
Note: In bridge/AP mode (router o ), the Internet port becomes a
regular LAN port, for a total of 5 usable LAN ports.
9Reset button To reset all settings, hold down this button until the Power LED turns red
(about 3 seconds). The power must be on for this to work.
10 DC connector Connect the included AC adapter here.

Label
11
Chapter 1 Product Overview
- 9 -
Bottom
11 Setup card slot This is the slot where the AirStation setup card is stored. The initial
settings for the username, password, SSID, and encryption type are
provided on the card for logging into Settings.