Bugatti MIRAGE User manual
CAUTION: Allow Lighter To Cool Down for 5 Minutes Before Touching BCU
Always Remove Gas Canister Before Replacing BCU
Press The Unlocking Lever On
The Top Side
Replace The BCU With The New
One By Aligning The Two Holes
In BCU With Two Corresponding
Rods In The Mounting Plate
Insert BCU Straight In. Release
Unlocking Lever To Lock In Place
PUS
H
P
U
S
H
•
Exercise care in use.
• Ignite lighter away from face and clothing.
• Be sure the ame is out after use.
• May contain ammable gas under pressure.
• Never expose to heat above 120°F (49°C) or to
prolonged sunlight.
• Never leave a lighter on the dashboard, or near rear
window shelf of any vehicle.
• Never puncture or put on re.
• Under no circumstances should the user tamper with the
lighter or attempt to adjust other than by using the
controls provided.
• Failure to follow instructions can result in serious
personal injury.
• Allow burner cylinder unit to cool at least 5 minutes before touching.
• Always remove gas pod before replacing burner cylinder unit.
© 2019 Bugatti Group LLC, All Rights Reserved.
