Burnside 292-DF-ADD User manual

ASSEMBLY INSTRUCTIONS
D-FRAME ADD-ON
// 292-DF-ADD
Use to add-on to the D-Frame Starter
wall system.

ASSEMBLY INSTRUCTIONS
GRAND + BENEDICTS | 800.547.7005 |www.grand-benedicts.com
D-FRAME-ADD-ON
PARTS LIST:
1. End Frame - (1)
2. Top & Bottom Rail - (2)
3. Upright Center - (1)
4. Upright Side - (2)
5. Joint Connector Single - (6)
6. 3/8”-16 TPI Leveler - (4)
7. Socket Countersunk Head Screw
1/4”-20 X 0.625
8. SBHC Screw #10 - 0.375” - (24)
9. Joint Connector Bolt
1/4”-20 X 0.625” (6)
10. Hex Nut 1/4” - 20 TPI (6)
11. Allen Wrench
1
2
3
4
6
8
7
5
2
4
9
10
11

ASSEMBLY INSTRUCTIONS
GRAND + BENEDICTS | 800.547.7005 |www.grand-benedicts.com
D-FRAME-ADD-ON
STEP ONE:
Construct the internal frame by using
the Joint Connectors, Joint Connector
Bolts & secure with Hex Nuts using the
Allen Wrench.
JOINT CONNECTOR BOLT
1/4” - 20 X 1.625”
HEX NUT
1/4” - 20 TPI

ASSEMBLY INSTRUCTIONS
GRAND + BENEDICTS | 800.547.7005 |www.grand-benedicts.com
D-FRAME-ADD-ON
STEP TWO:
Connect the End Frame to the Main
Frame using Socket Countersunk Head
Screws using the Allen Wrench.
STEP TWO:
Affix Levelers at desired height.
FIXTURE IS COMPLETE
SOCKET COUNTERSUNK HEAD SCREW
1/4” - 20 X 1.625”
End Frame
Main Frame
Levelers
COMPLETE
FIXTURE