busbi busbi7 Tablet User manual

busbi7 Tablet
Android 4.0
7” Capacitive Touch screen
User Manual

Thank you for choosing the busbi7 tablet.
The busbi7 is fully equipped to offer you the complete browsing and
multimedia experience.
Android 4.0 Operating System
7” capacitive touch screen with 800 x 480 resolution
3D Motion Sensor for automatic orientation
MicroSD and USB for added connectivity
IMPORTANT
1) Please charge the busbi7 continuously for 4 hours before
use.
2) For information on inserting/removing the Micro SD card,
please refer to section 3.4 –Storage. Failure to do so may
result in damage to the memory card.
3) Some applications run in a full screen mode. The icons on
the toolbar will not be displayed.
4) Please do not save/transfer personal/media files to the
onboard storage as this may slow down the operation of
the device

Contents
1. Accessories
2. Getting Started
2.1 Appearance
2.2 Charging the tablet
2.3 Using the tablet
2.4 Toolbar
2.5 Accessing the applications
2.6 Using basic applications
3. Settings
3.1 Wireless & networks
3.2 Sound
3.3 Display
3.4 Storage
3.5 Battery
3.6 Apps
3.7 Accounts & sync
3.8 Location services
3.9 Security
3.10 Language & input
3.11 Backup & reset
3.12 Date & time
3.13 Accessibility

3.14 Developer options
3.15 About tablet
4. Using MicroSD Card
5. Using HDMI
6. Technical features
7. Recycling
8. Troubleshooting
9. Battery Statement
1. Accessories
Inside the busbi7 packaging, you will find:
1 x 7” Tablet
1 x power adapter
1 x Quick Start Guide
1 x USB OTG cable

2. Getting started
2.1 Appearance
Fig 2.1.1
Fig 2.1.2

Button descriptions
On/Off
When the tablet is switched off, press
and hold this button to turn it on.
When the tablet is turned on, press
and hold this button to activate the
shut-down window.
VOL +
Increase the volume.
VOL -
Decrease the volume.
Return
Returns to previous screen
2.2 Charging the tablet
Plug the adapter to the mains and the DC
connector into the DC-in jack as shown in figure
2.1.1, (5V DC in). A full charge takes up to 4
hours.
2.3 Using the tablet
Power on the device
•Press and hold the Power button for 2
seconds in order to turn on the device.

Sleep mode
•Pressing the Power button will
activate/deactivate sleep mode when the
device is turned on.
Using pre-installed apps
•To open and use the pre-installed apps,
simply touch the relevant icon/app. The
main application page can be accessed by
touching the application icon , on the home
screen. See section 2.5 Using the applications,
for more
Personalising your desktop
•To add an app to the home/desktop screen,
access the applications screen (Fig 2.5.2).
Touch and hold the app you would want on
the desktop. The desktop will appear
behind the icon. Move the icon to the
desired area of the desktop and release the
icon to confirm the placement.

Deleting an icon from the desktop
•To delete an app or widget from the desktop;
press, hold and drag the icon to “x Remove”
which appears at the top of the page as
shown below in figure 2.3.1.
Fig. 2.3.1
Using Widgets on your desktop
•You can also add and delete widgets to/from
the Home screen by using the procedures
outlined in the previous two sections.

Powering off the device
•Press and hold the Power button for 2
seconds to activate the power-off screen.
Note: you can also access the Silent Mode option from
this screen.
The widget desktop
Fig.2.3.2
As shown in Fig.2.3.2, the Android 4.0 interface has a
toolbar at the bottom to the screen for ease of
navigation. In some cases, the toolbar icons will be

minimized and are denoted by grey dots. Simply touch
on the dot to re-enable the toolbar.
2.4 Toolbar
Fig.2.4.1
The toolbar is located at the bottom of the screen.
The purpose of each icon and its function is
described below: