SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 83
Skid Steer
Quick Attach
Specifications Based on 1997 ASAE STANDARDS
35 - 75
2WD/FWA
- Measured at Pivot Pin 117 inches
- Under Level Bucket 108 inches
50°
4.5 inches
to Maximum Height - At Pivot Pin 2870 lbs
to Maximum Height - 31.5 inches Forward of Pivot Pin 1985 lbs
to 59 inch Height - At Pivot Pin 3220 lbs
to 59 inch Height - 31.5 inches Forward of Pivot Pin 2390 lbs
- At Pivot Pin 3955 lbs
- 31.5 inches- Forward of Pivot Pin 2940 lbs
at Maximum Height - 31.5 inches Forward of Pivot Pin 3155 lbs
at 59 inch Height - 31.5 inches Forward of Pivot Pin 3880 lbs
at Ground Level - 31.5 inches Forward of Pivot Pin 3015 lbs
(Ground Level to Full Height) 4 seconds
(Full Height to Ground Level) 3 seconds
(Full Rollback to Full Dump) 4 seconds
(Full Dump to Full Rollback) 2.5 seconds
Two 2.25 inch Bore, 22.81 inch Stroke Double Acting Bucket Cylinders and Two 2.25 inch Bore, 23.19 inch Stroke Double Acting Lift Cylinders
2450 PSI hyd. Pressure & 11 GPM pump capacity
Available in 60, 72 and 80 inch widths
Available in 60, 72 and 84 inch widths
Forklift Attachment (42 inch tines), Round Bale Spear, Grapple Fork, Bucket Tine Teeth,
Bolt-On Digging Teeth, Side Cutting Edges, Spill Guard Attachment, Hydraulic Self-Leveling, and Grill Guards
1 year limited warranty
Available in major tractor colors
