Bush BIEF7030FF User manual

1

2
Customer service manual
Bush Built-In Combi Fridge – Freezer BIE7030FF
Contents
1
Precautions
Page 2
2
Door
Page 4
3
Glass Shelf Change
Page 6
4
Flap Cover Change
Page 7
5
Door Shelf Change
Page 8
6
Adjustable Door Shelf Change
Page 9
7
Basket, Chiller, Crisper Change
Page 10
8
Maxifresh Change
Page 11
9
Thermostat Setting
Page 12
10
Additional Support
Page 13
Precautions:
Always follow safety advice.
Always switch off and unplug the appliance before attempting to remove any part.
Always wear appropriate protective equipment when carrying out any work.
Always use the correct tools for carrying out any work.
Some repairs may not be suitable for unqualified users to carry out. If in doubt seek the advice of
a profession repairer.

3
SAFETY PRECAUTIONS

4
REPLACEMENT PROCEDURE
Applicable models
EN
General
Part name
Door
Changing the Door Swing Direction to Right Hand
1 -Unscrew the two screws fixing the top hinge (Pic-1) and remove the refrigerator door. (Pic-2)
Picture-1
Picture-2
2 - Unscrew the two screws fixing the middle hinge side bracket and remove it. (Pic-3)
Picture-3
3. Unscrew the two screws fixing the middle hinge (Pic-4) and remove the freezer door. (Pic-5)
Picture-4
Picture-5
4. Remove the bottom hinge pin (Pic-6) and insert it to the left side foot. (Pic-7)
Picture-6
Picture-7
5-Unscrew the middle hinge side bracket on the left and remove it. (Pic-8)
Remove the middle hinge screw caps (big) on the left side.
Picture-8

5
REPLACEMENT PROCEDURE
Applicable models
EN
General
Part name
Door
6-Assemble the refrigerator door. Rotate the middle hinge by 1800and screw it to the left side. (Pic-9) Than screw the middle
hinge side bracket on the middle hinge. (Pic-10)
Picture-9
Picture-10
7-Remove the top hinge screw caps (big) on the left side (Pic-11) and insert them to the right side. (Pic-12) (You can find the
new caps in the user manual bag)
Picture-11
Picture-12
8
-
Unscrew the pin of the hinge from Hole 1, rotate the top
hinge by 1800and screw the pin to Hole 2. (Pic-13)
9
-
Assemble the freezer door and screw the top hinge to the
left side. (Pic-14)
Picture-13 Picture-14
10-Screw the middle hinge side bracket on the right of refrigerator. (Pic-15) and insert the middle hinge screw caps (big) on
the right side. (Pic-16)
(You can find the new caps in the user manual bag)
Picture-15
Picture-16

6
REPLACEMENT PROCEDURE
Applicable models
EN
General
Part name
Glass Shelf Change
First gently lift the front side of glass up. Then you can pull the glass out by directly pulling towards yourself.

7
REPLACEMENT PROCEDURE
Applicable models
EN
General
Part name
Flap Cover Change
First open the flap slightly, now push the flap up from its bottom edge, focusing on only one side.
When the flap is freed from this side, repeat same operation for the other side.

8
REPLACEMENT PROCEDURE
Applicable models
EN
General
Part name
Door Shelf Change
Gently pull the shelf up using both hands, without bending or twisting the shelf.
When shelf is free from assembly details on right and left side, you can take the shelf out by pulling to yourself.

9
REPLACEMENT PROCEDURE
Applicable models
EN
General
Part name
Adjustable Door Shelf Change
First grip the door shelf by both hands, at the same time using your thumbs, pull latches on sides towards yourself.
This will unlock the mechanism, so you can lift the shelf all the way up and free the shelf from its guides on the door.

10
REPLACEMENT PROCEDURE
Applicable models
EN
General
Part name
Basket, Chiller, Crisper Change
First pull the basket out until it reaches end position. Then gently pull front side up until frees from its guides on the sides.
Finally continue pulling it out and remove it from place.