14 15Getting to know your Tower Speaker
Getting to know your Tower Speaker
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
Getting to know your Tower Speaker
You’ll be up and running in no time
Getting to know your Tower Speaker
You’ll be up and running in no time
Power connection
1. Connect the mains power lead into the socket on the back of the Tower Speaker.
2. Plug the power adaptor into the mains power wall socket and switch on.
3. Press and release the On/Off power switch on the back of the Tower Speaker. The first
time you use your product it will power on in Bluetooth mode.
4. The display will light up and the blue LED in the middle of the top front edge will begin
to flash whilst your Tower Speaker begins to search for Bluetooth devices.
Remote control
1. Pull out the safety strip on the remote control to activate the battery.
Initial set-up
In Standby mode:
1. Press and release the button on the Tower Speaker or on the Remote control. The
first time you switch on your product, it will power up in Bluetooth mode. ‘-bt-’ will
be displayed and the blue LED in the middle of the top front edge will begin to flash
whilst your Tower Speaker begins to search for Bluetooth devices.
Connect to a Bluetooth device
In Bluetooth (BT) Mode:
1. When the blue LED on the top front edge of the Tower Speaker is flashing,
2. On the device that you would like to connect to your Tower Speaker via Bluetooth
(e.g. iPhone/ iPad/Android/other phone/Tablet/Computer), turn on Bluetooth
connectivity and ensure that it is ‘discoverable’.
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to ‘Add new device’, if necessary.
Note: Some products will automatically search for a new device and so the ‘Add new
device’ option is not available.
4. When found, your Tower Speaker will be displayed as ‘Bush Tower’. Select the device
name to begin pairing.
Note: If your device requests a password, please enter ‘0000’ to complete the device
pairing.
5. When pairing is complete you will hear an audible alert and the blue LED will stop
flashing and will remain constantly on.
6. Now that you have paired your device with the Tower Speaker, it will connect to it
when it is within range, which is about 10 metres or less (33 feet or less), line of sight.
7. Your device will remain paired with the Tower Speaker unless you decide to
disconnect or ‘unpair’ it.
Note: If your Tower Speaker becomes disconnected from the other Bluetooth device
at any time, the blue LED will begin to flash as it searches for a Bluetooth connection,
select ‘Bush Tower’ on the device you wish to connect to, to reconnect.
Change the mode
On the Tower Speaker or on the Remote control:
• Press and release the Mode button to change between Bluetooth and Aux-in modes.
Please check the display, which will confirm the mode.
Note: You must connect an Aux-in cable (not supplied) to the Aux-in socket on the
back of the product, to use Aux-in mode.
