BushBaby BB4KWiFiSolarLED User manual

1Version 2.0
Bush Baby Solar LED with 4K
Wi-Fi Hidden Camera
SKU: BB4KWiFiSolarLED
All manuals and user guides at all-guides.com

2Version 2.0
THANKYOU FOR PURCHASING THE
BB4KWIFISOLARLED
Please readthis manual before operatingthe
BB4KWiFiSolarLED and keep it handy.
Your purchase should include:
1 x BB4KWiFiSolarLED
1 x Manual
1 x AC Wall Charger
1 x MicroUSB Cable
1 x MountingHardware
All manuals and user guides at all-guides.com

3Version 2.0
BEFORE YOU GET STARTED
IMPORTANT INSTRUCTIONS BEFORE GETTING
STARTED
1. In orderto operate yourdevice, you must
download the LookCamPro app to your
smartphone ortablet.
oAndroid:
www.minigadgets.com/lcpdroid
oiPhone:
www.minigadgets.com/lcpios
2. This device can only make one Wi-Fi pairing
attemptand then the TUT signal will
disappear. If the pairing process is
unsuccessfulthe device will be requiredto
be sentin fora factory reset.Please verify
the name of yourrouter’s Wi-Fi signal and
password,andfollow the steps onthe next
All manuals and user guides at all-guides.com

4Version 2.0
page to ensure yourdevice has the best
chance possible of pairing withyour router.
●This device will only connectto routersthat
produce a 2.4 GHz signal. Please contact
your internet service providerto determine
if your routeris 2.4 or 5.8 GHz.
●If your wireless networkhasa password
using any special characters, please change
it so it is using only numbers/letters.
●Turn off your phone’s mobile data prior to
connecting to the device’s wi-fisignal. Some
phoneswill ignore wi-ficonnectionsthat do
not have internetaccess if mobile data is
enabled.
●Make sure youare within 10 feetof your
routerwhen pairing the device with wi-fi. If
the device gets hardwired for power, pair
All manuals and user guides at all-guides.com

5Version 2.0
the unit by poweringit with the testplug
prior to hardwiring it in.
Note: If you are using this anywhere other than the
US, you will need to purchase a converterin order to
use the device and avoid damaging the product.
Because different countries use different voltages in
their electrical wiring, you will need a converter that
adapts to the current in yourparticular country.
IMPORTANT WARRANY INFORMATION:
If the warranty sticker on your device has been
removed or tampered with, your lifetime warranty
will be voided. You may be charged fees or denied
a return should this happen.
STEP ONE –ADDING THE DEVICE TO THE APP&
PAIRING WITH WI-FI FOR REMOTE VIEWING
Note: If you do not want to use your device for
remotely live streaming/video playback, you can still
use it as a DVR unit. You will be required to connect
All manuals and user guides at all-guides.com

6Version 2.0
your phone to the device’s wi-fi signalin order to
view the live stream, play videos back via the app,
or modify camera settings. If you wish to use it as a
DVR unit, when you get to #5 and see ‘AP added
device, whether the network?’ choose ‘No’ and
proceed to Step Two.
CONNECTING TO YOUR DEVICE’S WI-FI SIGNAL
In orderto first use your device andsetit up, you
must first connectto its wi-fisignal.
1. Powerthe device on.
●If your unit is capable of being
hardwired, eitherinsertthe test
plug that came attached with it into
an outlet, or have it professionally
hardwired into the existing
electrical system
2. Turn on your phone’s Wi-Fi andwait up to 5
minutes forthe device to generate a Wi-Fi
All manuals and user guides at all-guides.com

7Version 2.0
signal (this will match the UID on the
sticker,ex: TUTxxxxxxx)
3. Once the device generatesits Wi-Fi signal,
connectto it via the Wi-Fi settingsonyour
phone. It should display as ‘Connected’ or
‘Current Network’.
Note: Some devices may produce a warning that the
network has no internet access and will ask if you
want to use mobile/cellular data instead. Choose to
stay connected to the wi-fi connection.
Note: For iOS devices, you must wait until the Wi-Fi
signal appears next to your Phone Carrier Name at
the top of your phone screen.
4. After connecting, open the LookCamPro
App.
5. The app will automatically detectthe
camera, and display an “AP added device,
All manuals and user guides at all-guides.com

8Version 2.0
whether the network?” message. Select
“Sure”.
6. The app will take you to a new screento
selectthe networkyouwish to pair the
device with.
7. Put in the passwordforthe desired network
and press ‘Sure’. The camera will reboot
and shouldcome online within 5 minutes.
●Note: Please follow the tips on page
5 to ensure a proper connection is
formed between your device and
the router.
Note: You will be prompted to change the device
password the first time you view the camera video
feed. We suggest that you do change this to prevent
any unauthorized viewing of your camera. The
default password is 6666.
All manuals and user guides at all-guides.com

9Version 2.0
IMPORTANT: You must keep this password in a safe
place. If you ever need to access thecamera from a
different phone or reinstall the camera app, this
password willbe required to re-add the camera. If
you forget the password, a factory reset will be
required. In order to factory reset the device, it will
most likely need to be sent to us via an RMA (return
merchandise authorization). If you have any
questions regarding this, please call us at 770-694-
6921.
STEP TWO –SETTING YOURDEVICE UPTO RECORD
TO THE MICROSD CARD
Note: All steps from here onwards require you to
havecompleted step one and have already added
the device to the LookCamPro app. Do not continue
without completing step one.
All manuals and user guides at all-guides.com

10Version 2.0
Note: Your device will come with a 128GB MicroSD
card already installed in it. To get started with
capturing video, follow the steps below.
1. Open the LookCamProapplication on your
smartphone ortablet.
2. Press the settings wheelonthe far right
●This is the ⚙icon
3. You will be taken to a screenwith multiple
options. Select the ‘Record’ option. Options
will be explained below.
●Note: On iOS devices, this will be
the ‘SD Card Setting’ option.
●Record Length –This controls the lengthof your
videorecordingsand can be set between5and
30 minutes. (Note: This only controls the video
length for the ‘Throughout the Video’ and
‘Timing Video’ video modes. For controlling
video length on the ‘Alarm Video’ video mode,
please refer to Step 3)
All manuals and user guides at all-guides.com