BushBaby BB4KWiFiLight User manual

1 Version 1.3
Bush Baby 4K Wi-Fi Emergency
Light Manual
SKU: BB4KWiFiLight

2 Version 1.3
THANK YOU FOR PURCHASING THE
BB4KWIFILIGHT
Please read this manual before operating the
BB4KWiFiLight and keep it handy.
Your purchase should include:
1 x BB4KWiFiLight
1 x Manual
1 x 128GB MicroSD Card
1 x MicroSD Card Reader

3 Version 1.3
GET FAMILIAR WITH YOUR
BB4KWIFILIGHT

4 Version 1.3

5 Version 1.3
OPERATING THE BB4KWIFILIGHT
BEFORE YOU START
1. First you must download the
P2PLiveCam app from the Google Play
Store or the iPhone App Store.
oAndroid:
https://play.google.com/store/a
pps/details?id=com.g_zhang.my
p2pcam&hl=en
oiPhone:
https://itunes.apple.com/us/app
/p2plivecam/id789572618?mt=8
2. If you wish to enable SD Card recording,
you must insert a MicroSD card into the
unit. See page 4 to locate the SD card
slot.
3. If you ever need to move your device
from one network connection to a
different one, you will need to reset the
device before moving to the new

6 Version 1.3
network. Otherwise, the device will not
connect to the new network.
Note: If you are not located in the US, or if you
intend to use this product anywhere other than
the US, you will need to purchase a converter in
order to use the AC wall plug in and avoid
damaging the product. Because different
countries use different voltages in their
electrical wiring, you will need a converter that
adapts to the current in your particular country.
IMPORTANT WARRANY INFORMATION: If the
warranty sticker on your device has been
removed or tampered with, your lifetime
warranty will be voided. You may be charged
fees or denied a return should this happen.
NOTE ABOUT THE EMERGENCY LIGHT FUNCTION
1. This device functions as an emergency
light. If the location of the device loses

7 Version 1.3
power, the emergency lights will power
on, and the camera board will have
about 30 minutes of power. If power is
not restored within 30 minutes, the
camera will turn off.
2. The lights will not be powered on as
long as the device has electricity. They
will only turn on if the power goes out
or if the device loses power.
CONNECTING TO YOUR DEVICE DIRECTLY [PART
1]
In order to view your device remotely, you
must complete the following two-part
sequence of steps.
1. The Wi-Fi will activate once you plug in
your device.
2. Turn on your phone’s Wi-Fi and wait up
to 7 minutes for the device to generate
a Wi-Fi signal. The Wi-Fi Signal name will

8 Version 1.3
match the UID on the sticker on the top
of the device (see page 4).
oYou will be looking in your Wi-Fi
settings for a network that
looks like KXXXXX-
XXXXXXXXXXXX-XXXXXX.
3. Once the device generates its Wi-Fi
signal, connect to it via the Wi-Fi
settings on your phone.
NOTE: Some Android devices may produce a
warning that the network has no internet
access. If you see this, choose to connect to the
network anyway.
4. After connecting to the Wi-Fi Signal with
your mobile device, open the
P2PLiveCam App.
NOTE: For iOS devices, you must wait until the
Wi-Fi Signal appears next to your Phone Carrier
Name in the status bar at the top of your phone
screen.

9 Version 1.3
5. Once the app opens, tap the plus (+)
button at the top right of the app.
6. Tap “Search (LAN)” and the app should
show a “New Device”.
7. Tap on the New Device and all the
camera’s information will be filled in.
Note: The default password is 8888.
8. Tap “OK”.
9. Now you will see the app listed in the
home screen of the app, and it will show
“Online”. You may now tap on this
camera entry to test the video feed.
NOTE: You will be prompted to change the
device password the first time you view the
camera video feed. We suggest that you do
change this to prevent any unauthorized viewing
of your camera.
IMPORTANT: You must keep this password in a
safe place. If you ever need to access the camera

10 Version 1.3
from a different phone or reinstall the camera
app, this password will be required to re-add the
camera. If you forget the password, a factory
reset will be required. In order to factory reset
the device, it will most likely need to be sent to
us via an RMA (return merchandise
authorization). If you have any questions
regarding this, please call us.
HOW TO USE YOUR DEVICE AS A DVR UNIT
Your device can still record even without
connecting it to your home Wi-Fi network. You
will not be able to live-stream the feed if you
choose to use the device without connecting to
your home Wi-Fi. The device will only be paired
to your smartphone, and you will only be able
to control and view it when you are within its
range.
1. If you have followed the steps for
“Connecting to Your Device Directly”,

11 Version 1.3
your phone should already be paired to
the device.
2. You may still set up motion detection
recording (see page 13), and the device
will record to the inserted MicroSD card.
You will only be able to view the
recordings once you are back in range of
the device.
CONNECTING THE DEVICE TO YOUR WIFI FOR
REMOTE VIEWING [PART 2]
If you would like to live-view your camera
stream from anywhere, you will need to
complete this part 2 for connecting to your
home Wi-Fi network.
1. From the home screen of the app, tap
the settings gear next to the camera
name.
2. A menu will pop up, choose “Device
Settings”.

12 Version 1.3
oFor Android devices, the option
will be “Advanced Config”.
3. Next choose “WiFi Config”.
4. Select your network from the list of
available networks. Enter your Wi-Fi
password and press OK.
5. A dialog will pop up to confirm the
network name and password you
entered. Make sure these are correct
and then press OK.
6. The device will reboot. You will know
the device has connected to your Wi-Fi
successfully when the camera shows
“Online”in the home screen of the app.
This may take up to 5 minutes.
7. Once the device shows as Online,
confirm that it connected to your Wi-Fi
successfully by opening the settings app
on your phone and choosing your Wi-Fi
settings. If you connected successfully,
the device will no longer be generating

13 Version 1.3
its own Wi-Fi signal, and you should be
connected to your own Wi-Fi.
oNOTE: If you still see a network
broadcasting that is the named
after the UID on the back of your
device, connecting to your Wi-Fi
has failed. Please repeat steps 3-
7 above and pay careful
attention to the network
password you entered.
8. The device is now connected to your
Wi-Fi and may be accessed from
anywhere that your phone has an
internet connection.
HOW TO ADJUST THE VIDEO QUALITY OF THE
STREAM
1. Open the live video stream of your
camera.
2. Once the video is streaming, tap the
screen once to reveal the options.

14 Version 1.3
3. In the top right of the screen, there will
be a video quality setting (4K, 2K,
1080P, 720P). Choose the quality
according to your preference.
HOW TO SET UP MOTION ALARM RECORDING
1. To set up the motion alarm, return to
the home screen of the app, and tap the
settings gear next to your camera and
then choose “Device Settings”.
oFor Android devices, the option
will be “Advanced Config”.
2. Tap “Alarm Config”.
3. Tap “Motion Detection Sensitivity” and
set according to your preference. (We
suggest a setting near the middle of the
available options.)
4. Tap OK at the bottom of the screen, and
you will receive notifications on your
phone when motion is detected.

15 Version 1.3
5. To record when the alarm detects
motion, select “SD Card Record Config”
from the Settings menu.
6. Tap “Record Setting” and choose “On
Alarm”.
7. Tap OK at the bottom of your screen to
save your settings.
oNOTE: You must have a MicroSD
Card inserted into the device for
this to work. See the “Before You
Start” section for instructions.
RETRIEVE THE FILES TO YOUR PC
1. Remove the MicroSD Card from your
device. (See page 4 to locate the SD card
slot.)
2. Use the MicroSD Card Reader to
connect the MicroSD card to your
computer via the USB port.
3. Locate “Removable Disk” inside the
(My) Computer folder.

16 Version 1.3
AutoPlay Removable Disk > Open
folder to view files.
Or…
Go to Start > Computer > Removable
Disk
4. Open the Removable Disk drive.

17 Version 1.3
5. Open the folder containing the files.
6. Double click the file you want to view.
Note: You can also view, control, and delete
your MicroSD card recordings from your
smartphone app.
If you are having video playback issues, such as
a completely black video recording or “squiggly
lines”, we recommend you use VLC media
player to play back the videos. It can be
downloaded for free from www.videolan.org
COPYING AND DELETING YOUR FILES
The video files created are just like any other
file on your computer, and can be managed in
the exact same manner.
To save a file, you want to select
the file, right click your mouse
on the file name, and then
choose “Copy” from the menu.

18 Version 1.3
Next, go the location you want
the save the file to. Right click
your mouse, and then chose
“Paste.” This will copy the file to
your computer.
To delete a file, right click your
mouse on the file name and
choose “Delete” from the menu.
You can quickly select all of the
files by pressing “CTRL+A” on
your keyboard.
If you are using MAC OS X, you
must empty the trashcan after
you delete a file. If this is not
done, the SD card will fill with
hidden files, and the device will
no longer record new files.

19 Version 1.3
TROUBLESHOOTING
THE DEVICE WON’T TURN ON
Make sure the device is plugged into an
electrical outlet.
Make sure the outlet has power.
CANNOT RECORD TO MICROSD CARD
Confirm you have inserted a MicroSD
Card into the unit.
HOW TO SOFT RESET THE DEVICE
You can reset the camera from the app
by opening the app, going to the
device’s settings, scrolling to the
bottom, and selecting “Reset Device”.
You do not have to delete the app in
order to reset the device.

20 Version 1.3
HOW TO FACTORY RESET THE DEVICE
A factory reset will restore all settings to
their original factory settings.
Most of the time, you will need to send
the device in for us to perform a factory
reset. Please contact us at the number
below for more information.
CAN’T FIND DEVICE’S WIFI SIGNAL
Please unplug the device, wait 30
seconds, plug your camera back in, and
try again.
THE APP CANNOT FIND THE CAMERA AFTER
CHOOSING “SEARCH/LAN”
Ensure you are still connected to the
device’s Wi-Fi signal by going to your
phone’s Wi-Fi settings.